1. Important Notices
- Please read all instructions and warnings carefully before using this product.
- For your safety and the safety of others, do not watch videos while driving. Always comply with local traffic laws.
- Do not use or store this product in environments with high temperatures, strong light, magnetic fields, or other extreme conditions.
- Avoid any strong physical impact, such as dropping, stepping on, or crushing the device.
- Use only power supplies that match the product's rated voltage. Using an incorrect power source may result in malfunction or damage.
- Do not disassemble the product. Doing so is strictly prohibited and will void the warranty.
- Always operate the device in accordance with the instructions provided. The user assumes full responsibility for any damage or risk caused by improper use.
Note: Information in this manual is subject to change without prior notice.
2. Product Overview
The OTTOCAST Cabin Care is an all-in-one smart car adapter that combines wireless CarPlay functionality with a real-time HD baby camera for cabin monitoring. It allows you to seamlessly integrate child monitoring into your car's factory screen while enjoying the convenience of wireless CarPlay.
Key Features:
- Dual-Core Smart Hub: Wireless CarPlay & HD Monitoring Camera
- Smart Display: Eye-Friendly Interface on Your Car Screen
- Full HD Camera: 1080P Clarity, 150° Wide-Angle, Night Vision
- Effortless Setup: Plug & Play in Minutes
- Safe Driving: Minimize Distraction, Maximize Awareness

3. Package Contents
The complete kit includes the following items:

- Wireless CarPlay Adapter (Main Unit)
- Owl-Shaped HD Monitoring Camera
- USB-A to USB-C Converter
- USB-C Power Cable (for camera)
- Adjustable Mounting Strap
- Versatile Mounting Bracket
- Adjustable Screw Cap for Secure Fit
- User Manual (this document)
Note: If the actual items differ from this list, the contents of the received package shall take precedence.
4. Parts Names & Functions
4.1. Camera

- 1. LED Light:
- Solid Blue: Power On
- Flashing Green: Waiting for Protocol Connection
- Solid Green: Normal Operation
- Alternating Red/Green: System Updating
- Solid White: System Update Complete
- Flashing Red: System Update Error
- Flashing Blue (until button release): Reset Initiated
- 2. Type-C Port: Power Supply.
- 3. Hidden Button:
- Press and hold for 10 seconds to erase all data and restore factory settings (requires re-pairing with receiver after reset).
- Press and hold for 3 seconds to re-pair with receiver.
4.2. Receiver (Wireless CarPlay Adapter)

- 1. USB Plug: Power supply and data transmission, connect to the data port of the head unit.
- 2. LED Light:
- Solid Blue: Power On
- Flashing Green: Waiting for Protocol Connection
- Solid Green: Normal Operation
- Alternating Red/Green: System Updating
- Solid White: System Update Complete
- Flashing Red: System Update Error
- Solid Red: P2P Mode
- Flashing Blue (until button release): Reset Initiated
- 3. Smart Button:
- Short press: Quick disconnect.
- Long press 3s: Enter P2P mode.
- Long press 10s: Erase all data and restore factory settings.
5. Compatibility
5.1. Car Compatibility
This product is only compatible with vehicles that originally support wired Apple CarPlay. It is not compatible with vehicles that only have a wireless CarPlay connection, nor with Tesla or BMW vehicles.
How to check if your car has wired CarPlay:
- Connect your iPhone to the car's USB port using the original data cable.
- If the CarPlay icon or a related prompt appears on the car's display, your car supports wired CarPlay, and this product is compatible.

If you're still unsure whether your car supports wired CarPlay, contact your car dealer for assistance.
5.2. Phone Compatibility
Works with iPhone 6 and later models running iOS 10 or later. Optimized for the latest iPhone 15, 16, and 17 series (Pro Max, Plus models).
Not compatible with China Mainland versions of Xiaomi, Huawei, and Honor phones.
5.3. Port Compatibility
Supports both USB-A and USB-C car ports. A USB-A to USB-C converter is included in the package.
6. Setup (Installation)
6.1. Receiver Installation
Insert the wireless CarPlay adapter (receiver) into your vehicle's USB communication port. Ensure the port is the one used for wired CarPlay.

6.2. Camera Installation
The camera offers two fixed mounting methods:
Strap Fixation:
Thread the straps through the mounting plate—one horizontally and one vertically in a cross pattern. Adjust the position of the hook and loop fasteners on the straps to secure the mounting plate to the headrest.

Bracket Fixation:
Open the bracket buckle, clamp it onto the headrest support rod, and select different buckle positions to tighten the support rod.
Install the camera together with the nut into the ball head, adjust to the desired shooting angle, and tighten the nut.
6.3. Camera Power Connection
Power the camera via the provided USB-C power cable. Connect the USB-A end to a suitable USB power source in your car (e.g., a car charger or a car's USB port).

7. Operating Instructions
7.1. Wireless CarPlay Usage
How to connect iPhone:
- Tap the "CarPlay" icon on the product's user interface on your car screen.
- Turn on Bluetooth and Wi-Fi on your iPhone.
- Pair your iPhone with the product via Bluetooth (look for "CARR-XXXX").
- Approve all requests on your iPhone to establish the connection.

Once connected, Wireless CarPlay will start automatically when you enter your car.
How to switch iPhones:
The receiver remembers the last two iPhones and prioritizes the most recently used one. If connection fails, it will attempt to connect to the other iPhone.
- To switch to a different iPhone, go to the Control Center of the currently connected iPhone and turn off its Wi-Fi and Bluetooth.
- After successful disconnection, turn on Bluetooth on the desired iPhone and tap the Bluetooth name of this product ("CARR-XXXX") to pair.
Note: The other iPhone must have Bluetooth and Wi-Fi enabled to connect.
7.2. Camera Usage
The camera view integrates directly into your CarPlay interface. The shortcut bar will auto-hide after 3 seconds of inactivity. Touch the screen or use the knob to show it again.
Full Screen View:
Tap the "Camera" icon on the product's user interface to enter full screen camera mode by default.

Split Screen View:
Toggle the split screen display option on the interface. This allows you to see navigation and the cabin simultaneously (available on supported models).
Double-tap the divider between the CarPlay and Camera interfaces to swap their positions.
Note: Split screen is unavailable when CarPlay is disconnected. Due to CarPlay protocol minimum resolution requirements, if your head unit has low resolution, the CarPlay interface may display abnormally (e.g., icon overlap, incomplete display) during split screen.
Minimized Picture-in-Picture (PiP):
Toggle the Picture-in-Picture display option. You can press and hold the center area of the PiP window to drag it to a different position. Press and hold the bottom-left or bottom-right corner of the PiP window to resize it.
Note: Picture in Picture is unavailable when CarPlay is disconnected.
8. Maintenance
To ensure the longevity and proper functioning of your OTTOCAST Cabin Care device, please adhere to the following maintenance guidelines:
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty and may cause damage.
- Ensure all cables are securely connected and not pinched or strained.
9. Troubleshooting (FAQ & System Updates)
9.1. Frequently Asked Questions (FAQ)
- Q: No response after product installation?
- Check if the vehicle has wired CarPlay (refer to "5.1. Car Compatibility").
- If confirmed, reset the head unit, then connect iPhone to car USB port with original cable to activate wired CarPlay before reinstalling the product.
- Q: Bluetooth/Wi-Fi connected but no CarPlay interface?
- Delete Bluetooth/Wi-Fi pairing records on iPhone, then reconnect iPhone to receiver.
- Q: CarPlay connection failures/frequent disconnections?
- Reset receiver (hold Smart button 10s), clear iPhone Bluetooth/Wi-Fi records, then reconnect.
- If unresolved, update to latest firmware (refer to "9.2. System Update & Issue Reporting").
- If still unresolved, reset head unit, activate wired CarPlay via USB, then reinstall the product.
- Q: Product stops working after normal use?
- Reset head unit, activate wired CarPlay via original USB cable, then reinstall product.
- If unresolved, reset product and reinstall.
9.2. System Update & Issue Reporting
Regularly updating the system ensures optimal performance and resolves potential issues. If issues persist, you can report them to customer service.
Note: The receiver must be powered (connect to a 5V car power supply or use a portable power bank/power adapter) during updates.
Updating with CarPlay Connected (iPhone):
- Enter
http://192.168.1.101in your iPhone's web browser. - If an update is available, tap the "Update" button to begin the process.

Updating when CarPlay is Disconnected (iPhone/Android):
- Long press the receiver's Smart button for 3 seconds until the indicator turns red to enter P2P mode.
- On your iPhone/Android phone, connect to the Wi-Fi network named "CARR-XXXX". The password is "88888888".
- Enter
http://192.168.1.101in your phone's web browser. - If an update is available, tap the "Update" button.
Important: Do not power off during the update. After update completion (LED shows white), replug the receiver. Reconnect your iPhone/Android to use Wireless CarPlay.
Issue Reporting (iPhone/Android):
If issues persist, submit logs from the same web page used for upgrading (http://192.168.1.101).
- Fill out the form with your car brand, model, and year.
- Submit the report.
- Take a screenshot of the successful submission page and send it to OTTOCAST after-sales customer service, including vehicle model/year/failure description/VIN.

10. Specifications
| Attribute | Value |
|---|---|
| Product Name | OTTOCAST Cabin Care Smart Car Adapter with HD Baby Camera |
| Core Feature 1 | Wireless CarPlay Adapter for cars with wired CarPlay |
| Core Feature 2 | Real time HD Baby Monitor and Cabin Camera for backseat |
| Display Type and Interface | Displays on factory car screen via CarPlay No extra screen needed |
| Camera Resolution and Video Quality | 1080P Full HD for clear detailed cabin view |
| Viewing Angle and Lens Angle | 150 Ultra Wide Angle lens to cover entire backseat |
| Night Vision and Low Light Performance | Yes with Infrared IR Night Vision for clear view in darkness |
| Control Mode and How to Control | Via CarPlay Use Siri Voice Control car touchscreen steering wheel buttons or control knob |
| Camera View Mode and Display Mode | One tap switch Split screen view or Minimized picture in picture on CarPlay |
| Connectivity and Processor | Wi Fi 6 and Bluetooth 5.4 Powered by A7 chip for fast stable connection |
| Auto Connection | Auto reconnects in 5 to 10 seconds when you start the car |
| Mounting Type and Installation | Flexible headrest mount for rear facing infants or forward facing toddlers kids setup |
| Car Compatibility and Vehicle Compatibility | Works with most cars with factory Wired Apple CarPlay Not for BMW Tesla or built in Wireless CarPlay cars |
| Compatibility Phones | iPhone 6 and later iOS 10 plus Optimized for iPhone 15 16 17 series Pro Max Plus |
| Port Type and Cable Included | Supports, USB A and USB C ports USB A to C converter included |
| Power Supply and How to Power | Adapter plugs into cars CarPlay USB port, Camera plugs into USB power, cable included |
| Perfect For and Use Case | Parents families new moms Baby monitoring safe driving travel Great gift for baby shower |
11. User Tips
- Easy Installation: Users have noted the product is very easy to install, making setup quick and hassle-free.
- Clear Camera View: The camera provides a very clear view, which is essential for monitoring children in the backseat.
- Check Car Compatibility First: Before purchasing, ensure your car has a factory-installed wired CarPlay system. If you're unsure, connect your iPhone directly to your car's USB port to see if CarPlay activates.
12. Certifications
The OTTOCAST Cabin Care Car Adapter complies with various international standards and certifications, ensuring product quality and safety.

- CE: Conforms to European health, safety, and environmental protection standards.
- FCC: Complies with Part 15 of the FCC Rules for electronic devices.
- K (KC Mark): Korean Certification mark for product safety.
- TELEC: Japanese certification for radio equipment.
- RoHS Compliant: Restricts the use of hazardous substances in electrical and electronic products.
- REACH Compliant: Adheres to European Union regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals.
13. Warranty & Support
OTTOCAST provides a 12-Month Warranty for the Cabin Care Car Adapter, ensuring quality and support for your purchase.
For detailed instructions and further assistance, you can refer to the official user manual PDF:
If you encounter any issues or require technical support, please contact OTTOCAST after-sales customer service with your issue report screenshot (as described in "9.2. System Update & Issue Reporting").
14. Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The product should be kept at least 20CM away from the user when in use.