1. Introduction
The THINKCAR VENU 90 is a professional Tire Pressure Monitoring System (TPMS) diagnostic tool designed for comprehensive tire system maintenance and basic On-Board Diagnostics (OBD2) functions. This device integrates sensor activation, programming, learning, and full OBD2 diagnostic capabilities, making it an essential tool for automotive professionals and enthusiasts.
Key Features:
- Cost-Effective: Unlimited programming capabilities reduce the need for frequent sensor replacements.
- Time-Saving: All-in-one TPMS functions eliminate the need for multiple tools.
- Future-Proof: Free lifetime WiFi updates ensure compatibility with new vehicle models and software enhancements.
- Reliable: Manufactured by THINKCAR TECH CO., LTD., a professional automotive diagnostic tool provider.
- User-Friendly: Features an intuitive interface that requires no specialized training.
2. Product Overview
The THINKCAR VENU 90 is a handheld device with a color display and an integrated OBD-II connector cable. It operates independently without requiring a separate mobile application.

Figure 2.1: THINKCAR VENU 90 Device and Packaging
2.1 Device Components and Functions

Figure 2.2: THINKCAR VENU 90 Application Scenarios (Sensor Replacement, Tire Rotation, OEM Inspection, Sensor Detection)
| No. | Name | Function |
|---|---|---|
| 1 | On/Key | Long press to turn on/off the device. |
| 2 | Activation key | Press to activate the tire pressure sensor. |
| 3 | Return key | Return to previous level. |
| 4 | OK Ok key | Confirmation button is pressed to go to the next step. |
| 5 | Flip-up key | Switch tires or turn pages upwards. |
| 6 | Flip down key | Switch tires down or turn the page. |
| 7 | Flip left Key | Switch tires to the left or turn the page. |
| 8 | Flip right Key | Switch tires to the right or turn the page. |
| 9 | Charging port | TYPE-C charging port and development system debug USB port. |
| 10 | SD card slot | SD card storage. |
3. Setup
3.1 Initial Power On
- Long press the On/Key button (No. 1 in Table 2.1) to power on the device.
- The device will vibrate briefly, display a boot animation, and then enter the main boot interface.
3.2 Wi-Fi Connection
Connecting to Wi-Fi is essential for software updates.
- From the main menu, navigate to [Set Up].
- Select [WiFi Upgrade].
- The device will scan for available Wi-Fi networks and display a [WIFI List].
- Select your desired Wi-Fi network from the list.
- Use the navigation keys (Flip-up, Flip down, Flip left, Flip right) to enter the Wi-Fi password.
- Press the activation button to connect.
3.3 Software Update
The VENU 90 supports lifetime free updates via Wi-Fi or SD card.
3.3.1 Wi-Fi Upgrade Method
- Ensure the device is connected to Wi-Fi (see 3.2 Wi-Fi Connection).
- From the main menu, navigate to [Set Up].
- Select [WiFi Upgrade].
- The system will automatically compare the current version with the latest available version.
- If an update is available, follow the on-screen prompts to proceed. Press OK to start the download.
- The device will automatically reboot after the update is complete.
3.3.2 SD Card Upgrade Method
- Power off the device.
- Carefully remove the SD card from the SD card slot (No. 10 in Table 2.1).
- Insert the SD card into a computer's SD card reader.
- Visit the official THINKCAR website: https://mythinkcar.com.
- Download the latest THINKCAR tire pressure tool upgrade package for VENU 90.
- Copy the downloaded upgrade files to the SD card.
- Safely eject the SD card from your computer and reinsert it into the VENU 90's SD card slot.
- Power on the device. The system should detect the new software and prompt you to update. Follow the on-screen instructions.

Figure 3.1: Wi-Fi and SD Card Upgrade Methods
4. Operating Instructions
4.1 TPMS System Functions
The TPMS system menu allows you to perform various operations related to tire pressure sensors.

Figure 4.1: TPMS Diagnostic Screen showing sensor programming and reset options.
4.1.1 Check Sensor (Activation)
This function activates the TPMS sensor in the tire to read its data.
- From the TPMS menu, select [CHECK SENSOR].
- Follow the on-screen prompts to select the vehicle model and tire position.
- Press the Activation key (No. 2 in Table 2.1) to activate the sensor.
- The device will display the tire's pressure, temperature, and ID information upon successful activation.

Figure 4.2: Sensor Activation Process showing sensor frequency, position, ID, and tire pressure.
4.1.2 Program Sensor
This function allows you to program new THINKCAR sensors. Note: This TPMS programming function only works with THINKCAR sensors (e.g., S3, S2 sensors).

Figure 4.3: Sensor Programming Screen with various programming options.
- From the TPMS menu, select [PROGRAM SENSOR].
- Choose one of the following programming methods:
- Create Sensor: The system automatically generates a new sensor ID. Place the THINKCAR sensor in the designated area on top of the device for programming.
- Manual Input: If you have the original sensor ID, you can manually enter it.
- Copy ID by Activate: Activate the original sensor to read its ID, then copy this ID to the new THINKCAR sensor.
- Copy ID by OBD: Connect the device to the vehicle's OBD port to read sensor data from the ECU, then copy this data to the new THINKCAR sensor.
- Create Multi-Sensor (1-12): Program up to 12 THINKCAR sensors simultaneously. Place sensors within 10cm of the device.
4.1.3 Relearn Procedure
After replacing or programming a TPMS sensor, the vehicle's ECU needs to learn the new sensor IDs.
- From the TPMS menu, select [RELEARN PROCEDURE].
- The device will display the vehicle's specific learning method (e.g., Automatic, OBD Relearn).
- Follow the on-screen instructions to complete the relearn process. This may involve driving the vehicle, connecting to the OBD port, or activating sensors.
4.1.4 TPMS OBDII
This function provides OBD-related diagnostics for the TPMS system.
- Read ID: Reads sensor IDs stored in the vehicle's ECU.
- Read Code: Reads TPMS-related diagnostic trouble codes (DTCs).
- Erase Code: Clears TPMS-related DTCs.
4.1.5 OE Sensor Info
Access this feature to view factory sensor information for Original Equipment (OE) sensors.
4.2 OBD Detection Functions
The VENU 90 supports full OBD2 functions for diagnosing engine-related issues.

Figure 4.4: Full OBD2 Functions Menu
To use OBD functions, connect the VENU 90's OBD-II connector to your vehicle's OBD-II port. The port is typically located under the dashboard on the driver's side. You can find its exact location in [Set Up] > [DLC location information].
- Read Codes: Reads current, pending, and permanent Diagnostic Trouble Codes (DTCs) from the vehicle's ECU.
- Erase Codes: Clears DTCs and turns off the Check Engine Light (MIL).
- I/M Readiness: Checks the readiness of emission-related monitors, useful for emission testing.
- Data Stream: Displays real-time live data parameters from the vehicle's sensors and modules.
- Freeze Frame: Captures a snapshot of vehicle operating conditions at the moment an emission-related fault is detected.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-Board Monitoring: Views results of on-board diagnostic monitoring tests for specific components/systems.
- EVAP System Test: Initiates a test of the evaporative emission control system.
- Vehicle Information: Displays vehicle identification number (VIN), calibration ID (CID), and calibration verification number (CVN).
4.3 Key Frequency Check
This function allows you to check the frequency of a vehicle's key fob.
- From the main menu, navigate to [Set Up].
- Select [Key Frequency].
- Hold the key fob near the device and press a button on the fob. The device will display the detected frequency.
5. Maintenance
Regular maintenance of your THINKCAR VENU 90 primarily involves keeping its software updated to ensure compatibility with the latest vehicle models and optimal performance. Refer to Section 3.3 Software Update for detailed instructions on Wi-Fi and SD card update methods.
6. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect the device to a power source using the Type-C USB cable.
- Wi-Fi connection issues: Double-check the Wi-Fi password. Ensure the device is within range of the Wi-Fi signal.
- Software update failure: Ensure a stable internet connection for Wi-Fi updates. For SD card updates, ensure files are correctly placed on the card and the card is properly inserted.
- Sensor not activating: Ensure the sensor is functional and within range of the device. Check if the sensor frequency (315MHz/433MHz) matches the device's capability.
- Sensor programming failure: Ensure you are using THINKCAR brand sensors for programming. Verify the sensor is correctly placed on the device.
- OBD connection error: Ensure the OBD-II cable is securely connected to both the device and the vehicle's OBD-II port. Verify the vehicle's ignition is on.
- DTCs not clearing: Ensure the underlying issue causing the DTCs has been resolved. DTCs will reappear if the fault persists.
7. Specifications
| Parameter | Value |
|---|---|
| Model | VENU 90 |
| Display | 2.8 inches |
| Resolution | 320*240 pixels |
| Wi-Fi | Wi-Fi upgrade |
| USB Interface | Type C |
| Diagnostic Port | OBDII-16 pins |
| Battery | 3000mAh/3.8V |
| Working Temperature | -10℃~50℃ |
| Size | 205*89*33.5mm |
| Weight | 420g |
| Product Certification | CE, FCC, IC, ROHS, CP65 |
| Battery Certification | MSDS, UN38.3 |

Figure 7.1: THINKCAR VENU 90 Specifications
8. User Tips
- Always ensure your device software is up-to-date for the best compatibility and functionality with newer vehicle models.
- When programming sensors, double-check that you are using THINKCAR brand sensors, as the programming function is exclusive to them.
- For OBD-II diagnostics, ensure the vehicle's ignition is in the 'ON' position (engine off) unless otherwise specified by a particular test.
- Keep the device charged, especially before performing critical diagnostic or programming tasks, to avoid interruptions.
9. Warranty and Support
9.1 Warranty Terms
This warranty applies to users and distributors who purchase THINKCAR products through normal procedures. THINKCAR TECH provides a free warranty for one year from the date of purchase. This warranty covers damages caused by defects in materials or workmanship.
Exclusions: Damages to the equipment or components caused by abuse, unauthorized modification, use for non-designed purposes, or operational manners not specified in the instructions are not covered by this warranty. Compensation for dashboard damage caused by equipment defects is limited to repair or replacement. THINKCAR TECH does not bear any indirect or incidental losses.
9.2 Support Information
- Service Line: 1-909-757-1959
- Customer Service Email: support@thinkcar.com
- Official Website: www.thinkcar.com (Product tutorials, videos, FAQ, and coverage lists are available here.)
- Follow us on:
Facebook: @thinkcar.official
Twitter: @ObdThinkcar
10. Packing List
The THINKCAR VENU 90 package includes the following items:
- THINKCAR VENU 90 Diagnostic Tool
- User Manual (Quick Start Guide)
- USB Type-C Cable
- Retail Packaging Box

Figure 10.1: THINKCAR VENU 90 Packing List Contents