1. Product Overview
The Erilles 300M WiFi Extender is a high-performance wireless signal booster designed to expand the coverage of your existing WiFi network. It supports IEEE 802.11b/g/n standards, delivering a maximum wireless transmission rate of 300Mbps, which ensures stable and high-speed internet access for your smartphones, tablets, laptops, smart TVs, and other wireless devices. This extender effectively eliminates WiFi dead zones in your home, office, or any other space, providing seamless connectivity throughout the area.
Key Features:
- Supports 802.11b/g/n wireless standards, 300Mbps maximum transmission rate
- Easy plug-and-play installation, no complicated configuration required
- Signal strength indicator lights for easy status monitoring
- Compatible with all mainstream WiFi routers on the market
- Compact and portable design, saving space and easy to place
- WPA/WPA2 wireless security encryption, protecting your network from unauthorized access



2. Package Contents
Please check whether all the following items are included in the package before use. If any item is missing or damaged, please contact the seller immediately.
- 1 x 300M WiFi Extender
- 1 x Quick Installation Guide
- 1 x Power Adapter (Input: 100-240V AC, 50/60Hz; Output: 5V/1A)
3. Installation and Setup
3.1 Preparation
- Ensure your existing WiFi router is working normally and can provide a stable wireless signal.
- Place the WiFi extender in a location that is within the signal coverage of your router and close to the area where you need to expand the WiFi signal (it is recommended to place it halfway between the router and the WiFi dead zone for the best signal effect).
- Plug the power adapter into the extender and connect it to a power outlet. The power indicator light will turn on, indicating that the extender is powered on successfully.
3.2 Connection and Configuration
There are two ways to configure the WiFi extender: WPS One-Click Configuration and Manual Configuration. You can choose the appropriate method according to your needs.
3.2.1 WPS One-Click Configuration (Recommended)
- Press the WPS button on your existing WiFi router, and within 2 minutes, press the WPS button on the WiFi extender (hold for 2-3 seconds until the WPS indicator light starts flashing).
- Wait for 3-5 minutes. When the WPS indicator light stops flashing and stays on, it means the extender has successfully connected to the router. The signal indicator light will show the strength of the connected signal (green for strong, yellow for medium, red for weak).

3.2.2 Manual Configuration
- Turn on the wireless function of your smartphone, tablet, or laptop, and search for the wireless network named "WiFi-Extender-XXXX" (XXXX is the last four digits of the extender's MAC address, which can be found on the label at the bottom of the extender).
- Connect to this network (no password is required for the first connection).
- Open a browser on your device, enter "192.168.1.1" (the default IP address of the extender) in the address bar, and press Enter.
- Enter the default username and password (both are "admin") to log in to the extender's management interface.
- In the management interface, select "Repeater Mode", then search for your existing WiFi router's network name (SSID).
- Select your router's network, enter the correct WiFi password of the router, and click "Save".
- Wait for the extender to restart (about 1-2 minutes). After restarting, the extender will automatically connect to the router, and the signal indicator light will show the signal strength.

4. Operating Instructions
- After successful configuration, the WiFi extender will automatically forward the wireless signal of your router. You can connect your wireless devices to the extender's network (the network name and password are the same as your router's network by default; you can modify the network name and password in the management interface if needed).
- The indicator lights on the extender can help you monitor its working status:
- Power Indicator: Red (power on), Off (power off). If the power indicator is off, check whether the power adapter is connected properly.
- WPS Indicator: Flashing (WPS connection in progress), Steady On (WPS connection successful), Off (WPS not activated).
- Signal Indicator: Green (strong signal), Yellow (medium signal), Red (weak signal), Flashing (connecting to router). If the signal is weak, move the extender closer to the router.
- To modify the extender's settings (such as network name, password, working mode), you can log in to the management interface again by following the steps in Section 3.2.2.

5. Maintenance
To ensure the longevity and optimal performance of your WiFi Repeater, please observe the following:
- Environmental Conditions: Do not place the extender in a humid, high-temperature, or dusty environment (such as a bathroom, kitchen, or near a heater), to avoid damage to the device.
- No Disassembly: Do not disassemble, repair, or modify the extender by yourself, as this may cause safety hazards or damage the device.
- Power Adapter: Use only the original power adapter provided in the package. Using other power adapters may cause short circuits or device damage.
- Child Safety: Keep the extender away from children to avoid electric shock or other accidents.
- Power Off When Not in Use: Unplug the power adapter when the extender is not in use for a long time to save energy and protect the device.
6. Troubleshooting
If you encounter problems during use, please refer to the following troubleshooting methods. If the problem cannot be solved, please contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power indicator light | Power adapter not connected properly or power outlet faulty | Reconnect the power adapter, check the power outlet, or replace the power adapter |
| Cannot connect to the extender's network | Extender not powered on or placed too far from the device | Ensure the extender is powered on, move the device closer to the extender |
| Extender cannot connect to the router | Router WPS function not activated, or wrong WiFi password | Reactivate the router's WPS function, or re-enter the correct WiFi password in the management interface |
| Slow internet speed after connection | Weak signal between extender and router, or too many connected devices | Move the extender closer to the router, reduce the number of connected devices |
| Cannot log in to the management interface | Wrong IP address or device not connected to the extender's network | Ensure the device is connected to the extender's network, re-enter the correct IP address (192.168.1.1) |
7. Technical Specifications
| Item | Specification |
|---|---|
| Wireless Standard | IEEE 802.11b/g/n |
| Transmission Rate | Up to 300Mbps |
| Working Frequency | 2.4GHz |
| Working Mode | Repeater Mode, AP Mode (optional) |
| Power Supply | Input: 100-240V AC, 50/60Hz; Output: 5V/1A |
| Working Temperature | 0°C - 40°C |
| Storage Temperature | -20°C - 60°C |
| Humidity | 10% - 90% (non-condensing) |

8. User Tips
Based on common user experiences with WiFi repeaters, here are some tips for optimal performance:
- Optimal Placement: Experiment with placing the repeater at different locations between your main router and the dead zone. A good rule of thumb is to place it where you still get 2-3 bars of signal from your main router.
- Avoid Obstructions: Walls, large metal objects, and appliances can interfere with WiFi signals. Try to place the repeater in an open area with a clear line of sight to both your router and the devices you want to connect.
- Regular Reboots: If you notice a drop in performance, try power cycling the repeater (unplug it for 10 seconds and plug it back in). This can often resolve minor connectivity issues.
- Security: Always ensure your repeater is using WPA2 encryption to protect your network from unauthorized access.
9. Warranty and Support
Warranty Information
This 300M WiFi Extender comes with a 12-month warranty from the date of purchase. During the warranty period, if the device has any quality problems (excluding damage caused by man-made factors, improper use, or natural disasters), we will provide free repair or replacement services.
Customer Support
For after-sales service, please contact our customer service via: [Customer Service Email/Phone Number - Please refer to your purchase documentation for specific contact details].
Note: The specifications and functions of the product are subject to change without prior notice. Please refer to the actual product for details.
A detailed user manual is also available in PDF format for download: 300M WiFi Extender User Manual (PDF)