CooSpo HW706

Contents

CooSpo HW706 Heart Rate Monitor Armband

User Manual

1. Product Introduction

The CooSpo HW706 is designed to capture real-time heart rate data using both Bluetooth and ANT+ technologies. This allows it to pair seamlessly with your favorite training applications, GPS watches, and bike computers. This user manual provides detailed instructions to help you effectively use and maintain your HW706 Heart Rate Monitor.

Note: This product is intended for sports purposes only and is not a substitute for any medical device.

CooSpo HW706 Heart Rate Monitor Armband, front view.

Figure 1: CooSpo HW706 Heart Rate Monitor Armband

Video: CooSpo HW706 Heart Rate Monitor Armband product demonstration, showcasing features and connectivity.

2. Important Safety Information

2.1. Disclaimer

  • The product described in this manual is subject to change without prior notice due to ongoing development.
  • Our company is not liable for any direct, indirect, incidental, consequential, or special damages, losses, costs, or expenses arising from the use of this material or the products described herein.

2.2. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Waste Electrical Products: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

2.3. General Product Warnings

  • Do not open or modify the product.
  • Do not disassemble or attempt to service this product.
  • This product is safe under normal and reasonably foreseeable operating conditions.
  • If the product is operating improperly, call COOSPO support.
  • Product must be returned to the manufacturer for any service or repair.

2.4. Battery Statement & Warnings

WARNING: INGESTION HAZARD

  • This product contains a button cell or coin battery.
  • DEATH or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
  • KEEP new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
  • Even used batteries may cause severe injury or death.
  • Call a local poison control center for treatment information.
  • Compatible battery type: CR2032.
  • Nominal battery voltage: 3V.
  • Do not force discharge, recharge, disassemble, heat above 45°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
  • Ensure the batteries are installed correctly according to polarity (+ and -).
  • Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
  • Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
  • Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.

3. Package Contents

Ensure all items are present in the package:

  • Heart Rate Monitor (HW706) x 1 (CR2032 battery installed)
  • Chest Strap x 1
  • User Manual x 1 (This document, or the PDF version)
Diagram showing the CooSpo Heart Rate Monitor, chest strap, and user manual.

Figure 2: Standard Accessories

4. Setup and Wearing

4.1. Wearing the Heart Rate Monitor

  1. Moisten Electrodes: Moisten the electrode areas of the chest strap with water.
  2. Attach Connector: Attach the heart rate monitor connector to the chest strap. Ensure the side marked 'L' on the connector faces left.
  3. Adjust Strap: Adjust the strap length to fit tightly but comfortably around your chest. Verify that the moist electrode areas are firmly against your skin and the COOSPO logo on the connector is in a central and upright position.
CooSpo HW706 Armband Heart Rate Monitor worn on the upper arm.

Figure 3: Proper wearing position of the HW706 Armband Heart Rate Monitor

5. Operation and Connectivity

5.1. Connecting to a Smartphone App (Bluetooth)

The HW706 is compatible with various third-party apps such as CoospoRide, Wahoo Fitness, Endomondo, Polar Beat, Adidas Running, UA Run, Zwift, Nike+ Run Club, and Heartool.

  1. Enable Bluetooth: On your smartphone, go to Settings and toggle Bluetooth to the ON position.
  2. Open App: Open your preferred fitness app. Do NOT attempt to pair the device directly from your phone's Bluetooth settings page; instead, connect through the app's device pairing menu.
  3. Pair Device: Within the app, navigate to the device pairing or sensor settings and select the HW706 from the list of available devices.

Note: For Nike+ Run Club, refer to the app's running settings for steps on displaying heart rate data.

Image illustrating third-party app compatibility with a smartphone displaying heart rate data from the HW706.

Figure 4: Third-party App Compatibility

5.2. Connecting to an ANT+ Watch or GPS Bike Computer

The HW706 supports ANT+ connectivity for devices like Garmin, Wahoo, and other ANT+ enabled computers.

  1. Wear Monitor: Ensure the heart rate monitor is worn correctly as described in Section 4.1.
  2. Add Device: On your ANT+ compatible watch or GPS bike computer, navigate to the sensor settings and find/add the HW706 to the ANT+ device list.
  3. Start Training: Begin your training session as prompted by your device and monitor your heart rate in real-time on its display.

Tip: Both ANT+ and Bluetooth compatibility allow wireless connection to both smartphones and GPS devices simultaneously or separately.

Diagram showing BLE & ANT+ Connectivity of the HW706 to smartwatches, GPS bike computers, and fitness equipment.

Figure 5: BLE & ANT+ Connectivity

6. Maintenance

The HW706 is a high-tech instrument that requires careful handling. Follow these instructions to ensure reliable measurement and maximize its lifespan.

6.1. Heart Rate Connector Care

  • Detach the connector from the strap after each use.
  • Dry the connector with a soft towel.
  • Do not use cleaning chemicals.

6.2. Chest Strap Care

  • Clean the strap under running water after each use.
  • Hang to dry.
  • Do not clean the strap in a washing machine or dryer.
  • Never use cleaning chemicals, as they may cause rapid aging of the strap and shorten its service life.
  • Do not stretch the strap or bend the electrode areas sharply.
  • Do not store the heart rate monitor wet in non-respirable materials to prevent rapid oxidation. Always dry and store the strap and the connector separately.

7. Battery Replacement

The HW706 uses a CR2032 coin cell battery.

  1. Open Battery Cover: Use a coin to twist the battery cover counter-clockwise until it clicks out of place.
  2. Remove Old Battery: Carefully remove the old battery. Properly dispose of used batteries in accordance with local environmental regulations.
  3. Insert New Battery: Replace the battery with the positive (+) side facing up.
  4. Close Battery Cover: Use a coin to twist the battery cover back into place, ensuring it is securely closed.

WARNING: To avoid danger, batteries should be kept away from children.

8. Specifications

Feature Specification
Weight 15 g
Battery Life 400 hours
Heart Rate Range 30 - 240 bpm
Waterproof Rating IP67
Wireless Connectivity Bluetooth & ANT+
Dimensions (Size) 60 x 33.8 x 12.2 mm
Wireless Distance Bluetooth: 10 m, ANT+: 6 m
Strap Adjustable Length 65 - 95 cm
Applicable Smart Phones iOS 7.0 or above (iPhone 4s or above), Android 4.3 or above with Bluetooth 4.0
Close-up of the HW706's high-precision optical HR sensor on the back of the device, showing green LED lights and regulatory markings.

Figure 6: High-precision Optical HR Sensor

9. Troubleshooting

If you encounter issues with your CooSpo HW706, consider the following:

  • No Heart Rate Reading:
    • Ensure the chest strap electrodes are sufficiently moistened.
    • Check that the heart rate monitor is positioned correctly on your chest, with the electrodes making good skin contact.
    • Verify the battery is not depleted. Replace if necessary (refer to Section 7).
  • Connectivity Issues (Bluetooth/ANT+):
    • Make sure Bluetooth (for apps) or ANT+ (for watches/computers) is enabled on your receiving device.
    • Ensure the HW706 is within the specified range (Bluetooth: 10m, ANT+: 6m).
    • Try restarting both the HW706 (by removing and reinserting the battery) and your receiving device.
    • If connecting to an app, ensure you are pairing through the app's settings, not directly through the phone's Bluetooth menu.
    • Check for potential interference from other electronic devices (refer to FCC Statement in Section 2.2).
  • Inaccurate Readings:
    • Ensure the strap is snug but comfortable. A loose strap can cause inaccurate readings.
    • Re-moisten the electrodes if they have dried out during exercise.
    • Avoid using cleaning chemicals on the electrodes or sensor, as residues can affect performance.

If problems persist, please refer to the Warranty/Support section for further assistance.

10. User Tips

  • For optimal performance, always moisten the electrode areas of the chest strap before each use.
  • Regularly clean the chest strap with water after workouts to prevent salt and sweat buildup, which can affect conductivity and strap lifespan.
  • Store the heart rate monitor and strap separately and dry to prevent corrosion and extend battery life.
  • When connecting to new devices or apps, ensure the HW706 is not already paired with another device to avoid connection conflicts.
  • Keep the firmware of your connected devices (smartwatches, bike computers, smartphones) updated for best compatibility and performance.
Woman exercising on a stationary bike, wearing the HW706, with icons below indicating suitability for various indoor and outdoor sports.

Figure 7: Suitable for multiple indoor and outdoor sports

11. Warranty and Support

For detailed warranty information, product support, or if you experience issues not covered in this manual, please contact CooSpo customer service.

You can also refer to the official user manual PDF for comprehensive details:

View User Manual (PDF)

When contacting support, please have your product model (HW706) and any relevant purchase information ready.

© 2024 CooSpo. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.