1. Introduction
The MYOSLIM 808nm Diode Laser Hair Removal Machine is a professional-grade device designed for effective and painless hair removal, skin rejuvenation, and other aesthetic treatments. Utilizing advanced diode laser technology with multiple wavelengths (755nm, 808nm, 1064nm), it targets hair follicles with precision, offering permanent hair reduction and improved skin quality. This manual provides essential information for the safe and efficient operation of your device.
808 Hair Removal Principle
The 808nm hair removal instrument operates on the photothermal principle of laser and the selective black absorption principle. This means the laser energy is selectively absorbed by the melanin in the hair follicle, effectively destroying the follicle to achieve permanent hair removal. By targeting the root of the hair follicle, new hair growth is prevented once the follicle is completely dead.
2. Safety Information
Please read and understand all safety precautions before operating the device. Improper use can result in injury or damage to the equipment.
- Always wear appropriate laser safety glasses during operation to protect your eyes from laser radiation.
- Ensure the treatment area is clean and free of any lotions, makeup, or deodorants.
- Perform a patch test on a small area of skin before full treatment to assess skin reaction and determine appropriate settings.
- Do not operate the device on irritated, broken, or infected skin.
- Keep the device away from water and other liquids to prevent electrical shock.
- Only use distilled water for the cooling system.
- In case of emergency, immediately press the red emergency stop switch.
- This device is intended for professional use only. Operation by untrained individuals is not recommended.
3. Product Overview
The MYOSLIM 808nm Diode Laser Hair Removal Machine features a user-friendly design with key components for efficient operation.


Key Components:
- Aluminum Alloy Bracket: Used to securely hold the laser handle when not in use. Insert the bracket base, tighten screws, and hang the handle.
- CNC Screen (12.1 inch HD touch screen): The main interface for controlling the device, adjusting parameters, and selecting treatment modes.
- 808 Handle: The treatment applicator, designed for safe, painless, and fast procedures.
- Emergency Stop Switch: A prominent red button for immediate shutdown of the device in case of an emergency, providing effective protection for the circuit board.
- Key Switch: Used to power on (turn right) and power off (turn left) the main unit.
4. Setup Instructions
Follow these steps to set up your MYOSLIM 808nm Diode Laser Hair Removal Machine:
- Unpacking: Carefully remove all components from the packaging. Inspect for any signs of damage during transit.
- Bracket Assembly: Insert the aluminum alloy bracket base into its designated slot on the main unit. Secure it by tightening the screws. Once assembled, the laser handle can be safely placed on the bracket.
- Water Filling: This is a critical step for the cooling system. Locate the water inlet and outlet ports on the rear of the machine. Connect the provided funnel and hose to the water inlet. Slowly pour distilled water into the machine until it flows out of the overflow port. Ensure the system is completely filled and free of air bubbles.
- Power Connection: Connect the power cable to the machine and then to a suitable electrical outlet (110V).
Water Filling Demonstration:
This video demonstrates the process of filling the machine with water and connecting the handle.

5. Operating Instructions
Familiarize yourself with the touch screen interface and treatment parameters.
- Power On: Insert the key into the key switch and turn it to the right to power on the device. The touch screen will illuminate.
- Language Selection: If needed, navigate to the settings menu (often represented by a gear icon) to select your preferred language. The device supports multiple languages.
- Function Selection: From the main screen, select the desired function, typically labeled "DIODE LASER".
- Parameter Adjustment: The interface allows adjustment of key treatment parameters:
- Pulses (ms): Adjust the pulse duration.
- Fluence (J/cm²): Adjust the energy density.
- Frequency (Hz): Adjust the repetition rate of the laser pulses.
The screen also displays current temperature and cooling status. Ensure the cooling system is operating effectively for patient comfort and device longevity.
- Treatment Mode Selection: The device typically offers different modes such as HR (Hair Removal), SHR (Super Hair Removal), and SR (Skin Rejuvenation). Select the appropriate mode for your treatment.
- Start Treatment: Once parameters are set, press the 'Start' button on the screen. The laser handle will be ready for use.
- Power Off: After use, press the 'Stop' button on the screen, then turn the key switch to the left to power off the device.


6. Scope of Instrument Therapy
The MYOSLIM 808nm Diode Laser Hair Removal Machine is versatile and can be used for a variety of aesthetic treatments:




7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your device.
- Cleaning: Regularly clean the exterior of the machine and the laser handle with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
- Water Replacement: Replace the distilled water in the cooling system every 1-2 months, or as recommended by usage frequency. This prevents mineral buildup and ensures efficient cooling.
- Filter Cleaning: Check and clean any air filters regularly to maintain proper airflow and prevent overheating.
- Storage: When not in use, store the device in a clean, dry environment, away from direct sunlight and extreme temperatures. Ensure the handle is securely placed in its bracket.
8. Troubleshooting
If you encounter any issues with your device, refer to the following common problems and solutions:
- Device Not Turning On: Check if the power cable is securely connected and the key switch is turned to the 'ON' position. Ensure the emergency stop button is not engaged.
- No Laser Output: Verify that the treatment parameters are correctly set on the screen and the 'Start' button has been pressed. Check for any error messages on the display. Ensure the handle is properly connected.
- Overheating Warning: Check the water level in the cooling system. Ensure the water is clean and has been replaced recently. Clean any blocked air vents or filters.
- Screen Unresponsive: Try restarting the device using the key switch. If the issue persists, contact technical support.
For complex issues not listed here, please refer to the detailed user manual PDF or contact customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Product Name | 808nm Diode Laser Instrument |
| Brand Name | MYOSLIM |
| Epilating Wavelength | 808nm (also 755nm, 1064nm options) |
| Spot Size | 13mm*27mm |
| Energy Level | 100-2500 |
| Weight | 17kg |
| Outer Packaging Size | 49cm*39cm*55cm |
| Voltage | 110V |
| Power Type | Electric |
| Use | BODY, Bikini, Face, Underarm |
| Item Type | Epilator |
| Certification | CE, RoHS, CE/ROSH |
| Cooling System | Water + air + semiconductor |
| Frequency | 1-10HZ |
10. User Tips
While no specific user reviews or Q&A were provided, general tips for diode laser hair removal include:
- Always ensure the skin is clean-shaven before treatment for optimal laser absorption by the hair follicle.
- Apply a cooling gel to the treatment area to enhance comfort and protect the skin.
- Maintain consistent treatment schedules as recommended by a professional for best results.
- Avoid sun exposure before and after treatment to prevent skin sensitivity and complications.
11. Warranty and Support
The MYOSLIM 808nm Diode Laser Hair Removal Machine comes with a 1-year warranty. For any technical assistance, operational queries, or support needs, please utilize the following resources:
- Online Support: Access online resources and FAQs for common questions.
- Video Technical Support: Available for visual guidance on setup, operation, and troubleshooting.
- User Manual (PDF): A comprehensive digital user manual is available for detailed instructions and information. You can view the PDF manual here.