LZJV YL059

Contents

YL059 Mini Drone User Manual

Model: YL059 | Brand: LZJV

1. Introduction

To ensure safe and enjoyable use of your YL059 Mini Drone, please read this manual carefully before operation. Keep this manual for future reference. This drone features advanced technologies including mechanics, electronics, aerodynamics, and high-frequency transmission. It must be correctly assembled, calibrated, and operated to prevent accidents. Improper use can lead to serious injury or property damage. Users are responsible for any losses caused by incorrect operation.

If you have any questions regarding the use, operation, maintenance, or other aspects, please contact your local dealer or our support team.

Video: YL059 Mini Drone features and flight demonstration.

2. Safety Guidelines

Safety is paramount when operating a drone. Please observe the following guidelines:

2.1. Flight Environment

  • Fly only in open outdoor areas.
  • Do not fly over crowds, near airports, or in restricted zones.
  • Maintain a minimum distance of 50 meters (164 feet) from people, animals, and vehicles.
  • Stay away from high-voltage power lines and cell towers, as these can interfere with the drone's compass.
  • Drone flight environment safety icons

    Image: Visual representation of safe and unsafe flight environments.

2.2. Weather Conditions

  • Avoid flying in adverse weather conditions such as strong wind, rain, snow, or lightning.
  • Do not fly if the battery is almost empty or the GPS signal is weak.
  • Do not use this product in wind speeds exceeding 10 meters per second (22 miles per hour).
  • Drone weather condition safety icons

    Image: Icons depicting unsuitable weather conditions for drone flight.

2.3. Flight Altitude Restrictions

  • According to local aviation regulations, the flight altitude must not exceed 120 meters (400 feet).
  • Drone altitude restriction icon

    Image: Icon indicating maximum flight altitude.

2.4. Warning: Rotating Parts

  • Keep clear of rotating propellers and motors to avoid injuries.
  • Warning icon for rotating drone parts

    Image: Warning icon for rotating propellers and motors.

3. Package Contents

The YL059 Mini Drone package includes the following items:

  • YL059 Drone (1)
  • Remote Control (1)
  • Fan Blade A (2)
  • Fan Blade B (2)
  • User Manual (1)
  • USB Charging Cable (1)
  • Card Reader/Memory Card (1)
  • Screwdriver (1)
YL059 Mini Drone package contents including drone, remote, blades, and accessories

Image: Diagram showing the drone, remote control, and various accessories included in the package.

4. Product Overview

4.1. Drone Components

The YL059 drone features:

  • Fan Blades: Located on each arm. Ensure they are correctly installed before flight.
  • Switch: Power on/off.
  • Lithium Battery: Powers the drone. Ensure it is fully charged before use.
  • High-Resolution Camera: Captures clear images and videos. Keep it clean and free from obstructions.
  • Brushless Motor: Drives the propellers. Handle with care to prevent damage.
  • LED Light: Indicates the drone's status.
  • Obstacle Avoidance Function: Helps prevent collisions.
  • Airdrop Connection: For attaching airdrop accessories.
Diagram of YL059 drone components including fan blades, battery, camera, and motors

Image: Detailed diagram of the YL059 drone's main components.

4.2. Remote Control Layout

The remote control features:

  • Handheld Holder: Pull up to secure your smartphone.
  • Throttle (Left Joystick): Controls altitude (up/down) and yaw (left/right rotation).
  • Rudder (Left Joystick): Controls left/right rotation.
  • Elevator (Right Joystick): Controls forward/backward movement.
  • Aileron (Right Joystick): Controls left/right side flight.
  • Power Switch: Turns the remote control on/off.
  • Select/Photo Button: Navigates menus and takes photos.
  • Return Button: Initiates Return-to-Home (RTH) function.
  • Confirm Button: Confirms selections in menus.
  • Menu Button: Accesses settings and file management.
  • Control Light: Indicates remote control status (e.g., charging, battery level).
  • One-Touch Start/Land Button: For automatic takeoff and landing.
  • GPS Switch: Activates/deactivates GPS mode.
  • Obstacle Avoidance Switch: Toggles obstacle avoidance mode.
  • Geomagnetic Calibration Button: Initiates compass calibration.
  • Gyroscope Calibration Button: Initiates gyroscope calibration.
  • Memory Card Slot: For storing photos and videos.
  • Charging Port: For charging the remote control.
Diagram of YL059 remote control layout with labeled buttons and joysticks

Image: Diagram illustrating the layout and functions of the remote control.

5. Setup

5.1. Propeller Installation

  1. Ensure all propellers are mounted in the correct orientation as shown in the diagram.
  2. Attach Propeller A to positions marked 'A' and Propeller B to positions marked 'B'.
  3. Secure each propeller with two screws.

Important Note:

  • Carefully check the installation to ensure the propellers are firmly seated.
  • Do not touch the propellers when the drone is powered on to avoid injuries.
Diagram showing correct propeller installation for YL059 drone

Image: Diagram detailing the correct placement of 'A' and 'B' propellers.

5.2. Battery Charging

Ensure both the drone and remote control batteries are fully charged before use.

5.2.1. Drone Battery Charging

  1. Press and hold the lock on the battery, then pull it backward to remove it from the drone.
  2. Connect the USB charging cable to the battery's charging port.
  3. Connect the other end of the USB cable to a 5V/0.8A (not included) or 5V/2A (not included) adapter.
  4. The red light on the battery will illuminate continuously during charging and turn off when fully charged.
  5. Charging time is approximately 4 hours, depending on the power source.

5.2.2. Remote Control Battery Charging

  1. Connect the USB charging cable to the remote control's charging port.
  2. Connect the other end of the USB cable to a 5V/2A adapter (not included).
  3. The red light indicates charging, and the green light indicates a full charge.
  4. Charging time is approximately 2.5 hours, depending on the power source.
Diagram showing how to charge the YL059 drone and remote control batteries

Image: Visual guide for charging both the drone and remote control batteries.

6. Operation

6.1. Pre-Flight Checklist

Before every flight, perform the following checks:

  • The battery is fully charged.
  • Propeller installation is correct (A/B matched).
  • The compass and gyroscope have been calibrated.
  • GPS lock is achieved (8 or more satellites).
  • Flight zone is clear.
  • Weather is good, with good visibility.
Pre-flight checklist for YL059 drone

Image: Checklist for essential pre-flight preparations.

6.2. Pairing Drone and Remote Control

  1. Insert the battery into the drone and place it on a flat surface.
  2. Press and hold the power switch to activate the drone.
  3. Press and hold the power switch on the remote control to activate it.
  4. The drone's indicator light will flash quickly, the remote control will announce "GPS Mode", and the drone's video feed will appear on the remote control screen.
  5. The drone's front light will be solid, and the rear light will flash slowly, indicating successful pairing.
Diagram showing the pairing process for the YL059 drone and remote control

Image: Visual guide for pairing the drone with its remote control.

6.3. Calibration

6.3.1. Gyroscope Calibration

The gyroscope must be calibrated on a flat surface.

  1. Place the drone on a flat surface.
  2. Briefly press the calibration button on the remote control. The remote control will announce "Gyroscope Calibration".
  3. The drone's lights will flash quickly. The front light will remain solid, and the rear light will flash slowly, indicating that gyroscope calibration is complete.
Diagram for YL059 drone gyroscope calibration

Image: Steps for calibrating the drone's gyroscope.

6.3.2. Compass Calibration (Horizontal and Vertical)

  1. Press the geomagnetic calibration button. The remote control will announce "Compass Calibration", and the drone's lights will flash quickly.
  2. Lift the drone and rotate it horizontally three times; the drone will emit a "Di" tone.
  3. Then rotate it vertically three times.
  4. The remote control will announce "Compass Calibration Successful". When the front lights are solid and the rear lights flash slowly, geomagnetic calibration is complete.
Diagram for YL059 drone compass calibration, showing horizontal and vertical rotations

Image: Visual guide for performing horizontal and vertical compass calibration.

6.4. Takeoff and Landing

6.4.1. Takeoff (Remote Control "Outer-Eight Unlock")

  1. Once the propellers begin to rotate, gently push the left throttle stick upwards to take off.
  2. Release the left throttle stick, and the drone will hover at its current altitude.
Diagram showing joystick movement for manual drone takeoff

Image: Illustration of the "Outer-Eight Unlock" joystick movement for manual takeoff.

6.4.2. One-Button Takeoff and Landing

  1. Once the propellers begin to rotate, the remote control will announce "Start". The drone will automatically ascend to an altitude of approximately 1.5 meters.
  2. Press the start button again, and after the remote control announces "Landing", the drone will automatically descend to the ground.
Diagram showing one-button drone takeoff and landing

Image: Diagram illustrating the one-button takeoff and landing procedure.

Important Note:

  • When operating the drone, ensure the nose points forward and the tail points towards the operator to avoid directional confusion.

7. Remote Control Functions

7.1. Joystick Operation

The joysticks control the drone's movement:

  • Left Joystick (Throttle):
    • Push up/down to control altitude.
    • Push left/right to control yaw (rotation).
  • Right Joystick (Directional):
    • Push up/down to control forward/backward movement.
    • Push left/right to control left/right side flight.
Diagram of YL059 remote control joystick movements for flight control

Image: Illustration of joystick controls for drone flight.

7.2. Language Selection

  1. Press the power on/off button to activate the remote control. After a short pause, the language selection screen will appear.
  2. Navigate using the up/down selection buttons (snapshot/video buttons) and then press the OK button to select your preferred language.
Remote control screen showing language selection interface

Image: Remote control interface for selecting language.

7.3. File Management and System Settings

  1. In the file management interface, use the up/down arrow keys (snapshot/video buttons) to select a file, then press the OK button to modify it.
  2. In the system settings interface, navigate with the up/down arrow keys (snapshot/video buttons) and press the OK button to confirm changes.

7.4. Phone Holder

Pull up the phone holder on the remote control to open it. Secure your smartphone in the holder for hands-free operation. Press and hold the GPS button to turn off the remote control screen before connecting your phone.

7.5. Speed Adjustment

After activation, the drone flies at 50% flight speed by default.

  1. Press the speed button once to hear the voice prompt "High Speed Mode" (100% flight speed).
  2. Press it again to hear "Low Speed Mode" (50% flight speed).

7.6. Vertical Camera Lens Adjustment

Use the dedicated buttons on the remote control to adjust the camera lens vertically (up/down).

7.7. Obstacle Avoidance Mode (Effective only in Indoor Mode)

  1. When powered on, the obstacle avoidance module automatically moves upwards and enters standard obstacle avoidance mode. (In obstacle avoidance mode, flight speed gradually decreases; the drone automatically stops when it detects a wall.)
  2. Press the obstacle avoidance mode button once. The remote control will announce "Obstacle Avoidance Off". The obstacle avoidance module will automatically retract, indicating that the obstacle avoidance function is deactivated.
  3. In GPS mode, the obstacle avoidance module automatically retracts when satellite signals are received. (GPS mode does not have an obstacle avoidance function).

8. Special Features

  • GPS Intelligent Positioning: Provides precise positioning and stable hovering.
  • One-Click Airdrop: Drone equipped with an airdrop device, supporting one-click airdrop via remote control.
  • Intelligent Tracking: The drone can intelligently track moving subjects.
  • GPS Surround Mode: Allows the drone to circle a point of interest.
  • One-Key Return: Automatically returns the drone to its takeoff point in case of low battery, loss of control, or over-distance.
  • Gesture Photography: Take photos with simple hand gestures.
  • 50x Zoom: For detailed close-up shots.
  • Long-Lasting Battery Life: Equipped with a 7.4V large battery for extended flight times.
  • Intelligent Following: The drone follows a designated subject.
  • Beauty Photography: Enhances photo quality.
  • Voice Prompt: Remote control provides voice prompts for various functions.
  • 180° Electrically Adjustable Camera: Allows for flexible camera angles (upward, downward, and flat shots).
  • Brushless Power: Low noise, powerful, energy-saving, and resistant to wind.
YL059 drone with GPS intelligent positioning and return functions

Image: Drone demonstrating GPS intelligent positioning and various return-to-home features.

YL059 drone performing a one-click airdrop

Image: The drone executing a one-click remote airdrop.

YL059 drone with lift obstacle avoidance head

Image: The drone's lift obstacle avoidance head in action, demonstrating sensitive perception.

YL059 drone with brushless motors for wind resistance

Image: The drone highlighting its brushless power for wind resistance and low noise operation.

Icons representing various YL059 drone features like airdrop, obstacle avoidance, GPS, and camera functions

Image: A comprehensive overview of the drone's intelligent features and capabilities.

9. Maintenance

9.1. Propeller Cleaning

  • Wipe the propellers with a soft cloth.
  • Do not use sharp tools to avoid damage.

9.2. Battery Storage

  • Store batteries in a cool, dry place.
  • Keep them away from high temperatures and direct sunlight.
  • Do not press or crush the batteries.
  • For long-term storage, ensure batteries are charged to 40-65% capacity.

10. Troubleshooting

If you encounter issues with your YL059 Mini Drone, consider the following:

  • Drone not flying steadily: Ensure all calibrations (gyroscope, compass) are performed correctly on a flat surface. Check for strong winds and fly in calm conditions.
  • Loss of control/Return issues: Verify strong GPS signal (8+ satellites). Ensure the battery is adequately charged.
  • Camera quality issues: Ensure the camera lens is clean and free from obstructions.
  • Drone not responding: Re-pair the drone and remote control. Check battery levels for both devices.

11. Specifications

FeatureDetail
Model NumberYL059
Brand NameLZJV
Camera8K HD Camera, 180° Electrically Adjustable, 720P Front WIFI, Bottom HD WIFI with Optical Flow Positioning
Motor TypeBrushless Motor
Connectivity5G WiFi FPV
Positioning SystemGPS, Optical Flow Positioning
Battery7.4V Large Battery (Included)
Charging Time (Drone)Approx. 4 hours
Charging Time (Remote)Approx. 2.5 hours
Obstacle AvoidanceLift type indoor obstacle avoidance
Max Flight Altitude120 meters (400 feet)
Package Dimensions19cm (Length) x 10cm (Width) x 7cm (Height)
Package Weight0.172 kg
CertificationCE

12. User Tips

  • Practice Makes Perfect: As a beginner, take your time to get comfortable with the controls. The automatic takeoff and landing features are very helpful for new users.
  • Battery Life: The drone comes with multiple batteries, allowing for extended practice and flight time.
  • Stable Flight: Users report very stable flight, especially after proper calibration.
  • Camera Quality: The 8K camera provides good quality and fluid footage.
  • Portability: The drone comes in a good quality padded bag, making it easy to transport and protect.

13. Frequently Asked Questions (FAQ)

Q: What is the maximum flight height of the drone?
A: The drone can reach a maximum height of 120 meters (400 feet), subject to local aviation regulations.
Q: What is the flight time?
A: The drone is equipped with an ultra-long endurance 7.4V large battery, providing extended flight time. Specific flight duration may vary based on flight conditions and usage.

14. Warranty and Support

Please adhere to the regulations of local aviation authorities. Operate drones in accordance with local requirements and laws. Always fly within line of sight and avoid restricted airspaces (e.g., near airports or military zones).

14.2. User Responsibility

The user bears full responsibility for any damage or loss resulting from improper operation or non-compliance with regulations. Non-compliance may lead to fines or other legal consequences.

14.3. Prohibited Modifications

The drone must not be disassembled, modified, or tampered with. Unauthorized modifications may void the warranty and pose safety risks.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.