Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya Smart Bluetooth Door Lock. This advanced electronic lock offers multiple unlocking methods including fingerprint, app, IC card, mechanical key, and passcode, enhancing your home security and convenience. Please read this manual carefully before installation and use, and keep it for future reference.
Image: Front and back view of the smart door lock with keypad, fingerprint sensor, and app interface.
Important Safety Notes
- Ensure batteries are installed only after the door lock is fully installed.
- The lock's rotating components must operate smoothly and flexibly.
- Use high-quality LR03 alkaline batteries. Ensure all 4 batteries are brand new before closing the battery cover.
- This lock requires a mechanical key for manual unlocking. Store the mechanical key in a secure place for immediate use when needed, separate from the lock.
- Replace batteries immediately when the low voltage alarm sounds. Do not mix new and old batteries or different types of batteries.
- Keep your fingers clean and dry when using the fingerprint sensor.
- When paired with a Bluetooth gateway, this door lock enables remote unlocking without the need for a wake-up.
Package Contents
Please verify that all components are present and in good condition:
Image: List of product components including front and rear panels, latch, strike plates, IC cards, keys, and various screws.
| Item | Quantity |
|---|---|
| Front Panel | 1 |
| Rear Panel | 1 |
| Latch | 1 |
| Strike Plate | 1 |
| Strike Box | 1 |
| IC Card | 2 |
| Key | 2 |
| 95mm Square Bar | 1 |
| 125mm Square Bar | 1 |
| 35mm Screw Tube | 3 |
| 45mm M4 Screw | 3 |
| 55mm M4 Screw | 3 |
| M4x21 Screw | 4 |
Technical Specifications
| Feature | Specification |
|---|---|
| Unlocking Methods | Fingerprint, APP, IC Card, Key, Passcode |
| Admin ID Range | 3 |
| User ID Range | 197 |
| Max Unlock Records Capacity | 200 (fingerprints/PINs/IC cards) |
| Fingerprints Capacity | Up to 100 sets |
| PIN Capacity | Up to 100 sets (16-digit virtual password for eavesdropping prevention) |
| IC Cards Capacity | Up to 100 sets |
| Power Supply | 6V (4 AAA batteries) |
| Standby Power Consumption | <65 μA |
| Operating Power Consumption | ≤250 mA |
| Low Voltage Alert | 4.5V ± 0.2V (indicator flashes three times when below 4.3V) |
| Emergency Power Port | 5V 1A Type-C (power supply only, not for charging) |
| Operating Temperature | -20°C to 70°C |
| Operating Humidity | 20% to 90% RH |
| Compatible Door Thickness | 30-60 mm |
| Doorknob Function | Biometric, Key & Keypad |
| Smart Home Platform | Tuya |
| Certification | CE, RoHS |
Image: Detailed product dimensions and lock core distance measurements.
Installation Guide
Pre-installation Notes:
- Before purchasing and installing, please verify that the lock is compatible with your door's thickness (30-60 mm).
- A Bluetooth gateway or multi-mode gateway is required to enable remote unlocking functionality via the app.
Door Thickness Measurement:
- For doors 30-40 mm thick, use a 95 mm square rod.
- For doors 40-50 mm thick, use a 95 mm square rod with a spring.
- For doors 50-60 mm thick, use a 125 mm square rod.
Diagram of Door Lock Installation:
Image: Detailed diagram showing the various components and their positions during door lock installation.
Step-by-Step Installation:
- Install the lock body properly: Ensure the lock body is correctly aligned and secured within the door frame.
- Install nuts onto the exterior door handles: Secure the exterior handle by tightening the nuts.
- Run the lock's built-in wires through the square pole: Carefully thread the internal wiring through the square spindle hole to connect the front and rear panels.
- Align the square drive bar precisely and insert it through the lock body: Insert the square drive bar, ensuring it engages correctly with the latch mechanism.
- Install high-quality batteries: To ensure optimal performance, insert 4 new AAA batteries into the rear panel's battery compartment.
- Install and tighten the screws: Secure the rear panel to the door using the provided screws.
- Connect the interface: Connect the wire interface between the front and rear panels.
- Install and tighten the remaining screws: Complete the assembly by tightening all remaining screws.
Image: Visual guide for the step-by-step installation process of the smart door lock.
Connecting with the App
To manage your smart lock via your smartphone, download the Tuya Smart App:
- Download the Tuya Smart App: Scan the QR codes below or search for "Smart Life" or "Tuya" in your mobile application market.
- Open Bluetooth and Location: Enable Bluetooth and Location services on your phone, then open the Tuya Smart App.
- Add Device: From the main interface, click "Add Device" and follow the on-screen prompts to connect your smart lock.
- Connection Success: Once connected, you can enter the homepage to add users, manage members, or change names.
- Remove Device: To remove the device, navigate to the device settings within the app and select "Remove Device". Confirm unbinding and data wipe if prompted.
Image: QR codes for downloading the Tuya Smart App.
Image: Screenshots illustrating the app connection process, from main interface to adding a device.
Unlocking Methods
Your smart lock supports multiple secure unlocking methods:
1. Fingerprint Unlock
To enroll a fingerprint:
- In the app, click the "Add" button for Fingerprint.
- Place the center of your finger on the sensor.
- Once the collection is successful, remove your finger.
- Repeatedly capture five distinct fingerprint locations to complete enrollment.
Image: Demonstrating fingerprint unlock and the app interface for enrollment.
2. Password Unlock
To record a password:
- In the app, click the "Add" button for Password.
- Enter a 6-digit door-opening password.
- Click "Save".
Fake-PIN-Code Feature: To prevent eavesdropping, you can enter any random numbers before and after your correct PIN (up to 16 digits total). The lock will recognize the correct PIN within the sequence.
Image: Illustration of the Fake-PIN-Code feature for enhanced security during password entry.
3. IC Card Unlock
To enroll an IC card:
- In the app, click the "Add" button for IC Card.
- Hold the IC card near the door handle sensor area for 5 seconds until registered.
Image: Demonstrating the access card unlock method.
4. Temporary Password for Visitors
The app allows you to create temporary passwords for guests or service providers:
- In the app, navigate to the "Temporary Code" section.
- Choose between Custom, Time-Limited, or One-Time password options.
- Set the desired parameters (e.g., effective time, expiration time).
- Generate and share the temporary password.
Image: The temporary password feature, ideal for granting access to visitors without waiting.
5. Normally Open Mode
For free entry and exit, you can activate the Normally Open Mode:
- Open Mode: Long press the lock button for 1.5 seconds. The lock will beep once to activate normally open mode.
- Reset: Press and hold the reset pin. Wait for five beeps to complete the reset and exit normally open mode.
Image: Instructions for activating and resetting the Normally Open Mode.
6. Mobile Remote Unlocking
With a connected Bluetooth gateway, you can unlock your door remotely from anywhere:
- Ensure your smart lock is paired with a Bluetooth gateway.
- Use the Tuya Smart App to send unlock commands remotely.
Image: Mobile remote unlocking in action, requiring a gateway for functionality.
Maintenance
- Battery Replacement: When the low voltage alarm sounds, replace all four AAA batteries immediately. Do not mix old and new batteries or different brands.
- Cleaning: Keep the fingerprint sensor and keypad clean and dry. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
- Smooth Operation: Periodically check that all rotating components of the lock operate smoothly. If you notice any stiffness, consult the troubleshooting section or contact support.
- Mechanical Key: Ensure your mechanical backup key is stored in a safe, accessible location outside the property.
Troubleshooting
- Problem: Fingerprint sensor is not recognizing registered fingerprints or accepts any finger.
- Solution: This indicates an issue with fingerprint enrollment or initialization. Ensure you are following the enrollment steps precisely, capturing five distinct points of your finger. If the issue persists after multiple attempts and resets, perform a factory reset (if available) and re-enroll fingerprints. Ensure your fingers are clean and dry during enrollment and use.
- Problem: IC card or password registration is not working.
- Solution: Verify that you are following the correct procedure in the app for IC card and password enrollment. Ensure the IC card is held steadily over the sensor during registration. For passwords, confirm the correct length and format. If issues persist, try restarting the app and the lock (by temporarily removing batteries) and attempt registration again.
- Problem: Lock does not initialize correctly after a reset (e.g., 5 beeps but no change).
- Solution: Ensure the reset pin is held for the correct duration and that the lock completes the reset sequence. If the lock does not respond as expected, check battery levels and replace if necessary. A full factory reset might be required if the issue is persistent.
- Problem: Internal wiring is not long enough during installation.
- Solution: This can be a manufacturing variation. Carefully check if the wires can be gently stretched or rerouted without damage. If the wires are genuinely too short to make a connection, contact customer support for assistance or a replacement part.
- Problem: Remote unlocking via app is not working.
- Solution: Remote unlocking requires a Bluetooth gateway. Ensure you have a compatible gateway connected to your home network and properly paired with your smart lock. Check the gateway's status and internet connection. Verify that Bluetooth is enabled on your phone and the lock is within range of the gateway.
User Tips
- Gateway for Remote Access: For full smart home integration and remote control, consider purchasing a Bluetooth or multi-mode gateway. This will unlock the full potential of app-based remote unlocking and smart automation features.
- Door Compatibility: Always double-check your door's thickness and lock compatibility before purchasing and installing to ensure a smooth setup process.
- Battery Quality: Invest in high-quality alkaline batteries to ensure reliable performance and avoid frequent replacements.
- Mechanical Key Backup: Always keep your physical keys in a safe, accessible location outside your home as a backup.
- Regular Maintenance: Keep the lock clean and ensure moving parts operate smoothly for long-term reliability.
Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF here.
If you encounter any issues or have suggestions during use, you can also contact support directly through the app:
- Tap the Settings button in the top-right corner of the app.
- Select "Help Center".
- Tap "Feedback".
- Select the issue type and category that best describes your situation.
- Describe the issue in detail and attach up to three images or videos for clarity.
Image: Guide on how to use the in-app feedback feature for support.