Introduction
Thank you for choosing Herdio Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new speakers. Please read it thoroughly before use to ensure optimal performance and longevity of your product.
These 5.25-inch marine speakers are designed for use in boats, ATVs, and other outdoor environments, featuring IP66 waterproof rating, UV resistance, and corrosion resistance. They include built-in blue LED lights for enhanced aesthetics.
Figure 1: Herdio 5.25 Inch Marine Speakers (White)
Product Features
- IP66 Waterproof Rating: Designed to withstand marine environments.
- UV Resistant: Protected against sun exposure.
- Corrosion Resistant: Durable in harsh conditions.
- Built-in Blue LED Lights: Creates a cool night atmosphere.
- Coaxial Audio Design: Delivers clear sound.
- High Power Output: Up to 250W Max Power per speaker.
Figure 2: Durability features: Waterproof, UV Resistant, Corrosion Resistant.
Figure 3: Blue LED light feature in a marine setting.
Package Contents
Ensure all items are present in the box:
- Marine Waterproof Speaker * 2
- Instruction Manual * 1 (This document, also available as a PDF at Herdio User Manual PDF)
- Speaker Cables * 2
- LED Light Cables * 2
Figure 4: Contents included in the product package.
Specifications
The following table details the specifications for the Herdio Marine Speakers:
| Feature | HMS-5027 / HMS-5027BT (5.25 Inch) | HMS-6027 / HMS-6027BT (6.5 Inch) | HMS-8027 / HMS-8027BT (8 Inch) |
|---|---|---|---|
| Power Output (RMS) | 2x 40W | 2x 50W | 2x 60W |
| Max Power | 2x 150W | 2x 200W | 2x 250W |
| LED Power | DC 12V | DC 12V | DC 12V |
| Woofer | Injection cone with rubber edge | ||
| Color | White/Black | ||
| Dimensions (Outer Diameter) | D166mm / 6.53 inch | D192mm / 7.56 inch | D232mm / 9.13 inch |
| Dimensions (Cutout Diameter) | d123mm / 4.84 inch | d142mm / 5.59 inch | d184mm / 7.24 inch |
| Dimensions (Total Height) | H83mm / 3.26 inch | H98mm / 3.86 inch | H124mm / 4.88 inch |
| Dimensions (Mounting Depth) | h57mm / 2.24 inch | h65mm / 2.56 inch | h89mm / 3.50 inch |
| Magnet | 8 Oz | 10 Oz | 20 Oz |
| Frequency Response | 80 Hz - 18 KHz | 60 Hz - 18 KHz | 40 Hz - 18 KHz |
| Impedance | 4 Ohms | ||
| Sensitivity | 90 dB | 90 dB | 91 dB |
| Bluetooth (BT models only) | Yes (Bluetooth Version 5.1) | ||
| Audio Crossover | Full-Range | ||
| Number of Loudspeaker Enclosure | 2 | ||
| Input/Output | AUX | ||
| Maximum Wireless Range | 10m-20m | ||
Figure 5: Detailed dimensions and key specifications for the 5.25 inch speaker.
Installation Guide
Follow these steps for proper installation of your marine speakers:
- Prepare the Mounting Surface:
Cut the drywall or mounting surface. Always allow at least 2mm between a wall stud and the speaker cutout, or cut according to the provided template.
Figure 6: Template for cutting the mounting hole. (Refer to the physical template for exact dimensions).
- Connect LED Wires:
Connect the blue LED wire to a 12V DC power supply. Ensure correct polarity.
Figure 7: Connecting the LED wire to 12V power. (Ensure secure connections).
- Connect Speaker Wires:
Connect the speaker wires to the speaker terminals. Ensure the positive (+) and negative (-) connections match the amplifier's output.
Figure 8: Connecting speaker wires. (Match polarity for optimal sound).
- Mount the Speaker:
Insert the speaker into the cutout. Screw down each of the four Phillips head screws to secure the speaker.
Figure 9: Securing the speaker with screws.
- Adjust Installation Angle:
Adjust the installing angle of the speaker as needed for optimal sound direction.
Figure 10: Adjusting the speaker's angle.
Bluetooth Connectivity (For Bluetooth Versions Only)
If you have a Bluetooth-enabled model (e.g., HMS-5027BT), follow these steps to connect:
- Ensure the Bluetooth speaker system is properly connected to a power source and speaker wires are correctly connected.
- Power ON the speaker system. You should hear a tone indicating the Bluetooth system is ready for pairing.
- Go to your smart device's Bluetooth Network Settings. The Bluetooth Network Name will appear as 'HMS-xxx' on your device list.
- Click on 'HMS-xxx' to connect. No password is required to connect, but if prompted, enter '0000' (four zeroes).
- You will hear another indication tone when a successful Bluetooth connection is established. You are now ready to enjoy music.
FCC Requirement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Cause | Action |
|---|---|---|
| Has Power But No Sound | Wrong positive and negative connection. | Make sure the speaker red (+) connects to amplifier red (+) and the black (-) to the black (-). |
| Speaker wiring might be loose. | Check the speaker wiring is tightly wired or not. | |
| Has Power But No Light | The connection point between the power supply and the lamp wire is not fastened tightly. | The connection point between the power cord and the lamp wire needs to be fastened securely. |
User Tips
- The built-in blue LEDs are a great aesthetic feature, especially for night use on boats or ATVs.
- When connecting to an amplifier, ensure the amplifier's power output is sufficient for these speakers. Some users have noted that a 50W x 4 marine radio might not provide enough power for optimal performance. Consider amplifiers with higher power ratings if you desire more volume or clarity.
- Always double-check all wiring connections, especially for polarity and tightness, to prevent issues like no sound or no LED light.
Warranty & Support
All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. Proof of purchase must accompany all claims. During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions, feel free to send your messages to our mailbox: support@herdiotech.com.
For a downloadable PDF version of this manual, please visit: Herdio User Manual (PDF).
Contact Information
For more information and support, please visit our website: