IKSLED AC-7036-T

Contents

IKSLED Material-Penetrating / Recessed Touch Sensor Switch User Manual

Model: AC-7036-T

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your IKSLED Material-Penetrating / Recessed Touch Sensor Switch (Model: AC-7036-T). This innovative switch allows for hidden control of lighting and other compatible loads by sensing touch through non-metallic surfaces such as wood, glass, and acrylic. Please read this manual carefully before installation and use to ensure safe and optimal performance.

Two sizes of the penetrating touch sensor and a hand interacting with a surface.
Figure 1: IKSLED Material-Penetrating Touch Sensor Switch (F47 and F100 models shown).
Hand touching a wooden surface with the sensor installed behind it, demonstrating its hidden application.
Figure 2: Example of the sensor installed behind a wooden panel for hidden control.

2. Important Safety Information

  • HIGH VOLTAGE HAZARD: The sensor cable and internal circuit board carry high voltage (AC100-240V). Always ensure the power supply is disconnected before any installation, removal, or maintenance procedures.
  • DO NOT DISASSEMBLE: Do not attempt to disassemble the sensor housing or directly touch the internal circuit board. This poses a severe electric shock risk and will void the product warranty.
  • PROPER INSTALLATION: Ensure the switch is securely installed before connecting power. Loose connections can lead to malfunction or hazards.
  • COMPATIBLE MATERIALS: This sensor is designed for use with non-metallic materials such as wood boards, glass, and acrylic sheets.
  • INCOMPATIBLE MATERIALS: Do not use on metal or mirror surfaces, or any conductive coatings, as these materials will block the sensor's signal and prevent proper operation.
  • POWER LIMITS: Do not exceed the maximum power rating of 400 Watts. Overloading the switch can cause damage or fire.
  • VOLTAGE MATCH: Ensure the output voltage of the switch matches the input voltage of the connected load.
Warning against disassembling the sensor, showing an opened sensor with a red cross.
Figure 3: Do not disassemble the sensor housing.
Illustrates compatible materials (wood boards, glass, acrylic sheets) and warns against metal/mirrors.
Figure 4: Compatible materials for sensor installation.

3. Specifications

Attribute Value
Product Name Penetrating touch sensor
Model Number AC-7036-T (F47, F100)
Brand Name IKSLED
Switch Type Touch On/Off Switch
Material Plastic
Input Voltage AC100-240V 50/60Hz
Output Voltage AC100-240V
Max Power 400 Watt
Penetration Thickness (F47) ≤ 3CM
Penetration Thickness (F100) ≤ 5CM
Operating Mode A Touch to turn on, on release to turn off.
Operating Mode B Touch to turn on and again to turn off.
Certifications RoHS, EMC, CE
Warranty 1 year
Origin Mainland China
Product parameters list including input voltage, output voltage, penetration thickness, and operating modes.
Figure 5: Detailed product parameters.
F47 sensor with a visual indicator of 3cm penetration thickness.
Figure 6: F47 model with a maximum penetration thickness of 3cm.
F100 sensor with a visual indicator of 5cm penetration thickness.
Figure 7: F100 model with a maximum penetration thickness of 5cm.

4. Setup and Installation

Follow these steps carefully to install your touch sensor switch. Ensure all power is disconnected before beginning installation.

4.1 Physical Installation of the Sensor

  1. Identify the white part on the back of the sensor as double-sided tape.
  2. Peel off the protective backing from the double-sided tape.
  3. Stick the sensor firmly onto the desired non-metallic surface (e.g., wooden board, glass, acrylic sheet) where you want the touch control to be active. Ensure the surface is clean and dry for optimal adhesion.
Three steps showing how to install the sensor: 1. Identify double-sided tape, 2. Peel off tape, 3. Stick on wooden board.
Figure 8: Sensor physical installation steps.

4.2 Electrical Connection

Refer to the connection diagram below for proper wiring. It is crucial to disconnect power before making any electrical connections.

Wiring diagram for the AC Sensor Control Switch, showing connections for input voltage, output to lamps (100-240V, 12V/24V with adapter, and AC1100-240V load).
Figure 9: Connection Diagram for AC Sensor Control Switch (Model: AC-7036-T).
  • Connect the Live (L) and Neutral (N) input wires from your AC100-240V power supply to the "L In" and "N In" terminals on the control switch, respectively.
  • Connect the Live (L) and Neutral (N) output wires from the control switch's "L Out" and "N Out" terminals to your load (e.g., LED lamp, exhaust fan).
  • For 12V/24V lamps, a constant voltage adapter (DC12V-24V) must be used between the switch output and the lamp. Ensure the adapter's input is connected to the switch's output and the adapter's output is connected to the 12V/24V lamp.
  • Ensure all connections are secure and insulated.
  • Once all connections are made and secured, you may reconnect the main power supply.

4.3 Installation Demonstration Video

Watch this video for a visual guide on the installation process and how to test the different operating modes.

Video 1: Installation and demonstration of the touch sensor switch.

5. Operating Instructions

The AC-7036-T touch sensor switch supports two operating modes:

5.1 Mode A: Momentary Touch

In Mode A, the connected load will turn ON when you touch the sensing surface and turn OFF immediately when you release your touch. This mode is suitable for applications where you need temporary activation.

Hand touching a surface, with text 'MODE A: Touch to turn on, on release to turn off. Light on when touched. Off immediately when released.'
Figure 10: Operation in Mode A.

5.2 Mode B: Toggle Touch

In Mode B, the connected load will turn ON with the first touch to the sensing surface and remain ON. A second touch will turn the load OFF. This mode functions as a standard toggle switch.

Hand tapping a surface, with text 'MODE B: Tap to turn on/off. Touch to turn on and again to turn off. No dimming function.'
Figure 11: Operation in Mode B.

6. Maintenance

  • Keep the sensing surface clean and free from dust or debris to ensure consistent performance.
  • Do not use abrasive cleaners or solvents on the sensor or sensing surface.
  • Regularly check electrical connections for any signs of wear or damage. Disconnect power before inspection.
  • As stated in the safety section, never attempt to open or repair the sensor unit yourself.

7. Troubleshooting

Problem Possible Cause Solution
Switch does not respond to touch.
  • Power is not connected or is off.
  • Incorrect wiring.
  • Sensor installed on incompatible material (metal/mirror).
  • Material thickness exceeds sensor's penetration limit.
  • Sensor is loose or improperly adhered.
  • Check power supply and ensure it's ON.
  • Verify wiring against the connection diagram (Figure 9).
  • Relocate sensor to a compatible non-metallic surface.
  • Ensure material thickness is within limits (F47 ≤ 3CM, F100 ≤ 5CM). For example, a 5mm plywood might be too thick for the F47 model.
  • Re-secure the sensor to the surface.
Load does not turn ON/OFF correctly.
  • Load power exceeds 400W.
  • Output voltage mismatch with load.
  • Faulty load or wiring to load.
  • Ensure total load does not exceed 400W.
  • Confirm load's input voltage matches switch's output voltage.
  • Test the load independently or inspect its wiring.
Sensor is overly sensitive or not sensitive enough.
  • Environmental interference.
  • Sensor placement.
  • Ensure no other electronic devices are causing interference near the sensor.
  • Adjust sensor placement slightly to optimize sensitivity.

8. User Tips

  • For optimal performance, choose a mounting surface that is consistently flat and within the specified penetration thickness for your sensor model (F47 for ≤3CM, F100 for ≤5CM).
  • When installing, ensure the sensor is firmly adhered to prevent movement, which could affect touch detection.
  • If using with thicker materials, consider the F100 model for better reliability.
  • Always double-check wiring before applying power to avoid damage to the switch or connected devices.

9. Warranty and Support

The IKSLED Material-Penetrating / Recessed Touch Sensor Switch comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, unauthorized repairs, or exceeding the specified power limits.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your model number (AC-7036-T) and proof of purchase ready.

A detailed user manual in PDF format is also available for download. You can find it by searching for "IKSLED AC-7036-T User Manual PDF" online or by visiting the product page where you purchased this item.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.