1. Product Overview
The Aqara High Precision Human Body Sensor represents the next-generation detection technology. It features an integrated sensitive probe, precision amplification circuitry, and high-density Fresnel lenses, enabling it to detect subtle body movements even when the user remains stationary.
This sensor is designed for versatile installation, suitable for rooftops or embedded in ceiling fixtures like recessed lights. Utilizing Zigbee 3.0 wireless communication protocol and gateway integration, it triggers automated responses to human presence events. It coordinates with smart home devices to execute various intelligent scenarios and sends remote notifications to mobile devices.
Note: This product requires a device with Zigbee 3.0 gateway functionality. Some features may require specific gateway models. For detailed support information, please visit www.aqara.com/support.



Component Identification

- Jacket: The outer casing of the sensor.
- Fresnel Lens: The primary component for detecting infrared radiation from moving objects.
- High-precision Human Body Sensor (with status indicator light): The core detection unit, including an LED indicator for status.
- Reset Key: Used for pairing and resetting the device.
- Mounting Hole: Points for securing the sensor during installation.
- Coin Slot: Used for opening the battery compartment.
2. Quick Setup
Before installation, ensure your Aqara gateway is set up and connected to the Aqara Home app.
- Add Gateway to App: Add your Aqara gateway to the app following its specific manual.
- Add Device: Open the Aqara Home app. Tap the '+' icon in the top-right corner of the home screen to access the 'Add Device' page. On the left, select the 'Sensor' category, then choose 'High-Precision Human Body Sensor' on the right. Follow the on-screen instructions to complete the pairing process.
- Support: For additional help, please visit www.aqara.com/support.
Troubleshooting Tip: If the device addition fails, move the sensor closer to the gateway and attempt the process again.
Unboxing and Initial Setup Video
3. Installation
Preparation
- After opening the packaging, detach the battery base cover and sleeve from the sensor body.
- Connect the product to the Zigbee network by following the Quick Setup instructions.
Detection Range

Valid Range Verification: After connecting to the gateway, click the reset button at the selected installation location. The gateway will emit an audible signal, indicating that the device is now in effective communication and within the valid detection range.
Installation Method 1 (Ceiling Mounted with Screws)
- Use screws and expansion joints to secure the battery cover in the appropriate position on the ceiling.
- Bring the handheld sensor close to the battery cover, align the Aqara LOGO with the arrow pattern on the cover, then turn it clockwise to secure it firmly.

Installation Method 2 (Recessed Ceiling Installation)
- Use the sleeve accessories to secure the sensor into a circular hole in the ceiling.
- Bring the handheld sensor close to the battery cover, align the Aqara LOGO with the arrow pattern on the cover, then turn it clockwise to secure it firmly.
Important Installation Notes
- The product's detection zone must exclude household appliances with surface temperature rise (e.g., refrigerators and microwaves) and sun-exposed items like curtains that generate thermal sensations, to prevent false triggering.
- The product should be installed at a height of 2 meters or more and ensure that it is not accessible to children.
- To ensure safety, do not use double-sided tape to stick or fix the product to avoid falling.
- To ensure stable wireless communication, avoid installing on metal surfaces.
4. Operating the Sensor
Once installed and connected to your Aqara gateway, the sensor operates automatically. It detects human presence and movement, triggering predefined smart home scenarios and sending notifications via the Aqara Home app or Apple Homekit.
- Automated Scenarios: Configure rules in the Aqara Home app or Apple Homekit to automate actions based on detected presence, such as turning lights on/off, adjusting climate control, or activating security alerts.
- Real-time Monitoring: Access device logs, movement times, and other information through the mobile app at any time.
- Range Test Mode: Utilize the range test mode (as described in the Product Overview) to assist in adjusting the position and angle of the sensor for optimal detection coverage.
5. Maintenance
Battery Replacement
The sensor uses a CR2450 battery and is designed for ultra-low power consumption, providing standby power for approximately 6 years. When the battery level is low, the mobile app will remind you to replace it.
- To replace the battery, gently twist the sensor body counter-clockwise from its base to open the battery compartment.
- Remove the old CR2450 batteries and insert new ones, ensuring correct polarity.
- Close the compartment by aligning the Aqara LOGO with the arrow pattern on the cover and twisting clockwise until secure.
Cleaning
To maintain optimal performance, periodically wipe the sensor's lens and body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
Optimal Performance Environment
Ensure the sensor's detection zone remains clear of heat-generating appliances (e.g., refrigerators, microwaves) and sun-exposed items like curtains that can generate thermal sensations, as these can cause false triggers.
6. Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause & Solution |
|---|---|
| Device addition failed | Move the device closer to the gateway and try again. Ensure the gateway is properly set up. |
| Indicator light not working | Check battery level and replace if necessary. Ensure the device is powered on and connected. |
| Reset key is invalid | Ensure the reset key is pressed correctly and for the appropriate duration as per pairing instructions. |
| Zigbee connection failed | Verify gateway status. Ensure no strong interference sources are nearby. Re-pair the device. |
| Failure of human body sensing | Check for obstructions in the detection zone. Ensure proper installation height and angle. Verify device is powered and connected. |
| False triggering | Relocate the sensor away from heat sources (e.g., refrigerators, microwaves, direct sunlight). Adjust sensitivity settings if available in the app. |
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | RTCGQ13LM |
| Brand Name | Aqara |
| Product Dimensions | 74 × 74 × 43.3 mm |
| Sleeve Dimensions | 113 × 113 × 41 mm |
| Wireless Communication | Zigbee 3.0 (RF) |
| Compatibility | Apple Homekit, Aqara Home |
| Power Source | DC (Battery Powered) |
| Battery Model | CR2450 (Included) |
| Operating Temperature | -10°C ~ +50°C |
| Operating Humidity | 0 ~ 95% RH, no condensation |
| Detection Range | 5m (6m diameter circle at 5m distance) |
| Detection Angle | Approximately 60° conical |
| Waterproof Rating | IPX5 |
| State of Assembly | Ready-to-Go |
| Control Channels | 2 CHANNELS |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- Optimal Placement: To prevent false triggers, avoid placing the sensor near heating vents, direct sunlight, or appliances that generate heat. Consider the conical detection angle for best coverage.
- Long Battery Life: The sensor boasts an impressive 6-year battery life with its ultra-low power consumption design. You'll receive an in-app notification when it's time for a replacement.
- Water Resistance: With an IPX5 waterproof rating, the sensor can handle wet conditions, making it suitable for bathrooms or other areas where splashes might occur.
- Home Automation Integration: Leverage the sensor's Zigbee 3.0 and Homekit compatibility to create advanced automation routines. For example, turn on lights when motion is detected in a room, or trigger an alert if unexpected movement occurs.
9. Warranty & Support
Warranty Policy
This product's after-sales service strictly complies with the Consumer Rights Protection Law and Product Quality Law of the People's Republic of China, offering a three-guarantee service (repair, replacement, and refund). All transactions must be supported by an invoice.
| Type of Service | Service Policy |
|---|---|
| Return of Goods | Returns due to product quality issues within 7 days from the day after self-signing. |
| Exchange Goods | You may exchange the product for quality reasons within 15 days from the day after you sign for it. |
| Keep in Repair | Repair for product quality issues within 1 year from the day after self-signing receipt. |
Friendly Reminder: To ensure product safety during transportation, we recommend keeping the packaging box for at least 30 days after your signature.
Support Information
- Service Phone: 400-990-7930
- Service Website: www.aqara.com/support
- Manufacturer: Shenzhen Lvmi Lianchuang Technology Co., Ltd.
- Address: Liuxian Avenue, Taoyuan Street, Nanshan District, Shenzhen, 8th Floor, Jinqi Zhigu Building, No.1 Tangling Road
For the most detailed and up-to-date instructions, you can also refer to the official user manual PDF: Aqara High Precision Human Body Sensor User Manual (PDF).
10. Safety Precautions
- This product is not a toy. Keep children away from this product.
- This product is intended for indoor use only and must be installed on a ceiling 2 meters or higher.
- To prevent the risk of falling, the use of tools such as double-sided tape to fix this product is prohibited.
- Do not place this product near heat sources.
- Do not attempt to repair this product yourself. This task should be performed by an authorized professional.
- This product is intended solely to enhance the entertainment and convenience of home life, as well as to provide device status alerts. Should any user violate the product instructions or these precautions, the manufacturer shall not be liable for any resulting risks or property losses.
11. Names and Concentrations of Hazardous Substances
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Electronic component | 0 | 0 | 0 | 0 | 0 | 0 |
| PCBA | 0 | 0 | 0 | 0 | 0 | 0 |
| Button cell | 0 | 0 | 0 | 0 | 0 | 0 |
| Other hardware components | 0 | 0 | 0 | 0 | 0 | 0 |
This form is prepared in accordance with the provisions of SJ/T11364.
- 0: Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
- X: Indicates that the harmful substance exceeds the limit specified in GB/T26572 in at least one homogeneous material of the component.