1. Introduction
The ipega PG-9777S is a versatile Bluetooth gamepad designed to enhance your gaming experience across multiple platforms. Featuring vibrant RGB lighting, linear vibration feedback, and Hall Effect joysticks for precise control, this stretchable controller is compatible with Nintendo Switch, Android, iOS (version 13.0 and above), iPad, PC, and PS3. Its ergonomic design and telescopic handle accommodate a wide range of devices, providing comfort and flexibility during gameplay.
For detailed instructions and further support, please refer to the official user manual PDF: PG-9777S User Manual (PDF).
2. Setup
2.1. Package Contents
- ipega PG-9777S Bluetooth Gamepad
- USB-C Charging Cable
- User Manual (this document and PDF)
2.2. Charging the Controller
Before first use, fully charge the controller. Connect the supplied USB-C charging cable to the charging port on the controller and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will typically show charging status and turn off or change color when fully charged.
2.3. Connecting to Devices
The PG-9777S supports various connection modes. Ensure the controller is sufficiently charged before attempting to connect.
- Nintendo Switch:
- On your Switch, go to "System Settings" > "Controllers and Sensors" > "Disconnect Controllers" (to clear previous connections, if any).
- Then, go to "Change Grip/Order".
- Press and hold the specific pairing button combination on the PG-9777S (refer to the PDF manual for exact combination, usually HOME + Y or HOME + R).
- The indicator lights on the controller will flash, indicating it's in pairing mode.
- Once recognized by the Switch, select it to connect.
- Android Devices (Phones/Tablets):
- Enable Bluetooth on your Android device.
- Press and hold the specific pairing button combination on the PG-9777S (usually HOME + A).
- The indicator lights will flash.
- On your Android device, search for new Bluetooth devices and select "PG-9777S" or similar from the list.
- Once paired, the indicator light on the controller will become solid.
- iOS Devices (iPhone/iPad, iOS 13.0+):
- Enable Bluetooth on your iOS device.
- Press and hold the specific pairing button combination on the PG-9777S (usually HOME + B).
- The indicator lights will flash.
- On your iOS device, search for new Bluetooth devices and select "PG-9777S" or similar from the list.
- Once paired, the indicator light on the controller will become solid.
- PC (Windows):
- Ensure your PC has Bluetooth enabled.
- Go to "Settings" > "Devices" > "Bluetooth & other devices" > "Add Bluetooth or other device".
- Press and hold the specific pairing button combination on the PG-9777S (usually HOME + X).
- The indicator lights will flash.
- Select "Bluetooth" and choose "PG-9777S" or similar from the list of available devices.
- Follow any on-screen prompts to complete pairing.
3. Operating the Controller
3.1. Button Layout and Functions
The PG-9777S features standard gamepad controls:
- Left Side: Left Analog Stick, D-Pad, SELECT, CLEAR, TURBO buttons.
- Right Side: Right Analog Stick, A/B/X/Y Action Buttons, START, HOME, LIGHT buttons.
- Shoulder Buttons: L1/L2 (or LB/LT), R1/R2 (or RB/RT) (not explicitly visible in all images, but standard).
3.2. RGB Lighting Effects
The controller features dynamic RGB lighting. Use the LIGHT button to cycle through different lighting modes, colors, or to turn the lighting off. Press and hold the LIGHT button for specific functions as detailed in the PDF manual.
3.3. Turbo Function
The TURBO function allows for rapid, repeated input of a button press. To set a TURBO function:
- Press and hold the button you wish to assign TURBO to (e.g., A button).
- While holding the action button, press the TURBO button once. The TURBO function is now active for that button.
To clear a TURBO function:
- Press and hold the button with the active TURBO function.
- While holding the action button, press the CLEAR button once. The TURBO function is now deactivated for that button.
3.4. Telescopic Handle Adjustment
The PG-9777S features an adjustable telescopic handle to securely hold various smartphones and tablets. Gently pull the sides of the controller outwards to extend the handle. It supports devices with a length between 162mm and 286mm. Carefully place your device into the central slot and allow the handle to retract slightly to grip it firmly.
4. Maintenance
4.1. Cleaning
- Wipe the controller with a soft, dry cloth.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Ensure no liquid enters the controller's openings.
- Do not use strong chemicals, solvents, or abrasive cleaners.
4.2. Storage
- Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the controller.
4.3. Battery Care
- To prolong battery life, avoid fully discharging the controller frequently.
- If storing for an extended period, charge the controller to about 50% before storage and recharge every few months.
5. Troubleshooting
5.1. Controller Does Not Turn On
- Ensure the controller is fully charged. Connect it to a power source and wait for a few minutes before trying to turn it on again.
- Try a different USB-C cable and power adapter.
5.2. Cannot Connect via Bluetooth
- Ensure the controller is in the correct pairing mode for your device (refer to Section 2.3).
- Make sure Bluetooth is enabled on your device.
- Forget/remove any previous "PG-9777S" connections from your device's Bluetooth settings and try pairing again.
- Restart both your device and the controller.
- Ensure the controller is within the effective Bluetooth range (typically 10 meters/33 feet).
- Check for any interference from other wireless devices.
5.3. Buttons or Joysticks Not Responding
- Ensure the controller is properly connected to your device.
- Test the controller in a different game or application to rule out game-specific issues.
- Restart the controller and your device.
- If possible, try updating the controller's firmware (check the official ipega website or PDF manual for instructions).
5.4. Controller Lag or Disconnections
- Ensure the controller is fully charged. Low battery can affect performance.
- Reduce the distance between the controller and your device.
- Minimize interference from other wireless devices (Wi-Fi routers, other Bluetooth devices).
- Ensure your device's operating system and game are up to date.
5.5. Resetting the Controller
If the controller becomes unresponsive or exhibits unusual behavior, a reset may resolve the issue. Look for a small reset button (often a pinhole) on the back or bottom of the controller. Use a thin tool (like a paperclip) to press and hold the reset button for a few seconds. Then, try turning on and reconnecting the controller.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | PG-9777S |
| Brand Name | ipega |
| Interface Type | Bluetooth |
| Compatible Platforms | Nintendo Switch, Android, iOS (13.0+), iPad, PC, PS3, Smart TV |
| Battery Included | Yes |
| Telescopic Range | 162mm - 286mm |
| Joysticks | Hall Effect, Wear-resistant |
| Vibration | Linear Vibration |
| Lighting | RGB Light Effect |
| Certifications | CE, RoHS |
| Origin | Mainland China |
| Approx. Package Weight | 0.5 kg |
| Approx. Package Dimensions | 15 cm (L) x 15 cm (W) x 3 cm (H) |
7. User Tips
- Game Compatibility: Not all games natively support external controllers. Check the game's settings or description for controller support. Some games may require third-party key-mapping software (especially on Android/iOS) if they don't have native controller support.
- Firmware Updates: Periodically check the official ipega website for any available firmware updates for your controller. Updates can improve performance, add features, or fix bugs.
- Battery Management: For optimal battery life, avoid leaving the controller fully discharged for long periods. Charge it regularly, even if not in frequent use.
- Ergonomics: Adjust the telescopic handle to ensure your device is centered and balanced for comfortable long gaming sessions.
8. Warranty and Support
The ipega PG-9777S Bluetooth Gamepad comes with a manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. For technical support, troubleshooting beyond this manual, or warranty claims, please contact the seller or ipega customer service directly.
Always keep your proof of purchase for warranty purposes.