Introduction
Thank you for choosing the RveTee 3D Anti-Collision Wall Pads. These decorative soft foam panels are designed to enhance home safety, especially for children, while adding a stylish touch to your living space. They are eco-friendly, provide noise insulation, and are easy to install.
Safety & Warnings
Warning: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep out of reach of small children to avoid accidental injury or choking hazard.
- Do not place near fire, high temperature, or flammable materials.
- For decorative and daily use only; not a toy.
- Avoid strong impact, falling, or heavy pressure to prevent damage.
- Do not use sharp objects to scratch or clean the product.
Product Features
- Child Protection: Soft foam brick wall pads protect children from accidental bumps and scrapes.
- Eco-friendly & Safe: Dyed with environmentally friendly water-based paint, which does not emit harmful chemical odors. Close to 0 formaldehyde.
- High-Quality Materials: Made with 35D high elastic sponge for soft feel and good cushioning. Features super scratch-resistant PU leather.
- Waterproof & Easy to Clean: PU leather surface is waterproof and stain-resistant, allowing for easy cleaning with a single wipe.
- Noise Insulation: Contributes to a quieter environment.
- Stylish & DIY: Simple design suitable for modern decor. Can be used as decorative headboards or accent panels.
- Easy Installation: Self-adhesive backing for peel-and-stick application, no screws or hardware needed.
- Thickness: 10mm (0.39 inches) for effective cushioning.
Specifications
| Attribute | Value |
|---|---|
| Product Name | 3D Anti-Collision Wall Pads |
| Brand | RveTee |
| Material | XPU + PU (35D high elastic sponge, scratch-resistant PU leather) |
| Dimensions (each panel) | 50cm (19.68 inches) Length x 23cm (9.05 inches) Width |
| Thickness | 10mm (0.39 inches) |
| Package Quantity | 5 wall stickers per set |
| Origin | Mainland China |
| Pattern Type | 3D Sticker |
Setup & Installation
The RveTee 3D Anti-Collision Wall Pads feature a convenient peel-and-stick design for easy installation without the need for screws or additional hardware.
Installation Steps:
- Prepare the Surface: Ensure the wall surface is clean, dry, and smooth. Remove any dust, dirt, or loose paint.
- Measure and Plan: Measure the area where you intend to install the panels. Plan your layout to ensure a symmetrical and aesthetically pleasing arrangement.
- Peel the Backing: Carefully peel off the protective film from the adhesive backing of the wall panel.
- Position and Stick: Align the panel with your desired position on the wall. Press firmly from the center outwards to ensure good adhesion and remove any air bubbles.
- Repeat: Continue with the remaining panels, ensuring they are aligned properly.
Tip: Due to the strong adhesion, if you anticipate needing to reposition or remove the panels in the future without damaging the wall paint, consider applying masking tape to the wall first. After 24 hours, you can then stick the wall panels onto the masking tape.
Usage
These 3D Anti-Collision Wall Pads are versatile and can be used in various settings:
- Children's Bedrooms & Playrooms: Provides a soft, protective barrier against bumps and falls.
- Headboards: Create a comfortable and stylish headboard for beds.
- Decorative Wall Panels: Add a modern and elegant touch to any room, including living rooms, offices, or nurseries.
- Home Safety: Ideal for areas where children might play or where extra cushioning is desired.
Maintenance & Cleaning
To ensure the longevity and appearance of your RveTee 3D Anti-Collision Wall Pads, follow these maintenance and cleaning guidelines:
- General Cleaning: Please clean the product with a soft dry cloth before use and for regular maintenance.
- Stain Removal: The PU leather surface is waterproof and stain-resistant. For spills or stains, simply wipe clean with a damp cloth.
- Avoid Soaking: Do not wash with water or soak in liquid for a long time.
- Storage: Avoid direct sunlight, high temperature, and humid environments for long-term storage.
- Handling: Do not drop, hit, or apply heavy pressure to the product.
- Chemicals: Keep away from fire, sharp objects, and corrosive chemicals.
Troubleshooting
Panels are bent or deformed upon arrival:
If the panels arrive bent or deformed, which can affect their adhesion to the wall, please consider the following:
- Gentle Reshaping: For minor bends, gently try to flatten the panels by placing them under heavy, flat objects for a few hours or overnight.
- Heat Application (Caution): A hairdryer on a low heat setting can sometimes help soften the material for reshaping. Apply heat evenly and gently, being careful not to overheat or damage the material. Allow to cool in a flat position.
- Contact Support: If panels are significantly damaged or cannot be reshaped to lay flat against the wall, contact customer service for assistance. Ensure to provide details and, if possible, photos of the damaged panels.
User Tips
- Pre-plan Layout: Before peeling the adhesive, arrange the panels on the floor or hold them against the wall to visualize the final look and ensure you have enough pieces for your desired pattern.
- Clean Wall Thoroughly: A clean, smooth surface is crucial for optimal adhesion. Any dust or debris can compromise the stickiness.
- Use Masking Tape for Temporary Placement: If you're unsure about the final placement or want to protect your wall paint, apply masking tape to the wall first, then stick the panels onto the masking tape. This allows for easier removal or repositioning.
- Measure Carefully: The panels are 50cm (19.68 inches) long and 23cm (9.05 inches) wide. Measure your space accurately to determine how many panels you need and how they will fit.
Warranty & Support
For any questions, concerns, or support regarding your RveTee 3D Anti-Collision Wall Pads, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty details, if applicable.
Manufacturer: Harbin Qingxuan Trade Co.Ltd
EU Authorized Representative: Synertrade FR SAS
For further assistance, you may refer to the User Manual (PDF) for additional information.