Motorola APX2000 M2

Contents

Motorola APX 2000 M2 Portable Two-Way Radio User Manual

Model: APX2000 M2 | Brand: Motorola

1. Introduction

The Motorola APX 2000 M2 is a robust and reliable portable two-way radio designed for demanding environments, including public safety and industrial applications. It combines advanced P25 Phase 2 technology with exceptional durability and noise suppression for clear, critical communications. This manual provides essential information for the proper setup, operation, and maintenance of your APX 2000 M2 radio.

2. Product Overview

Familiarize yourself with the components of your APX 2000 M2 radio:

Front view of Motorola APX 2000 M2 radio
Figure 1: Front View
Shows the display, keypad, Push-to-Talk (PTT) button, and speaker.
Top view of Motorola APX 2000 M2 radio
Figure 2: Top View
Features the antenna connector, single multifunction knob (for power/volume/channel), and accessory port.
Side view of Motorola APX 2000 M2 radio
Figure 3: Side View
Displays the multi-pin accessory connector for external devices.
Back view of Motorola APX 2000 M2 radio
Figure 4: Back View
Shows the battery compartment and belt clip attachment points.

3. Setup

3.1 Battery Installation

  1. Align the battery with the guides on the back of the radio.
  2. Slide the battery into place until it clicks securely.
  3. To remove, press the battery release latch (if present) and slide the battery off.

3.2 Charging the Battery

Use only Motorola-approved chargers for your APX 2000 M2 radio. Connect the charger to a power source and place the radio (with battery installed) into the charging tray. The charging indicator will show the charging status. Ensure the battery is fully charged before first use for optimal performance.

3.3 Antenna Attachment

Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.

4. Operation

4.1 Power On/Off and Volume

The single knob on top of the radio controls both power and volume. Rotate the knob clockwise to turn the radio on and increase volume. Rotate counter-clockwise to decrease volume and turn the radio off.

4.2 Channel/Talkgroup Selection

The multifunction knob also allows you to select channels or talkgroups. Rotate the knob to cycle through available options. The display will show the selected channel/talkgroup.

4.3 Transmitting and Receiving

To transmit, press and hold the Push-to-Talk (PTT) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to listen for a response. The radio will automatically receive transmissions when the PTT button is not pressed.

4.4 Emergency Button

The orange emergency button (if configured) is typically located on the top of the radio. Pressing this button can initiate an emergency call or alert, depending on system programming. Refer to your system administrator for specific functionality.

4.5 Programmable Side Buttons

Your radio features programmable side buttons. Their functions are configured by your system administrator and can include features like scan, squelch, or zone selection. Consult your administrator for the specific functions assigned to these buttons.

4.6 Voice Announcement

The radio supports user-programmable voice announcements, providing audible feedback for channel changes or feature activations.

4.7 GPS Functionality

If enabled, the integrated GPS allows for quick location of personnel and assets. This feature operates autonomously or with assistance, providing location data with an accuracy of less than 10 meters (95%).

5. Maintenance

5.1 Cleaning

Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports and connectors are free of dust and debris.

5.2 Battery Care

To maximize battery life, avoid overcharging or fully discharging the battery regularly. Store batteries in a cool, dry place when not in use. Replace batteries when their operating time significantly decreases.

5.3 Water and Dust Resistance

The APX 2000 M2 is IP67 rated, meaning it is protected against dust ingress and can withstand immersion in 1 meter of water for up to 30 minutes. Ensure all covers and accessories are properly sealed to maintain this rating.

6. Troubleshooting

  • Radio not powering on: Check if the battery is properly installed and charged.
  • No audio or distorted audio: Adjust the volume knob. Ensure the antenna is securely attached. Check for obstructions on the speaker or microphone.
  • Cannot transmit or receive: Verify you are on the correct channel/talkgroup. Ensure the PTT button is fully pressed when transmitting. Check for system coverage issues.
  • Display issues: If the display is blank or unreadable, try restarting the radio.

For more detailed troubleshooting, refer to the complete user manual PDF or contact your system administrator.

7. Specifications

7.1 General Specifications

FeatureSpecification
Brand NameMotorola
Model NumberAPX2000 M2
Walkie Talkie TypePortable
Frequency RangeUHF VHF (700/800 MHz, 136-174 MHz, 380-470 MHz, 450-520 MHz)
Output Power (w)3w-5w
Maximum Range5km-10km
Battery Capacity (mAh)2300mAh (Li-Ion IMPRES)
Waterproof / Water-ResistantIP65 (submersible 1 meter, 30 minutes)
MaterialPlastic
DisplayYes (Full bitmap color LCD)
Channel Capacity512
FLASHport Memory64 MB
Operating Temperature-30°C to +60°C
Dimensions (Radio without battery)Length: 133 mm (5.26 in), Width (PTT): 60.2 mm (2.37 in), Depth (PTT): 43.6 mm (1.72 in)
Weight (Radio without battery)260 g (9.17 oz)

7.2 Battery Specifications

Battery TypeCapacityPart Number
Li-Ion IMPRES IP671900 mAhNNTN8128A
Li-Ion IMPRES IP67 Non-FM2300 mAhPMNN4424AR
Li-Ion IMPRES IP67 FM2300 mAhNNTN8129A

7.3 Military Standards (MIL-STD 810 C, D, E, F & G)

The APX 2000 M2 meets various MIL-STD standards for ruggedness, including resistance to low pressure, high/low temperature, temperature shock, solar radiation, rain, humidity, salt fog, blowing dust/sand, vibration, and shock (drop). This ensures reliable operation in harsh conditions.

8. User Tips

  • Regularly check battery charge: Ensure your radio is always ready for use, especially before critical operations.
  • Keep connectors clean: Periodically inspect and clean the accessory connector to ensure reliable connections with external devices.
  • Secure antenna: Always ensure the antenna is tightly secured to maintain optimal signal strength and range.
  • Understand programmable buttons: Familiarize yourself with the functions assigned to your radio's programmable buttons for quick access to features.
  • Use approved accessories: Only use Motorola-approved batteries, chargers, and accessories to ensure compatibility and safety.

9. Warranty and Support

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Motorola Solutions website. For technical support, service, or to discuss customized software packages, contact your authorized Motorola dealer or system administrator.

A comprehensive user manual in PDF format is available for download: Motorola APX 2000 M2 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.