1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your WRWD Wireless CarPlay Android AUTO Module. This module is designed to upgrade your BMW's original screen to support Apple CarPlay and Android Auto functionalities, enhancing your driving experience with smart features.
Key Features:
- Wireless WiFi & Bluetooth connectivity
- Seamless integration with original car systems
- Advanced chip for stable performance
- USB port for plug-and-play functionality

Image: Overview of the CarPlay Module's key features.
2. Package Contents
Please verify that all the following components are included in your package:
- CarPlay Module (Main Unit)
- Power Cable
- LVDS Cable
- Wi-Fi Antenna
- CarPlay Main Cable

Image: Product information and included cables.
3. Compatibility
This Wireless CarPlay Android AUTO Module is compatible with BMW NBT/CIC systems found in various models, including:
- BMW 1, 2, 3, 4, 5, 6, 7 Series
- BMW X1, X3, X4, X5, X6
- MINI
- Specific chassis codes: E60, E84, E70, F26, F25, F10, F11, F20, F21
Important Note:
Before installation, please ensure your car's system is either NBT or CIC. This module is NOT compatible with EVO ID5/ID6 or CCC systems. If you are unsure about your vehicle's system, please consult a professional or contact WRWD support for assistance.

Image: Visual guide for identifying compatible and incompatible BMW systems.
4. Setup and Installation
4.1. Pre-installation Checks
- Compatibility Confirmation: Ensure your vehicle's system is compatible (NBT/CIC) by contacting WRWD or verifying your car's specifications.
- Vehicle Functionality: Confirm all original vehicle functions (screen operation, sound, Bluetooth, buttons/controls) are working correctly.
- Warning Lights: Address any existing warning lights (e.g., airbag, TPMS) before proceeding with installation.
- Monitor Operation: Verify that the car's monitor is fully operational.
4.2. Safety Warning
CAUTION: Never turn on the ignition with the factory radio removed. Disconnect the vehicle's battery if necessary before starting installation.
4.3. Module Placement
After disassembling the necessary panels, determine a suitable location for the CarPlay module. Consider the length of the CarPlay cables. Common locations include behind the monitor, behind or under the Factory Radio Headunit, or under/above the glovebox.
- Bluetooth Antenna: The Bluetooth antenna is located within the module. Ensure its signal won't be interrupted by heavy metals or plastics.
- Ventilation: The module can overheat if there is improper ventilation. Ensure it is not in close proximity to other high-temperature components or environments.
4.4. DIP Switch Configuration
CAUTION: Ensure the CarPlay module's power is disconnected when adjusting the DIP switches. Once the DIP switches are set, then connect the CarPlay module's power.
Adjust the DIP switches according to your vehicle model and screen size. Refer to the table below:
| DIP 1 | DIP 2 | Car Model |
|---|---|---|
| OFF | OFF | Default |
| DIP 3 | DIP 4 | Screen Size |
| OFF | OFF | 800*480 (6.5") |
| OFF | ON | 1280*480 (8.8"/10.25") |
It is important to check the DIP switch settings before installation.
4.5. Cable Connection Guide
For a visual guide on the installation process, please watch the official installation video:
Video: Step-by-step guide for CarPlay module installation and connection.
Follow these steps for cable connections:
- CarPlay LVDS Cable: Plug the CarPlay LVDS Cable into the original vehicle screen. Then, connect it to the Factory Radio Headunit LVDS Connector (typically a red connector). If not connected properly, the screen may not appear.
- CarPlay Main Cable: Connect the CarPlay Main Cable with the Factory Radio main cable. Then, connect it to the back of the Factory Radio Headunit. If not connected correctly, the audio may not work properly.
- CarPlay USB Cable: Pass the CarPlay USB Cable through to the bottom of the Factory radio lower gear shift box. If not connected correctly, wired CarPlay may not operate properly.
- WiFi Antenna: Peel the adhesive from the Wi-Fi Antenna and stick it to a non-metal area inside the dashboard. Confirm it is plugged into the ANT port on the CarPlay module.
- Connect to CarPlay Module: Connect the LVDS-OUT, LVDS-IN, ANT, and POWER cables to their respective ports on the CarPlay Module.

Image: Diagram of the CarPlay module connections.
5. Operating Instructions
5.1. Post-Installation Test Warning
CAUTION: Never turn on the ignition with the Head Unit removed.
5.2. Switching Between CarPlay and Factory Display
To switch between the original car interface and the CarPlay/Android Auto interface, long press the 'BACK' button on your vehicle's center console.

Image: Location of the 'BACK' button for switching displays.
5.3. Connecting Your Phone
Wired Connection (Apple CarPlay & Android Auto)
Connect your phone using an original USB cable to the CarPlay module's USB port.
Wireless Apple CarPlay
- First, connect your iPhone with a USB cable.
- Your iPhone will prompt you to "Enable Wireless CarPlay?". Select 'Yes'.
- Leave the phone connected for 3 to 4 minutes.
- Disconnect the USB cable. Wireless CarPlay should now connect automatically.
Wireless Android Auto
- On your car's screen, navigate to Settings > Wireless Android Auto Settings > Pairing.
- On your phone, open Bluetooth settings and search for the device name displayed on the car screen (e.g., CX_BTB3FD4A0279D5).
- Pair your phone with the device. Android Auto will now connect wirelessly.
Ensure both Bluetooth and Wi-Fi are enabled on your phone for wireless connections.
5.4. Audio Settings
For audio output, select the "AUX front row" as the factory audio source in your BMW's original menu.
In the CarPlay module's settings, ensure "Use the original Bluetooth Audio" is set to ON (Settings > Audio Settings > Use the original Bluetooth Audio).

Image: CarPlay Audio Settings interface.
5.5. Voice Assistant
The module supports voice assistants like Siri (for Apple CarPlay) and Google Assistant (for Android Auto). You can activate them by saying "Hey, Siri" or by long-pressing the voice recognition button on your iPhone. For Android Auto, push the controller knob to the right and wait for Google Assistant.

Image: Voice Assistant functionality for hands-free control.
5.6. Camera Support
The module supports rear view video input (CVBS signal input). To configure camera settings, go to Advanced Features in the CarPlay settings. Here you can enable Parking Guideline, Park Distance Control, and select between Aftermarket Camera or Original Camera.

Image: Rear view camera display through the CarPlay module.
6. Maintenance
- Keep the module and connections clean and free from dust and debris.
- Ensure the module is installed in a well-ventilated area to prevent overheating.
- Avoid exposing the module to extreme temperatures or moisture.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Screen does not appear after installation | Check if the CarPlay LVDS Cable is connected properly to both the original vehicle screen and the Factory Radio Headunit LVDS Connector. Verify DIP switch settings. |
| No audio output | Ensure the CarPlay Main Cable is correctly connected to the Factory Radio main cable and the Headunit. Verify that "AUX front row" is selected as the audio source in your BMW's original menu and "Use the original Bluetooth Audio" is ON in CarPlay settings. Try increasing your phone's media volume. |
| Wired CarPlay/Android Auto not working | Check if the CarPlay USB Cable is correctly routed and connected. Ensure you are using an original USB cable. |
| Factory Bluetooth calls not working | Check that "Use the original Bluetooth Audio" is ON in the CarPlay settings. |
| Siri voice guidance volume is low | Press the voice recognition button on your iPhone, then press the volume up button on your phone to adjust. |
| Module overheating | Ensure the module is installed in a well-ventilated area, away from high-temperature components. |
| Bluetooth antenna signal issues | Ensure the Wi-Fi antenna is not obstructed by heavy metals or plastics and is stuck to a non-metal area. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 135mm x 78mm x 22mm |
| Package Dimensions (L x W x H) | 25cm x 19cm x 8cm |
| Package Weight | 0.8 kg |
| Phone OS Compatibility | iOS & Android |
| High-concerned chemical | None |
| Origin | Mainland China |
9. User Tips
- Verify Compatibility: Always double-check your BMW's system (NBT or CIC) before purchasing and installing to ensure proper fitment.
- Follow Video Instructions: The provided installation video offers a clear visual guide. It is highly recommended to follow it step-by-step, especially if the written manual seems unclear.
- Original Microphone: The module is designed to utilize your car's original microphone for calls and voice commands, ensuring seamless integration.
10. Warranty
WRWD offers a one-year warranty from the date of purchase on the invoice. This warranty covers product defects from the factory.
The warranty does NOT cover:
- Damage caused by natural disaster.
- Damage resulting from improper installation work.
- Damage due to mishandling or improper use.
Any warranty claims made after the one-year mark will be denied.
11. Support
For technical support, inquiries, or assistance, please contact us via email:
E-mail: renwoda2022@163.com