1. Product Overview
The SQ11 Mini Camera is a compact, portable digital video camera capable of recording Full HD 1080P video. It features infrared night vision, motion detection, and a wide-angle lens, making it suitable for various outdoor and indoor recording needs.
Product Features:
- High quality high-definition images (FULL HD 1080P DV DC)
- Imported HD camera lens
- Compact design, portable handheld DV DC
- Capable of HD video recording under low illumination
- Video formats: 1280x720P and 1920x1080P
- Picture mode: 12M (4032x3024)
- Motion detecting video: 720P and 1080P
- USB 2.0 interface for high-speed transmission
- Supports up to 32GB T-flash CARDS (Micro SD card)
- Supports TV OUT TV monitor video connection
- Built-in rechargeable lithium battery for up to 60 minutes of continuous camera use
Camera Components:
Refer to the diagram below for component identification (Note: The diagram is described textually as no direct image match was found in provided assets):
- ON/OFF Key
- Mode Key
- Infrared lamp
- LED indicator
- Ultra wide Angle lens
- TF card port
- MINI USB port
- Rest port (Reset button)
- Sling attachment point
2. Setup
2.1 Charging the Battery
The machine has a built-in rechargeable lithium battery. For first-time use, please ensure the device is fully charged. You can charge the camera in the following ways:
- Connect to a computer via USB.
- Charge while recording video (using an external USB charger or power bank).
- Insert a DV 5V charger for external recording.
During charging, a red light will flash. Once fully charged, the red light will stay on continuously. Please charge for at least 30 minutes after the red light turns solid to ensure 100% battery capacity. After each use, recharge for 2-3 hours.
2.2 Inserting the TF Card (Micro SD Card)
The camera supports up to a 32GB T-flash (Micro SD) card. Ensure a TF card is inserted before use for recording. Without a card, the camera cannot function normally and will show double flashing red and blue lights.
2.3 Connecting to a Computer
The camera can be connected to a computer directly via the MINI USB port (7). When connected, the computer should recognize it as a removable disk (U disk). Files can be copied, pasted, deleted, and formatted. The blue indicator light will show that the USB device is ready for data transmission, and the red indicator will show charging status.
Note: If the computer does not recognize the device or the removable disk logo does not pop up within 30 seconds, please reset the camera and try again. For smoother video playback, it is suggested to use a T-card reader to directly read video files from the card rather than playing directly via USB connection, as the built-in memory's data transfer speed might be insufficient for large files.
3. Operating Instructions
3.1 Power On/Off
- Power On: Press the ON/OFF Key (1) to boot. The blue light will turn on, indicating standby mode.
- Power Off: In any function mode (video, pictures, motion detecting), long press the ON/OFF Key (1) for about 6 seconds until the red and blue lights turn off. If left in standby mode without operation for 1 minute, the camera will automatically shut down.
3.2 Recording Video (720P)
- From standby mode (blue light on), click the ON/OFF Key (1) once.
- The blue light will flash three times, indicating 720P video recording has started. The video will be saved in 5-minute segments automatically with cycle cover.
- To stop recording, click the ON/OFF Key (1) again. The camera will return to blue light standby mode.
3.3 Recording Video (1080P)
- From standby mode (blue light on), press the Mode Key (2) once. The red and blue lights will turn on, indicating 1080P video mode.
- Click the ON/OFF Key (1) once. The blue light will turn off, and the red light will flash three times, indicating 1080P video recording has started. The video will be saved in 5-minute segments automatically with cycle cover.
- To stop recording, click the ON/OFF Key (1) again. The camera will return to standby mode.
3.4 Taking Pictures (12 Million Pixels)
- From standby mode (blue light on), press the Mode Key (2) twice. The red light will turn on, indicating picture mode.
- Click the ON/OFF Key (1) once. The red light will flash once, and a 12-megapixel picture (4032x3024) will be automatically saved.
3.5 Infrared Night Vision
- To Open: In any standby mode, long press the ON/OFF Key (1) for 2 seconds. The red light will flash twice, indicating the infrared night vision lamp is open.
- To Close: In night vision mode, long press the ON/OFF Key (1) for 2 seconds. The red light will flash three times, indicating the infrared night vision lamp is off.
3.6 Motion Detection Mode
- 720P Motion Detection: In blue light standby mode, press the Mode Key (2) for 3 seconds. The red light will flash three times, and the blue light will turn on, indicating 720P motion detection video mode. When motion is detected, the camera will record 720P video in 5-minute segments. If no motion is detected, it will remain in standby. Click any button to exit motion detection mode.
- 1080P Motion Detection: In 1080P video mode (red and blue lights on), long press the Mode Key (2) for 3 seconds. The red and blue lights will flash three times, then the red light will stay on, indicating 1080P motion detection video mode. When motion is detected, the camera will record 1080P video in 5-minute segments. If no motion is detected, it will remain in standby. Click any button to exit motion detection mode.
3.7 TV OUT Mode
Connect the camera to a TV using the provided USB TV line. After booting, the TV screen will display the camera's image, allowing you to take photos, record videos, and use motion detection directly on the TV screen.
3.8 Setting Time Watermark
The camera automatically creates a TIMEREST.txt document in the TF card directory. Connect the camera to a computer, open the removable disk, and edit this text document to set the desired time. The format for the time watermark is:
YYYYMMDDHHMMSS Y(for time watermark display)YYYYMMDDHHMMSS N(for no time watermark display)
Example: 20150608192526 Y
4. Maintenance
4.1 General Care
- Cleaning: Do not use the camera in environments with excessive dust. Avoid dust impacting the lens and other components.
- Environmental Conditions: Use the camera under natural temperatures and suitable humidity. Do not place the product in damp working environments, as it is not waterproof. Avoid pouring water or exposing it to rain.
- Shooting Illumination: Ensure adequate light sources when using the camera. Avoid pointing the camera directly at super bright light sources or the sun to prevent damage to the optical device.
4.2 Battery Care
The camera may become warm during use, which is normal due to its real HD high DV product consumption current. This is not an indication of a faulty product. Always ensure the battery is fully charged after each use to maintain its lifespan.
4.3 Waste Treatment
Please dispose of the product responsibly and in an environmentally friendly manner. Do not throw the product into fire to avoid explosion.
5. Troubleshooting
- Camera shuts down automatically:
- If the battery is insufficient or the TF card is full, the camera will flash red and blue lights for 5 seconds and then shut down to protect files. Recharge the battery or clear the TF card.
- If no TF card is inserted, the camera will flash red and blue lights for 5 seconds and then power off. Insert a TF card.
- If there is no operation after booting, the camera will automatically shut down after 1 minute.
- Camera crashes/buttons unresponsive: Use a sharp object to insert into the Rest port (8) to perform an invalid reset. The camera should then function normally.
- Computer not recognizing the camera: If the computer doesn't detect the camera or the removable disk icon doesn't appear within 30 seconds, try resetting the camera and reconnecting.
- Video playback issues (not smooth): If playing video files directly from the camera via USB connection results in choppy playback, it is recommended to use a TF card reader to transfer and play the files directly from the card.
- Double flashing red and blue lights: This indicates that a T-flash (Micro SD) card is not inserted or not recognized. Ensure the card is properly inserted.
6. Specifications
| Item | Specification |
|---|---|
| Video format | AVI |
| Video coding | M-JPEG |
| Video resolution ratio | 1280x720P, 1920x1080P |
| Video frame rate | 30 fps |
| Player software | Operating system or mainstream video player software |
| Picture format | JPG |
| Image proportion | 4:3 |
| Support system | Windows ME/2000/XP/2003/Vista; Mac OS; Linux |
| Battery capacity | 200mAh |
| Working time | About 100 minutes |
| Charging voltage | DC-5V |
| Interface type | Mini 8Pin USB |
| Storage support | TF card (Micro SD) |
| Infrared night vision distance | 3-5 meters |
| Battery type | High capacity polymer lithium electricity |
| Camera Stabilization | NONE |
| Type | Mini |
| Certification | CE, FCC |
7. User Tips
- Optimal Lighting: For best video and picture quality, ensure adequate lighting. Avoid direct sunlight or extremely bright light sources.
- Stable Recording: Although the camera is mini, for stable footage, try to keep it steady or mount it appropriately, especially during motion detection recording.
- Regular Charging: To prolong battery life and ensure readiness, fully charge the camera after each use.
- TF Card Management: Regularly check the available space on your TF card to avoid recording interruptions. Back up important footage frequently.
8. Important Information & Support
8.1 Legal Disclaimer
⚠️️Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
8.2 Additional Resources
For a detailed user manual in PDF format, please refer to the official document available at: SQ11 Mini Camera User Manual (PDF).
8.3 Warranty Information
Specific warranty details are not provided in the product information. Please refer to your purchase documentation or contact the seller for warranty-related inquiries.