VIEWI new001

Contents

VIEWI LED Turn Signal Light Bulb User Manual

Model: new001

1. Introduction

Thank you for choosing the VIEWI LED Turn Signal Light Bulb. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED bulbs. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

  • Always turn off the power to the lamp holder before attempting to remove or install any light bulb.
  • Ensure the bulb type and voltage are compatible with your vehicle's electrical system to prevent damage.
  • Do not touch the LED chips directly when the bulb is operating, as they can be hot.
  • Keep out of reach of children.
  • Dispose of old bulbs responsibly according to local regulations.

3. Specifications

FeatureSpecification
Brand NameVIEWI
Model Numbernew001
Item TypeLED bulbs
LED Bulb TypeCar Bulb
Base TypeBA15D (also compatible with BA15S, BAY15D)
Compatible Sockets1156, BA15S, P21W, 1156A, 1156NA, 87, 93, 97, 97A, 97NA, 199, 631, 1073, 1095, 1141, 1195, 1295, 2396, 3497, 5007, 5008, 7506, 12088, 1295NA, 1157 BAY15D, 1016, 1034, 1157, 1157A, 1178A, 1196, 2057, 2057A, 2357, 2357A, 2357NA, 2397, 3496, 7528, 94
Power SourceDC
Voltage12V to 24V (Operating range 11-50V)
Wattage2W/Bulb
Luminous Flux249 Lumens & Under
Color Temperature<2700K (Warm White), 6000K-6500K (Cool White), Red
LED ChipsCOB Filament, 2pcs
LED Chip BrandEpistar
LED Chip Model3014
Beam Angle360°
Average Life (hrs)50000H
Power Tolerance3%
ShapeGlobe
Length0.5 (unit not specified, likely inches or cm)
Area3-8㎡
Is Smart DeviceNo
CertificationCE, ROHS
OriginMainland China
Package1pcs bulbs
Warranty Period1 Year
Product size diagram showing a bulb with 25mm width and 50mm height.
Figure 1: Product Dimensions (25mm width, 50mm height)

4. Package Contents

Your package should contain:

  • 1 x VIEWI LED Turn Signal Light Bulb

5. Setup and Installation

Follow these steps to install your LED bulb:

  1. Turn off Power: Before starting, ensure the power to the lamp holder is completely turned off to prevent electrical shock.
  2. Remove Old Bulb: Carefully remove the existing light bulb from the lamp holder.
  3. Install LED Bulb: Insert the new VIEWI LED bulb into the lamp holder. Ensure it is seated firmly and correctly according to the base type (BA15S, BAY15D, or BA15D).
  4. Turn on Power: Once the bulb is securely installed, restore power and test the light.
Diagram illustrating the steps to remove an old bulb and install a new LED bulb into a lamp holder.
Figure 2: Installation Steps

6. Operating Instructions

These LED bulbs are designed for various automotive lighting applications, including turn signals, brake lights, tail lights, backup lights, and interior bulbs. Once installed, the bulb operates by simply turning on the corresponding light switch in your vehicle.

Video 1: Demonstration of LED bulb operation and voltage testing, showing different light colors (yellow, white, red) and their performance at various voltages (12V, 24V).
Image showing a red LED bulb and a white LED bulb being tested with a DC power supply, displaying current and voltage readings (12V and 24V).
Figure 3: Voltage Testing and Light Output (Red and White)
Two LED bulbs, one with yellow filaments and one with red filaments, next to diagrams of BA15S, BAY15D, and BA15D bases. Below are examples of yellow, white, and red light output.
Figure 4: Bulb Types and Emitting Colors

7. Maintenance

VIEWI LED bulbs are designed for long-lasting performance with minimal maintenance. To ensure optimal lifespan and brightness:

  • Cleaning: If necessary, gently wipe the bulb's glass surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically check the bulbs for any signs of damage or loose connections.
  • Storage: If storing spare bulbs, keep them in their original packaging in a cool, dry place.

8. Troubleshooting

If your LED bulb is not functioning as expected, consider the following:

  • Bulb Not Lighting Up:
    1. Check Power: Ensure the vehicle's light switch is on and the circuit is receiving power.
    2. Secure Connection: Verify that the LED bulb is correctly and firmly seated in the lamp holder. A loose connection is a common cause of non-functionality.
    3. Voltage Compatibility: Confirm that your vehicle's voltage (12V or 24V) matches the bulb's operating range. While the bulb supports 12V-24V, extreme voltage outside this range (e.g., 11-50V) might cause issues or damage.
    4. Polarity: Some LED bulbs are polarity-sensitive. If it doesn't light up, try rotating the bulb 180 degrees in the socket (if applicable for your base type) or reversing the wiring if it's a custom installation.
    5. Faulty Bulb: If all other checks fail, the bulb itself might be faulty. Try testing with another known-good bulb.
  • Flickering: Flickering can sometimes occur due to incompatible vehicle systems (e.g., CANBUS systems). A load resistor might be required (not included) to resolve this.

9. User Tips

  • When replacing multiple bulbs, ensure all are functioning correctly after installation. If one bulb is not working, double-check its connection and the power supply before assuming it's defective.
  • For vehicles with sensitive electrical systems, consider purchasing CANBUS-compatible LED bulbs or installing load resistors to prevent 'bulb out' warnings or hyper-flashing.
  • Always verify the base type (e.g., BA15S, BAY15D, BA15D) of your original bulb before purchasing replacements to ensure a perfect fit.

10. Warranty and Support

This VIEWI LED Turn Signal Light Bulb comes with a 1-Year Warranty Period from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact the seller directly through the platform where you made your purchase. Please provide your order number and a detailed description of the issue to expedite assistance.

For additional information or to view the user manual in PDF format, please refer to the following resource: User Manual (PDF)

© 2024 VIEWI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.