VISHRT QWE-741

Contents

Industrial Endoscope Camera

Model: QWE-741 | Brand: VISHRT

Product Description

This is a high-performance industrial endoscope equipped with a high-definition color LCD screen. The main unit features an ergonomic design, allowing one-handed operation of the primary function buttons. It includes a built-in 2600mAh rechargeable battery, providing up to 3 hours of continuous operation.

Safety and Maintenance

  • Do not violently impact the camera probe or forcefully pull the cable.
  • When using in environments with sharp protrusions, exercise caution to prevent damage to the waterproof protective layer of the probe.
  • The camera probe is not made of high-temperature-resistant material. When inspecting car engines, ensure the internal temperature has cooled to normal levels.
  • When not in use, keep the lens and main unit clean and dry, and avoid contact with oil, grease, or other corrosive substances.
  • This product is not suitable for use by individuals with limited physical, sensory, or mental capabilities.
  • Do not allow children to handle or operate this device.

Setup

Battery Instructions

  • Use a 5V household charger that complies with safety regulations to charge this device.
  • This device supports operation while charging.
  • If the device is left unused for an extended period, ensure it is charged at least once every 3 months to prevent irreversible damage caused by over-discharging the battery.
Diagram showing the endoscope being charged with a 5V 1A/2A adapter and a removable 2600mAh battery.
Figure 1: Charging the Industrial Endoscope Camera. The image shows the endoscope connected to a wall charger via a USB cable, with an inset showing the 2600mAh removable battery.

Charging Guide

  1. Connect the device to a Type-C adapter (5V-1A). The product does not support fast charging.
  2. During charging, the red LED indicator will remain lit.
  3. When the device is fully charged, the red light will turn off (use a Type-C charging cable to charge the device).

Accessory Installation Guide

The endoscope comes with several accessories to enhance its functionality:

  • Hook: For retrieving small objects.
  • Magnet: For retrieving metallic objects.
  • Side Mirror: For viewing at a 90-degree angle (for single-lens models, or as an additional view for dual-lens models).
  • Replacement Clip: Spare clip for securing accessories.
Image showing the endoscope unit, coiled cable, user manual, USB-C cable, and three accessories: a hook, a magnet, and a side mirror.
Figure 2: Included accessories with the Industrial Endoscope.

Installation Diagram

Diagram showing how to attach the hook or magnet accessory to the endoscope camera tip.
Figure 3: Attaching the hook or magnet.
Diagram showing how to attach the side mirror accessory to the endoscope camera tip.
Figure 4: Attaching the side mirror.

Operating Instructions

Function Guide

  • Black-and-White Mode: Press briefly to toggle between color and black-and-white modes.
  • Lighting Adjustment: Press briefly to adjust the brightness of the camera LED (4 levels: 0-1-2-3, with 3 being the brightest and 0 being off, which is the default).
  • Rotate/Switch Camera: Press briefly to rotate the image 180 degrees; press and hold to switch between front/side cameras (only applicable for dual-camera models).
  • Scene Mode: Press briefly to cycle through scene modes (default: normal; press once to reduce exposure, press again for maximum exposure, and press once more to return to normal exposure).
  • Zoom In/Out Key: Press briefly to zoom in (cycles through levels 1-2-3-1-2-3).
  • Power Button: Press and hold the power button or flip the switch on the right side of the device according to your model to turn it on/off.
Close-up view of the endoscope's 2.8-inch monitor, showing the screen layers and control buttons.
Figure 5: Endoscope 2.8-inch IPS Monitor and Control Buttons.

Video Demonstration

Video 1: Demonstration of the Industrial Endoscope Camera's features, including adjusting LED brightness, zooming, and inspecting various environments like engine parts, plants, and water pipes.

Specifications

FeatureDetail
Product NameIndustrial Endoscope
Brand NameVISHRT
Model NumberQWE-741
Screen TypeIPS Color Display (2.8 inch)
SensorCMOS
Lens (mm)8mm
Optimal Focal Length40-80mm (2cm-10cm for blurry imaging troubleshooting)
Waterproof RatingIP67
Viewing Angle70°
Charging5V/1A (Type-C Port)
Battery Capacity2600mAh
Battery Charging Time3 hours
Battery Usage Time4.5 hours
Operating Temperature33.8°F - 113°F (1°C - 45°C)
Wire TypeHard Wire
Cable Length Options2m, 5m, 10m, 15m, 20m, 30m, 50m, 100m
CertificationCE, RoHS
Industrial Endoscope Camera with 2.8-inch IPS screen, 8mm probe, and coiled cable.
Figure 6: Industrial Endoscope Camera with its main components.
Close-up of the endoscope camera's 1080P HD sensor and 8 LED lights.
Figure 7: 1080P HD Sensor and 8 LED lights on the endoscope probe.
Industrial Endoscope Camera with 2.8-inch IPS screen, 8mm probe, and coiled cable.
Figure 8: The endoscope's flexible cable, available in lengths up to 100 meters, providing clear images without delay.

Troubleshooting

  1. Lag When Outputting Photos: Check if the device has sufficient battery power or restart the device.
  2. Blurry Imaging: The optimal focal length is 2cm-10cm. Adjust the distance from the object or clean the front of the camera lens with an alcohol wipe.
  3. Camera Overheating: The camera heating up is normal, especially when the LED brightness is set to the highest level.

⚠️ Warning! Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in product damage.

User Tips

  • For best image clarity, ensure the camera lens is clean before use.
  • Experiment with different LED brightness levels to find the optimal setting for your inspection environment.
  • When navigating tight spaces, gently guide the probe to avoid snagging or damage.
  • Utilize the zoom function for detailed examination of specific areas.

Warranty and Support

For detailed warranty information, technical support, and further documentation, please refer to the official user manual PDF.

You can access the full user manual here.

Statement of Compliance

Disclaimer

⚠️Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

This device is certified with CE and RoHS standards.

MADE IN CHINA

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.