Tuya Temperature Humidity Sensor

Contents

Tuya Zigbee Smart Temperature Humidity Sensor User Manual

Model: Temperature Humidity Sensor

Brand: Tuya

1. Introduction

The Tuya Zigbee Smart Temperature Humidity Sensor is a home indoor hygrometer and thermometer designed for smart home integration. It provides accurate temperature and humidity readings, allowing for remote monitoring and control via a smartphone application. This sensor is compatible with smart assistants like Amazon Alexa and Google Assistant, enhancing your smart home experience.

This device requires a Zigbee gateway to function. It is not a standalone Wi-Fi device.

2. Safety Information

  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble or repair the device yourself.
  • Use only specified battery types (2*AAA).
  • Keep out of reach of children.
  • Avoid placing the sensor in direct sunlight or near heat sources, as this may affect accuracy.

3. Package Contents

Please check the package for the following items:

  • Temperature & Humidity Sensor Unit
  • User Manual
  • Reset Pin

4. Specifications

Feature Specification
Product Name Temperature & Humidity Sensor
Product Size 70mm x 25mm x 20mm
Input Voltage DC3V (2 x AAA batteries)
Quiescent Current ≤30uA
Low Power Undervoltage ≤2.7V
Control Mode Zigbee
Wireless Protocol Zigbee 3.0
Zigbee Working Frequency 2.400GHz-2.484GHz
Working Temperature -10℃ to +55℃
Working Humidity 10% to 90%RH
Temperature Accuracy ±0.3℃
Humidity Accuracy ±3%RH
Sampling Time One acquisition per minute (60 seconds)
Battery Life Over 6 months (normal use)
Compatibility All Compatible (Works with Alexa, Google Assistant)
Certification CE, FCC, RoHS
Required Zigbee Gateway
App Smart Life APP / Tuya APP

Upgrade Comparison table showing improved accuracy, faster sampling, and longer battery life for the sensor. Figure 1: Upgrade Comparison - Highlighting improved accuracy, faster sampling, and extended battery life.

Diagram showing high precision sensors for temperature and humidity measurement. Figure 2: High Precision Sensors - Illustrating the advanced probes for accurate and stable measurements.

Battery level indicator showing low power consumption and long battery life. Figure 3: Low Power Consumption - Visual representation of the sensor's extended battery life.

5. Setup Instructions

5.1. Battery Installation

  1. Push the mounting bracket upward and gently remove it from the sensor unit.
  2. Insert two AAA batteries into the battery compartment, ensuring correct polarity as indicated by the graphics inside the bin.
  3. After the batteries are loaded, the indicator lights will briefly turn on and then off, confirming power.
  4. Reattach the mounting bracket.

Diagram showing how to open the sensor and insert AAA batteries. Figure 4: Battery Installation - Step-by-step guide for inserting batteries.

5.2. App Download and Registration

  1. Scan the QR code provided in the manual or search for "Smart Life" or "Tuya Smart" app in your smartphone's app store (Google Play Store for Android, Apple App Store for iOS).
  2. Download and install the application.
  3. Register for an account using your email address and log in.

Image showing the sensor and a note that it needs a Zigbee gateway. Figure 5: Sensor with Zigbee Gateway Requirement - Emphasizing the need for a gateway.

5.3. Device Pairing (Zigbee Gateway Required)

Important: This Zigbee sensor requires a compatible Zigbee gateway to function. Ensure your smart host (gateway) is already added to your Smart Life/Tuya Smart app and is within effective coverage.

  1. Ensure your smartphone is connected to the same network as your intelligent gateway.
  2. Open the Smart Life/Tuya Smart app.
  3. Navigate to the "Smart Gateway" page within the app.
  4. Tap the "Add Sub Device" button.
  5. Select "Temperature and Humidity Sensor" from the list of devices.
  6. Using the provided reset pin, insert it into the reset hole on the sensor (refer to Figure 6 for location) and hold for more than 5 seconds until the indicator light flashes.
  7. Follow the on-screen instructions in the app to complete the device addition process.
  8. Once successfully added, you can find the device listed in your "My Home" or "All Devices" list.

Diagram illustrating the connection process: smartphone to Wi-Fi router, then to smart host (gateway), and finally to the Zigbee sensor. Figure 6: Product Installation & Connection - Visualizing the network setup for the sensor.

Video 1: Product Setup and App Demonstration - A visual guide to installing batteries, pairing the device, and using the app interface.

6. Operating Instructions

6.1. APP Remote Control

Once paired, you can remotely monitor the temperature and humidity readings from anywhere at any time using the Smart Life/Tuya Smart app on your smartphone.

Smartphone displaying the app interface for remote control of the temperature and humidity sensor. Figure 7: APP Remote Control - Demonstrating remote access to sensor data via the app.

6.2. Customize Your Own Scenes

The app allows you to create custom automation scenes based on temperature and humidity levels. For example, you can set up rules to automatically turn on a humidifier when humidity drops below a certain percentage or activate an air conditioner if the temperature exceeds a set threshold. This helps you maintain a comfortable and organized living environment.

Examples of smart home scenes controlled by the sensor, such as activating a humidifier or air conditioner. Figure 8: Customize Your Own Scenes - Illustrating how the sensor can automate home devices.

6.3. Data Storage and Records

The sensor continuously monitors and records environmental data. You can view historical temperature and humidity trends within the app, allowing you to track changes over time and make informed decisions about your indoor climate.

App interface showing historical data records for temperature and humidity. Figure 9: Data Storage & Records - Displaying the app's capability to log and visualize environmental data.

6.4. Abnormal Alarm Function

You can set custom high and low thresholds for both temperature and humidity in the app. If the current readings exceed or fall below these set limits, the sensor will automatically trigger an alarm, and the app will send a push notification to your smartphone, keeping you informed of critical changes.

Diagram showing an alarm notification on a smartphone when temperature or humidity exceeds set limits. Figure 10: Abnormal Alarm - Illustrating how the sensor alerts users to out-of-range conditions.

7. Maintenance

7.1. Battery Replacement

When the battery level is low (indicated by a low battery alert in the app or if the device stops reporting data), replace the two AAA batteries following the installation steps in Section 5.1.

7.2. Cleaning

Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or sprays, as they may damage the internal components.

8. Troubleshooting

  • Device not connecting to app: Ensure your Zigbee gateway is powered on and connected to the internet. Verify your smartphone is on the same Wi-Fi network. Try resetting the sensor by holding the reset button for 5+ seconds until the indicator flashes, then re-attempt pairing.
  • Inaccurate readings: Ensure the sensor is placed in a stable environment, away from direct sunlight, drafts, or heat/cold sources. Allow a few minutes for readings to stabilize after placement or battery change.
  • Low battery alert: Replace the two AAA batteries as described in Section 5.1.
  • No data updates: Check the battery level. Ensure the sensor is within range of the Zigbee gateway. Verify the gateway has a stable internet connection.

9. User Tips

  • Gateway is Essential: Remember that this is a Zigbee sensor and requires a Zigbee gateway to connect to your smart home network and the app. It cannot connect directly via Wi-Fi.
  • Optimal Placement: For the most accurate readings, place the sensor in a central location within the room, away from windows, vents, or appliances that generate heat or moisture.
  • Automation Potential: Explore the automation features within the Smart Life/Tuya Smart app to link the sensor's readings with other smart devices (e.g., smart humidifiers, air conditioners, fans) to create an intelligent and responsive home environment.

10. Warranty and Support

This product is certified with CE, FCC, and RoHS standards. For specific warranty details and technical support, please contact the seller or refer to the official product page where you purchased the device.

For detailed instructions and further information, please refer to the official user manual PDF available at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.