1. Introduction
Thank you for choosing Herdio Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your 6.5-inch marine speakers. These speakers are designed for marine environments, featuring IP66 waterproofing, UV resistance, and corrosion resistance, along with integrated blue LED lighting for enhanced ambiance.



2. Safety Information (FCC Requirement)
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
3. What's in the Box
Please check the package contents to ensure all items are present:
- Marine Waterproof Speaker *2
- Instruction Manual *1
- Speaker Cables *2
- LED Light Cables *2

4. Setup and Installation
4.1 Speaker Dimensions
Refer to the table and diagram below for the precise dimensions required for installation:
| Model No. | Dimensions (D, d, H, h) |
|---|---|
| HMS-5027 | D166, d123, H83, h57 mm |
| HMS-6027 | D192, d142, H98, h65 mm |
| HMS-8027 | D232, d184, H124, h89 mm |

4.2 Installation Steps
- Prepare the Mounting Surface: Cut the drywall or mounting surface according to the speaker template. Ensure you allow at least 2mm between a wall stud (or any structural element) and the speaker cutout.
- Connect LED Wire: Connect the blue LED wire from the speaker to a 12V power supply. This will power the speaker's LED lights.
- Connect Speaker Wires: Connect the audio speaker wires to the speaker terminals. Ensure correct polarity (red to positive, black to negative) for optimal sound.
- Secure the Speaker: Insert the speaker into the cutout. Screw down each of the four Phillips head screws to secure the speaker firmly in place.
- Adjust Angle: Adjust the installing angle of the speaker as needed for optimal sound dispersion.




5. Operating Instructions (Bluetooth Connectivity)
(ONLY FOR BLUETOOTH VERSION: HMS-5027BT, HMS-6027BT, HMS-8027BT)
- Ensure the Bluetooth Marine Speaker system is properly connected to a power source, and speaker wires are connected correctly.
- Power ON the speaker system. You will hear a tone indicating the Bluetooth system is ready for pairing.
- Then, go to your smart device's Bluetooth Network Settings. The Bluetooth Network Name will appear as 'HMS-xxx' on your device list (e.g., 'HMS-6027BT'). Click to connect. No password is required to connect, but if prompted, enter '0000' (four zeroes).
- You will hear another indication tone when a successful Bluetooth connection is established. You are now ready to enjoy music.
6. Specifications
Below are the detailed specifications for the Herdio Marine Speakers:
| Feature | HMS-5027/HMS-5027BT | HMS-6027/HMS-6027BT | HMS-8027/HMS-8027BT |
|---|---|---|---|
| Power Output | 2x 40W RMS Power, 2x 150W Max Power | 2x 50W RMS Power, 2x 200W Max Power | 2x 60W RMS Power, 2x 250W Max Power |
| LED Power | DC 12V | DC 12V | DC 12V |
| Woofer | Injection cone with rubber edge | ||
| Color | White/Black | ||
| Dimensions | D166, d123, H83, h57 mm | D192, d142, H98, h65 mm | D232, d184, H124, h89 mm |
| Magnet | 8 Oz | 10 Oz | 20 Oz |
| Frequency Response | 80 Hz - 18 KHz | 60 Hz - 18 KHz | 40 Hz - 18 KHz |
| Impedance | 4 Ohms | ||
| Sensitivity | 90 dB | 90 dB | 91 dB |

7. Troubleshooting
If you encounter any issues with your Herdio Marine Speakers, refer to the table below for common problems and solutions:
| Problem | Cause | Action |
|---|---|---|
| Has power but no sound | Wrong positive and negative connection. | Make sure the speaker red (+) connects to amplifier red (+) and the black (-) to the black (-). |
| Speaker wiring might be loose. | Check if the speaker wiring is tightly wired or not. | |
| Has power but no light | The connection point between the power supply and the lamp wire is not fastened tightly. | Ensure the connection point between the power cord and the lamp wire is securely fastened. |
8. Maintenance
Your Herdio Marine Speakers are designed for durability in harsh environments, featuring UV resistant grilles and corrosion-resistant materials. To ensure longevity and optimal performance:
- Cleaning: Regularly clean the speakers with a soft, damp cloth to remove salt, dirt, and debris. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
- Protection: While the speakers are waterproof and UV resistant, prolonged exposure to extreme conditions can still affect their lifespan. Consider using covers when the boat or vehicle is stored for extended periods.
9. Warranty and Support
All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions, feel free to send your messages to our mailbox: support@herdiotech.com
For more information, visit: www.Herdiotech.com