RiccoDi DJ7023-1.2-21

Contents

RiccoDi 2-Pin Automotive Headlight Wiring Harness Connector User Manual

Model: DJ7023-1.2-21

1. Introduction

This manual provides instructions for the safe and effective use of the RiccoDi 2-Pin Automotive Headlight Wiring Harness Connector, Model DJ7023-1.2-21. This product is designed for automotive applications, ensuring fast, stable, waterproof, and dustproof electrical connections.

RiccoDi 2-Pin Automotive Headlight Wiring Harness Connectors (male and female)
Figure 1: RiccoDi 2-Pin Automotive Headlight Wiring Harness Connectors (male and female).

2. Warnings

  • CAUTION: Do not use in humid environments.
  • WARNING: Never insert or remove connectors under power. Ensure all power sources are disconnected before handling.

3. Features

  • Fast and stable connection
  • Waterproof and dustproof design
  • Compatible with multiple interface types

4. Setup and Installation

Before installation, ensure you have the correct male and female connectors, terminals, and seals for your application. Refer to the package contents for included items.

Components of the connector set, including male and female housings, terminals, and seals.
Figure 2: Example of connector set components (housings, terminals, seals).

4.1. Assembly Instructions

  1. Prepare your wiring by stripping the insulation to the appropriate length for the terminals.
  2. Crimp the terminals onto the prepared wires securely. Ensure a good mechanical and electrical connection.
  3. Insert the crimped terminals into the corresponding connector housing. Ensure they click into place, indicating a secure lock.
  4. If applicable, install the rubber seals onto the wires before inserting terminals into the housing to ensure waterproof and dustproof integrity.
Video 1: Demonstration of inserting a terminal into a connector housing.

5. Operating Instructions

  1. Align the male and female connectors carefully.
  2. Insert the male connector into the female port until you hear or feel a click, confirming a secure connection.
  3. Power on the system only after confirming a secure connection.
  4. To disconnect, ensure the power is off. Then, press any release tabs (if present) and gently pull the connectors apart.

6. Maintenance

  • Regularly inspect connectors for any signs of wear, corrosion, or damage.
  • Keep the connector interfaces clean and free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning.
  • Ensure proper strain relief for connected wires to prevent damage to the terminals or housing.

7. Troubleshooting (FAQs)

Q: Poor contact?
A: Check whether the interface is clean. Ensure terminals are properly crimped and fully inserted into the housing.
Q: Failure to connect?
A: Verify that the power supply is turned on (after ensuring a secure connection). Check for proper alignment and ensure no pins are bent or damaged.
Q: Abnormal heating?
A: Immediately discontinue use and inspect the wiring for shorts, improper crimps, or overloading. Consult a qualified technician if necessary.

8. Specifications

Attribute Value
Brand Name RiccoDi
Model Number DJ7023-1.2-21
Series 1.2mm Plug Connector
Position 2Pin
Connector Type Female (also available in Male)
Application Automotive
Material PA66
Origin Mainland China
Certification CE
EU LVD Voltage Low voltage: Below 50Vac or 75Vdc
High-concerned chemical None
Package Dimensions (L x W x H) 15 cm x 15 cm x 10 cm
Package Weight 0.12 kg

9. User Tips

  • Always double-check the polarity before making final connections to avoid damage to components.
  • Use appropriate crimping tools for terminals to ensure a reliable and durable connection.
  • When working with automotive wiring, consider using heat shrink tubing over crimped terminals for added insulation and protection against environmental factors.

10. Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.