SUYIJIA 18650 60V Harley Electric Car

Contents

SUYIJIA 60V 18650 Lithium Battery Pack User Manual

Model: 18650 60V Harley Electric Car

1. Introduction

This manual provides essential information for the safe and efficient use of your SUYIJIA 60V 18650 Lithium Battery Pack. Please read it thoroughly before installation and operation to ensure optimal performance and longevity of your battery.

SUYIJIA 60V 18650 Lithium Battery Pack and Harley Electric Scooter
The SUYIJIA 60V 18650 Lithium Battery Pack, suitable for Harley-style electric motorcycles.

2. Safety Warnings

  • ⚠️ Do not disassemble the battery to avoid electric shock or fire.
  • ⚠️ Do not use the battery in high-temperature or humid environments.
  • Keep the battery out of reach of children to prevent accidental operation.
  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

3. Specifications

3.1. Technical Parameters

Parameter Value
Battery Cell Type Lithium-ion battery (18650)
Rated Voltage 60V
Nominal Capacity 20Ah, 30Ah, 40Ah (depending on model)
Working Voltage Range 60V
Maximum Charging Current 5A
Charging Voltage 67.2V
Continuous Discharge Current 35A
Instantaneous Discharge Current ≤70A
Life Span More than 1000 cycles
Weight 4-7.2KG (depending on capacity)
Connection Type Others (specific connector not detailed)
Certification CE

3.2. Dimensions

  • Long Battery Pack: 360mm (Length) x 175mm (Width) x 75mm (Height)
  • Short Battery Pack: 360mm (Length) x 250mm (Width) x 95mm (Height)
Battery pack dimensions and features
Diagram illustrating the portable handle and charging/discharging port, along with dimensions.

4. Setup and Installation

  1. Ensure Correct Polarity: During installation, verify the positive and negative terminals are correctly oriented.
  2. Initial Charge: Fully charge the battery before its first use.
  3. Installation: Carefully insert the battery pack into the designated compartment of your electric vehicle. Ensure it is securely seated.
Person installing battery into electric scooter
Proper installation of the battery pack into an electric scooter.

4.1. Charging

Use the provided special charger to charge the battery. Connect the charger to the battery's charging port and then to a power outlet. The charging voltage is 67.2V and the maximum charging current is 5A.

Close-up of battery charging and discharging port
Detail of the charging and discharging port on the battery pack.
Special charger for the battery pack
The special charger included with your battery pack.

5. Operation

  • Turn off the device power promptly after use to conserve battery life.
  • The battery features an intelligent BMS management system for safe and stable operation.
Battery charge indicator graphic
Graphic representing sufficient capacity and long-lasting battery life.

6. Maintenance and Storage

  • Avoid Over-Discharge: Maintain battery charge above 20% to prolong its lifespan.
  • Temperature and Sunlight: Do not expose the battery to direct sunlight for extended periods. Avoid high-temperature environments.
  • Storage: Do not store the battery together with metal objects to prevent short circuits.
  • Long-term Storage: For storage periods longer than 6 months, ensure the battery is charged to approximately 90% capacity.

7. Troubleshooting (FAQs)

  1. Battery does not charge: Check whether connections are secure and normal.
  2. Battery overheats: Discontinue use immediately and contact after-sales service.
  3. Device fails to start: Try reseating the battery connection or recharging.
  4. Multimeter reads 0 V across terminals: Verify whether the third and fourth protection functions have been triggered before diagnosing the battery as faulty.
  5. Multimeter shows lower voltage than actual: Discharge the battery to 20% state of charge (SOC), then fully recharge it.

8. BMS Protection Features

The battery pack is equipped with an intelligent Battery Management System (BMS) that provides multiple hardware protections, ensuring safety and extended battery life. These include:

  • Balanced Function
  • Overvoltage Protection
  • Overcharge Protection
  • Overdischarge Protection
  • Overcurrent Protection
  • Short Circuit Protection
  • Temperature Protection
  • Reverse Charge Protection
Intelligent BMS management system circuit board
Close-up of the intelligent BMS management system, featuring Grade A power cells and multiple protections.
Icons representing eight core technology guarantees
Visual representation of the eight core technology guarantees provided by the BMS.

9. Applications

This versatile battery pack is widely used in various applications, including:

  • Electric Bicycles and Harley Electric Motorcycles
  • E-scooters and Electric Tricycles
  • Electric Vehicles (EVs)
  • Trolling Motors
  • Home Energy Storage Systems
  • Medical Equipment
  • Solar Power Supply Systems and Solar Panels
  • Power Tools and Instruments
  • LED Lighting Equipment
  • Remote Control Toys
  • Inverters
  • Household Appliances and Emergency Equipment
Various Harley-style scooters compatible with the battery
The battery pack is suitable for 99% of Harley-style scooters on the market.

10. User Tips

  • Always use the provided charger to ensure compatibility and prevent damage.
  • Regularly check all connections to ensure they are secure, especially if experiencing charging issues.
  • For optimal performance and longevity, avoid completely draining the battery. Aim to recharge when the charge level is above 20%.

11. Warranty and Support

For any issues or support needs, please refer to the following guidelines:

  • Defective products may be returned or exchanged within 1 day of receipt.
  • For issues discovered within 7 days of receipt, please contact after-sales service.

For further details, you may consult the official user manual PDF referenced by the seller: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.