1. Product Overview
The LAUNCH X431 CRP919 EV is a professional diagnostic tool specifically designed for new energy vehicles (EVs). It offers comprehensive system diagnostics, ECU coding, active tests, and over 43 service functions. This tool is compatible with a wide range of EV car brands globally and supports advanced protocols like CANFD and DOIP, along with FCA AutoAuth for secure gateway access.

Figure 1.1: LAUNCH CRP919 EV Diagnostic Tool highlighting ECU Coding, 43+ Hot Services, All System Scan, Active Tests, and FCA AutoAuth.
2. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, read this user's manual carefully and observe the following safety precautions:
- There are no user-serviceable parts. Servicing should be performed by qualified personnel using identical replacement parts. Disassembling the device will void the warranty.
- This tool contains an internal Lithium Polymer battery. Do not disassemble, crush, pierce, or dispose of the battery in fire or water. The battery can burst or explode, releasing hazardous chemicals.
- This product is not a toy. Keep away from children.
- Do not expose the device to rain or wet conditions.
- Do not place the device on any unstable surface.
- Never leave the device unattended during charging. Place it on a non-flammable surface.
- Handle the device with care. If dropped, check for breakage.
- Do not operate the tool in explosive atmospheres.
- Keep the tool dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Individuals with pacemakers should consult their physician before use due to potential electromagnetic interference.
- Always perform automotive testing in a safe environment.
- Do not operate or observe the tool while driving. This can cause driver distraction and lead to accidents.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, and test equipment away from moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area; exhaust gases are poisonous.
- Use wheel blocks and never leave the vehicle unattended during tests.
- Exercise extreme caution around ignition coil, distributor cap, ignition wires, and spark plugs as these components create hazardous voltages when the engine is running.
- Ensure the transmission is in Park (A/T) or Neutral (M/T) and the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
3. Product Components and Controls
3.1. Device Layout
- Charging Port: Connects the tool to a PC or power adapter for charging.
- DB15 Diagnostic Connector: Connects the tool to the vehicle's Data Link Connector (DLC).
- Power Button: Turns the tool on/off.
- Display Screen: 7-inch touch screen for displaying test results and navigation.
- Charging LED: Red indicates charging, Green indicates fully charged.
- Return Button: Returns to the previous menu.
- Select Buttons (Up/Down/Left/Right): Navigates through menus, submenus, and screen data.
- OK Button: Confirms a selection or action.
- HOME Button: Navigates to the Job Menu screen.
- Adjustable Stand: Allows for comfortable viewing angles or hanging on a steering wheel.
- Camera Flash: Provides illumination for the rear camera.
- Rear Camera: For taking pictures.
4. Setup Instructions
4.1. Package Contents
Upon unboxing, ensure all items are present:
- Diagnostic tool (x1)
- OBD II diagnostic cable (x1)
- DC 5V charging cable (x1)
- Power adaptor (x1)
- Multilingual quick start guide (x1)
- User manual (x1)
- Adaptors (various)

Figure 4.1: Package contents including the diagnostic tool, cables, charger, manual, and adaptors.
4.2. Charging the Device
There are two methods to charge your CRP919 EV tool:
- Via Charging Cable & Power Adaptor: Plug one end of the included charging cable into the DC-IN port of the tool and the other end into the external DC power adapter.
- Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool and the other end into the vehicle's DLC. Note: Charging via the OBD diagnostic port will consume the vehicle's battery power and is not recommended for primary charging.
The charging LED will illuminate solid green when the battery is fully charged.
4.3. Initial Power On and System Settings
- Press the Power Button for approximately 3 seconds to turn on the device.
- Upon first use, the screen will display a welcome page. Tap