1. Product Overview
The LAUNCH CRP919 EV is a state-of-the-art diagnostic tool specifically designed for new energy vehicles, including electric vehicles (EVs). It offers comprehensive OE-level diagnostics, advanced ECU coding, bi-directional control (active tests), and a wide range of special functions. This tool supports CAN FD and DoIP protocols, ensuring compatibility with the latest vehicle models.
2. Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the tool, please read this user's manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:
- This product is not a toy. Do not allow children to play with or near this item.
- Do not expose the device to rain or wet conditions.
- Do not place the device on any unstable surface.
- Never leave the device unattended during charging process. The device must be placed on a non-flammable surface during charging.
- Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
- Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
- Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
- People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
- Always perform automotive testing in a safe environment.
- Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
- Wear safety eye protection that meets ANSI standards.
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
- Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
- Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
- Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
- Caution: This tool contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
3. Setup
3.1 Charging the Tool
The CRP919 EV can be charged using two methods:
- Via Charging Cable & Power Adaptor: Plug one end of the included charging cable into the DC-IN port of the tool, and the other end to the external DC power.
- Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end to the vehicle's DLC.
Once the charging LED illuminates solid green, it indicates that the battery is fully charged.
Note: Attempting to charge the tool via OBD diagnostic port will consume the vehicle's battery power. It is not recommended to charge the tool in this way except for OBD diagnosis operations.
3.2 Turning On/Off
- To Turn On: Press the power button for about 3 seconds.
- To Turn Off: Press the power button for about 8 seconds.
3.3 Initial Setup (First Use)
If this is your first time using the tool, you will need to perform some system settings:
- Power on the tool. The screen will display a welcome page. Tap "Welcome to use" to proceed.
- Choose your desired system language, and tap "Next step".
- Choose your desired time zone, and tap "Next step" to enter the WLAN setup screen.
- Slide the WLAN switch to ON. The system will search for available wireless LANs. Choose your desired WLAN access point/network.
- If the network is open, you can connect directly. If encrypted, enter the security key (network password).
- After network connection, tap "Next Step" to configure workshop information. Input the required information, and tap "Next Step".
- Carefully read all terms and conditions of the user agreement, check the box before "Agree to all the above terms", and tap "OK" to finish the sign-up process and navigate to the Job Menu.
Note: If you choose "Ignore" in WLAN setup, it will go into the date setting page. If the tool has been properly connected to the Internet, the system will automatically obtain the correct network date and time and navigate to step 5. After configuration, the system will append the workshop information to every report generated.
3.4 Connecting to the Vehicle
- Turn the vehicle's ignition off.
- Locate the vehicle's 16-pin Data Link Connector (DLC). This is typically located under the hood, by the radiator, or under/around the driver's side of the instrument panel. Refer to your vehicle's service manual if needed.
- Plug one end of the diagnostic cable into the vehicle's DLC port, and the other end into the DB-15 diagnostic connector of the tool. Tighten the captive screws.
- Turn the vehicle's ignition on. The engine can be off or running.
Note: A plastic DLC cover may be found on some vehicles and needs to be removed before plugging the diagnostic cable. The cable connector is keyed and will only fit one way. If you have problems connecting, rotate the connector 180 degrees and try again.
4. Operating the Tool
4.1 Job Menu Overview
The main menu screen provides access to the following function modules:
- Local Diagnose: Configures the tool as a professional diagnostic tool.
- Service Function: Offers coding, reset, relearn, and other service functions.
- Upgrade: Updates vehicle diagnostic software and APK.
- Mall: Subscribes to extra vehicle diagnostic software or reset software.
- Know Your Customer: Assists repair shops with business analysis, customer management, and diagnosis statistics.
- Mine: Checks saved reports, order information, and allows system settings.
- Toolbox: Provides practical add-on modules like battery voltage, diagnostic software clear, firmware fix, DTC library, diagnostic record, and DLC lookup.
- More: Includes Online support and LAUNCH Academy.
4.2 Performing System Diagnostics
This function is designed to diagnose electronic control systems of a single vehicle model.
4.2.1 Smart Diagnosis (Auto-Detect)
This function quickly accesses the vehicle's electronic control systems by decoding the VIN, eliminating manual menu selection.
- Power on the tool. Ensure "Automatic detection on connect" is enabled in Mine > Settings.
- After connecting the tool to the vehicle, turn the ignition key on. The system will enter auto-detect mode.
- Once the VIN is successfully obtained, a screen displaying vehicle information (Year, Make, Model) will appear. Tap "OK" to start diagnosing all available systems.
- A diagnostic report will be automatically generated upon completion.
Note: A stable network connection is recommended for successful VIN access. If auto-detect fails, try connecting to the network. Not all cars support Auto-Detect due to manufacturer settings.
4.2.2 Manual Diagnosis
If the tool cannot obtain VIN information automatically, you can perform manual diagnosis by selecting the vehicle model and system manually.
- From the Job Menu, tap "Local Diagnose" then "AutoDetect" (if "Automatic detection on connect" is Off).
- Select the diagnostic software version (e.g., V15.54). Tap "OK".
- Select the test vehicle manufacturer (e.g., TOYOTA).
- Select the desired test item (e.g., Health Report, System Scan, System Selection).
Note: Before diagnosing, ensure the diagnostic program for the specific vehicle model is installed. Diagnostic menus may vary between manufacturers.
4.2.3 Battery Pack Detection
This function detects the battery pack of new energy vehicles. You can select the battery pack either by brand or by vehicle model.
- From the Job Menu, tap "Local Diagnose".
- Select "New Energy" then "Battery pack detection".
- Switch to "Automotive" and select the desired brand (e.g., BYD).
- Select the specific model (e.g., HAN EV).
- Select the corresponding option based on the nameplate of the car (e.g., BMS.model BYD7009BEV1,TZ200XSC,569.6V,135Ah).
- The tool will initialize communication and display battery pack information, voltage details, and temperature details.
- You can view data in full screen or generate a report.
4.2.4 OBD II Diagnosis
This option provides a quick way to check for Diagnostic Trouble Codes (DTCs), isolate the cause of the Malfunction Indicator Lamp (MIL), check monitor status, and verify repairs.
- After connecting the tool to the vehicle's DLC, tap "OBD II" in the Diagnose main menu.
- The tool will automatically check the vehicle's computer for the communication protocol and display the Monitor Status.
- Tap "OK" to enter the diagnostic test modes selection screen.
OBD II Diagnostic Trouble Codes (DTCs) consist of a five-digit alphanumeric code:
- 1st character: A letter (B, C, P or U) identifies the main system (Body, Chassis, Powertrain, or Network).
- 2nd character: A numeric digit (0 thru 3) identifies the type of code (Generic or Manufacturer-Specific).
- 3rd character: A letter or numeric digit (0 thru 9, A thru F) identifies the specific system or sub-system.
- 4th and 5th characters: Letters or numeric digits (0 thru 9, A thru F) identify the section of the system that is malfunctioning.
Note: Generic DTCs are codes used by all vehicle manufacturers, while Manufacturer-Specific DTCs are controlled by vehicle manufacturers.
4.2.5 Read Fault Code
This function displays detailed information of DTC records retrieved from the vehicle's control system. Tap "Read Fault Code" on the test function selection screen to view diagnostic results.
Note: Retrieving DTCs is only one part of diagnosis. Never replace parts based solely on DTCs without consulting the vehicle's service manual for proper testing procedures.
4.2.6 Clear Fault Code
After reading codes and performing repairs, use this function to erase codes from the vehicle. Ensure the ignition key is in the ON position with the engine off before clearing codes.
Note: Clearing DTCs does not fix the problem. If proper repairs are not made, codes will reappear.
4.2.7 Read Data Stream
This option retrieves and displays live data and parameters from the vehicle's ECU. Tap "Read Data Stream" on the test function selection screen to view data stream items.
There are three display modes:
- Value (default): Displays parameters with numbers and lists.
- Graph: Displays parameters with waveform graphs.
- Combine: Merges graphs for data comparison (Max 8 values).
4.2.8 Actuation Test (Bi-directional Control)
This option accesses vehicle-specific subsystem and component tests. The tool outputs commands to the ECU to drive actuators and determines system integrity by reading ECU data or monitoring actuator operation.
4.2.9 ECU Coding
This function allows you to customize car settings by refreshing ECUs. This includes:
- Uncovering hidden or disabled functions (e.g., flash headlights when alarm, change dashboard brightness).
- Making general models deluxe.
- Pairing, learning, and coding new ECUs.
4.3 Special Functions (43+ Hot Services)
The CRP919 EV offers over 43 special functions for quick and effective repairs, including but not limited to:
- Oil Reset
- Throttle Adaptation
- SAS (Steering Angle Sensor) Reset
- E-P-B (Electronic Parking Brake) Reset
- TPMS (Tire Pressure Monitoring System) Reset
- ABS Bleeding
- BMS (Battery Management System) Reset
- Injector Coding
- ECU Reset
- Adaptive Headlights
- Gearbox Matching
- E-G-R (Exhaust Gas Recirculation) Reset
- Tooth Learning
- Suspension Calibration
- Coolant Change (EV)
- HV Disconnection (EV)
- HV Battery Check
4.4 Other Modules
- TPMS (Tire Pressure Monitoring System): Configures the tablet as a professional TPMS activation & diagnostic tool. Requires compatible TPMS activation & programming tool (sold separately).
- Camera: Allows taking pictures with the device camera.
- Remote Assistance: Enables remote support from technicians or colleagues via TeamViewer software.
- BST (Battery Tester): Facilitates faster and easier battery detection. Requires a specific Bluetooth battery tester (sold separately).
5. Maintenance
5.1 Software Update (Upgrade)
To ensure your tool has the latest features and vehicle coverage, regular software updates are recommended. The CRP919 EV comes with 2 years of free software upgrades.
- Tap "Upgrade" on the Job Menu to enter the update center.
- By default, all diagnostic software is selected. To deselect, tap "Unselect" and uncheck the box next to the vehicle model.
- Tap "Update" to start downloading. This may take several minutes.
- If network connection fails, tap "Retry".
- Once downloaded, software packages will install automatically.
Note: This function requires a stable network connection. The free subscription for default software needs to be renewed after expiration. New diagnostic software and versions are restricted without a valid subscription.
5.2 Clean Up
This option allows you to clear cache files and free up storage space. After cleanup, the tool will reboot automatically.
5.3 Recovery
Use this option to reset the tool to its default factory settings.
Warning: Resetting may cause data loss. Please back up important data before performing this operation.
6. Troubleshooting
6.1 Diagnostic Trouble Codes (DTCs)
DTCs are codes stored by the on-board computer system indicating a problem. They guide you to the fault area. Always consult the vehicle's service manual for proper testing procedures before replacing parts based solely on DTCs.
6.2 Diagnostic Feedback
This module allows you to send feedback regarding your diagnostic problems to LAUNCH for further analysis and troubleshooting.
6.3 FAQ
This module lists frequently asked questions and answers related to the tool. Consult this section for common issues and solutions.
7. Specifications
| Feature | Specification |
|---|---|
| Screen Size | 7 inch touch screen |
| Display Resolution | 1024*600 |
| Operating System | Android 10.0 |
| Processor | 4-Core Processor, 2.0 GHz |
| RAM/ROM | 4GB/64GB |
| Battery | 6000 mAh |
| Item Weight | <950g |
| OBDII Input Voltage | 9~18V |
| Connection | OBD II, Typ-C, Wifi |
| Working Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
| Dimensions (L x W x H) | 251.4mm x 150.6mm x 40.4mm |
| Package Dimensions (L x W x H) | 33cm x 26cm x 13cm |
| Package Weight | 2.9 kg |
| Free Update | 2 Years |
| Warranty | 5 Years |
| External Testing Certification | CE |
7.1 Accessories Checklist
- Diagnostic tool x 1
- OBD II diagnostic cable x 1
- DC 5V charging cable x 1
- Power adaptor x 1
- Multilingual quick start guide x 1
- User manual x 1
- Carrying Case x 1
- US Adapter (if applicable)
- UK Adapter (if applicable)
- EU Adapter (if applicable)
8. User Tips
- Always ensure the tool's software is up-to-date for the best performance and widest vehicle compatibility.
- When performing battery pack detection, carefully select the correct vehicle model and battery specifications to ensure accurate readings.
- Utilize the 'Report' function after diagnostics to save and share detailed vehicle health information.
- For complex issues, consider using the 'Remote Assistance' feature to get expert help.
- Explore the 'ECU Coding' features to customize your vehicle's settings and unlock hidden functionalities.
9. Warranty and Support
9.1 Warranty Information
LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is limited to persons who purchase LAUNCH products for resale or use in the ordinary course of business.
The warranty does not cover parts that have been abused, altered, used for a purpose other than intended, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.
Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.
9.2 Customer Service
If you have any questions during the operation of the unit, please contact the Seller or LAUNCH TECH Service Center.
- Website: https://en.cnlaunch.com
- Phone: +86 755 8455 7891
- Email: overseas.service@cnlaunch.com
Statement: LAUNCH reserves the right to make any change to this manual without notice. We have tried our best to make the descriptions and illustrations in the manual as accurate as possible, and defects are inevitable. If you have any questions, please contact your local dealer or LAUNCH TECH CO., LTD. LAUNCH does not bear any responsibility arising from misunderstandings.
10. Compliance Information
10.1 FCC ID: XUJOCP349P702 / IC: 29886-OCP349P702
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
The device for operation in the band 5150-5250MHz is only for indoor use.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
10.2 RF Exposure Information and Statement
This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
The SAR limit is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. This device was tested for typical body-worn operations 0mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body.
This device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restriction.