Logitech G PRO X Superlight 2 SE Wireless Gaming Mouse User Manual

Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your Logitech G PRO X Superlight 2 SE wireless gaming mouse. While the detailed diagrams focus on the G PRO X Superlight 2 SE, general principles apply to Logitech M280 and M170 wireless mice. Please read this manual thoroughly before using your device.

Package Contents

Ensure all items are present in your package:

• 1 x Mouse
• 1 x Optional grip tape
• 1 x Receiver (installed in extension adapter)
• 1 x USB charging and data cable
• 1 x Surface preparation cloth
• 1 x Optional POWERPLAY aperture door with PTFE foot

Mouse Features

Familiarize yourself with the various buttons and ports on your mouse:

1. Left Click
2. Right Click
3. Middle Click/Scroll Wheel
4. Browser Forward Button
5. Browser Back Button
6. Power LED Indicator
7. USB Charging/Data Port
8. Power On/Off Switch
9. POWERPLAY Aperture Door

Setup

1. Connect the Receiver: Plug the USB charging/data cable into your PC. Then, plug the extension adapter and the receiver into the charging/data cable.

   

2. Turn on the Mouse: Locate the power on/off switch on the bottom of the mouse and slide it to the 'ON' position.

   

3. Install G HUB Software (Optional but Recommended): To configure advanced mouse settings such as DPI (Dots Per Inch) or report rate, download the G HUB software from logitechG.com/GHUB. This software allows for customization and optimization of your mouse's performance.

   

4. Optimal Wireless Performance: For the best wireless performance, ensure the mouse is used within 20cm of the receiver. Additionally, keep the receiver and mouse greater than 2 meters away from sources of 2.4GHz interference, such as Wi-Fi routers.

   

Operating Instructions

Installing Optional Grip Tape

To enhance grip and comfort, you can install the included optional grip tape:

1. First, clean the surface of the mouse with the provided surface preparation cloth to remove any oil or dust.
2. Then, carefully align and apply the grip tape to the desired mouse surfaces.

Storing the USB Receiver

The USB receiver can be conveniently stored inside the mouse to prevent loss, especially when using the mouse with the Logitech G POWERPLAY wireless charging system.

1. Remove the POWERPLAY aperture door from the bottom of the mouse.
2. Insert the USB receiver into the designated storage slot.
3. You may also install the included optional aperture door with a PTFE foot instead of the default door for different glide characteristics.

Specifications

Maintenance

To ensure the longevity and optimal performance of your mouse, follow these maintenance guidelines:

• Cleaning: Use a soft, lint-free cloth to wipe the mouse surface. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals or abrasive materials.
• Sensor Cleaning: Periodically clean the optical sensor on the bottom of the mouse with a dry cotton swab to prevent tracking issues.
• Battery Care: If your mouse uses replaceable batteries, ensure they are inserted correctly. For rechargeable models, avoid overcharging and store the mouse in a cool, dry place when not in use for extended periods.
• Storage: When transporting or storing the mouse, consider using a protective case to prevent scratches or damage. Utilize the internal receiver storage slot to prevent losing the USB receiver.

Troubleshooting

If you encounter issues with your mouse, try the following solutions:

• Mouse Not Responding:
  • Ensure the mouse is turned on.
  • Check battery levels and replace or recharge if necessary.
  • Verify the USB receiver is securely plugged into the PC and the extension adapter (if used).
  • Try plugging the receiver into a different USB port on your PC.
  • Ensure the mouse is within range of the receiver (within 20cm).
• Intermittent Connectivity/Lag:
  • Move the mouse and receiver away from other 2.4GHz wireless devices (e.g., Wi-Fi routers, cordless phones) by at least 2 meters.
  • Ensure there are no large metal objects between the mouse and the receiver that could block the signal.
• Tracking Issues:
  • Clean the optical sensor on the bottom of the mouse.
  • Try using the mouse on a different surface or a mouse pad.
• G HUB Software Not Detecting Mouse:
  • Ensure the mouse is connected and turned on.
  • Restart the G HUB software.
  • Reinstall the G HUB software if the issue persists.
  • Check for any available firmware updates for the mouse via G HUB.

User Tips

• Customization: Utilize the Logitech G HUB software to customize button assignments, DPI settings, and create profiles for different games or applications.
• Battery Life: To maximize battery life, remember to turn off the mouse when not in use for extended periods.
• Ergonomics: Position your mouse and keyboard comfortably to reduce strain during long usage sessions.

Support

For further assistance, detailed product information, or warranty inquiries, please refer to the official Logitech support resources.

A comprehensive user manual in PDF format is available for download: Logitech G PRO X Superlight 2 SE User Manual (PDF).

You can also visit the official Logitech support website for FAQs and contact information.