1. Introduction
Thank you for choosing our Plug-in Night Light. This device is designed to provide soft, energy-efficient illumination in your home, automatically adjusting to ambient light conditions. Please read this manual carefully before use to ensure proper operation and longevity of your night light.
2. Package Contents
Your package should contain:
- 1 x Plug-in Night Light (or 2, depending on pack size)
- 1 x User Manual (this document)
3. Product Overview
Familiarize yourself with the components of your night light:

The diagram highlights the Photocell Light Control Sensor at the top, the Lighting Mode Switch on the side, and the Dimming Button on the front. Dimensions are approximately 93mm (Height), 64mm (Width), and 62mm (Depth).
- Photocell Light Control Sensor: Detects ambient light levels to automatically turn the light on or off in AUTO mode.
- Lighting Mode Switch: Located on the side, allows selection between AUTO, ON, and OFF modes.
- Dimming Button: Located on the front, used to adjust brightness levels.
- LED Light Panel: Emits warm white light.
4. Setup and Installation
The night light is designed for simple plug-and-play installation.
- Unpack: Carefully remove the night light from its packaging.
- Select Location: Choose an indoor standard wall outlet. Ideal locations include hallways, stairways, bedrooms, living rooms, kitchens, bathrooms, cabinets, dark rooms, basements, garages, or cellars.
- Installation Height: For optimal performance of the light sensor, install the night light at a height between 45cm and 155cm from the floor.
- Plug In: Insert the night light directly into a standard wall socket. Ensure the plug type matches your region (US, UK, AU, EU).

Figure 2: Compatible Plug Types
Ensure your night light's plug matches your country's standard. - Avoid Obstructions: Do not place the night light where the sensor is covered or obstructed, or in areas with direct strong light sources that might interfere with its automatic function.
5. Operating Instructions
Your night light offers three operating modes and adjustable brightness.
5.1. Selecting Operating Mode
Use the Lighting Mode Switch on the side of the device to select your desired mode:

Choose between ON, AUTO, or OFF using the side switch.
- AUTO Mode (Ambient Light Sensing): The night light will automatically turn on when the ambient light is low (darkness) and turn off when sufficient light is detected (daylight). This mode is energy-saving.

Figure 4: AUTO Mode Operation
Automatic activation in darkness and deactivation in daylight. - ON Mode (Continuous Lighting): The night light will stay on continuously, regardless of ambient light conditions.
- OFF Mode (Deactivate Illumination): The night light will remain off.
5.2. Adjusting Brightness
The night light features 5 adjustable brightness levels and infinite dimming.

Short press for preset levels, long press for stepless dimming.
- Short Press: Briefly press the Dimming Button to cycle through preset brightness levels: High, Middle, Low.
- Long Press: Press and hold the Dimming Button to infinitely dim the light from its current level to the lowest or highest setting. Release the button when the desired brightness is reached. The brightness levels range from 20% to 100% (approximately 1LM to 30LM).

Visual representation of brightness levels from 20% to 100%.
5.3. Product Demonstration Video
Watch this video for a visual guide on how to use your night light:
Video 1: Product Features and Usage Demonstration
This video showcases the night light's automatic functions, brightness adjustments, and various applications in a home environment.
6. Maintenance and Care
- Cleaning: Unplug the night light from the wall socket before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Storage: If not in use for an extended period, unplug the device and store it in a cool, dry place.
- Operating Environment: Ensure the working environment temperature is between -5°C and 50°C. Temperatures outside this range may affect performance. Avoid placing the device in wet areas or locations with extreme temperature changes.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Night light does not turn on in AUTO mode when dark. | 1. Ambient light is too bright. 2. Sensor is obstructed. 3. Device is not properly plugged in. | 1. Ensure the room is sufficiently dark. 2. Check that the photocell sensor is clear of obstructions. 3. Re-plug the device firmly into the socket. |
| Night light stays on during the day in AUTO mode. | 1. Ambient light is insufficient. 2. Sensor is covered. | 1. Ensure the room has enough natural or artificial light. 2. Clear any obstructions from the photocell sensor. |
| Light flickers or does not respond to brightness adjustment. | 1. Unstable power supply. 2. Device malfunction. | 1. Try plugging the night light into a different outlet. 2. If the problem persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Dusk to Dawn LED Night Light |
| Working Voltage | AC100-240V |
| Power Consumption | 0.7W (0.3W as per description) |
| LED Quantity | 2 pcs |
| LED Lifespan | Up to 100,000 hours (60,000 hours as per description) |
| Color Temperature | 2500-2700K (Warm White) |
| Brightness | Up to 30LM (5 adjustable levels) |
| Photosensitive Sensor | GL5528, optical spectrum 540NM |
| Product Dimensions | 43mm x 43mm x 98.63mm (approx. 93mm H x 64mm W x 62mm D) |
| Product Weight | 49g |
| Material | ABS plastic & PC (Fire-Resistant) |
| Working Environment Temp. | -5°C to 50°C |
| Installation Height | 45cm - 155cm |
| Certifications | CE, EMC, FCC, LVD, PSE, ROHS |
9. User Tips
- For bedrooms, many users find the lowest brightness settings (20-40%) sufficient for gentle illumination without disturbing sleep.
- In hallways or stairwells, a medium to high brightness (60-100%) can provide better visibility for safety.
- The AUTO mode is highly recommended for energy efficiency, as it ensures the light is only on when needed.
- Consider placing night lights in multiple areas for a consistent, soft glow throughout your home during nighttime hours.
10. Warranty and Support
For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty-related inquiries.