MEUYAG 1080P Retro Digital Camera

Contents

MEUYAG 1080P Retro Digital Mini Camera

Instruction Manual

1. Introduction

Thank you for purchasing the MEUYAG 1080P Retro Digital Mini Camera. This compact and stylish device allows you to capture high-definition photos and videos with ease. This manual provides essential information on how to set up, operate, and maintain your camera to ensure optimal performance.

2. Safety Information

⚠️ Disclaimer:

Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. Package Contents

Please check the package for the following items:

  • MEUYAG 1080P Retro Digital Mini Camera
  • USB Charging Cable
  • Lanyard (may be pre-attached or included separately)
  • User Manual (this document)

Note: A MicroSD/TF card is required for storing photos and videos and may not be included depending on your purchase bundle.

4. Product Overview

Familiarize yourself with the camera's components:

Mini Camera Diagram

Figure 1: Mini Camera Components Diagram

  • Horn hole: Speaker output.
  • Lens: Camera lens.
  • Flashlight: LED flash for low-light conditions.
  • MIC: Microphone for audio recording.
  • Power button: On/Off and function confirmation.
  • Charging port: USB port for charging.
  • Charging indicator light: Shows charging status.
  • Reset hole: For factory reset (use a thin pin).
  • TF card slot: For MicroSD/TF memory card.
  • Display: 0.96-inch IPS color screen.
  • Lanyard: Attachment point for carrying strap.
  • Up / Mode key: Navigation up, mode switching.
  • Lower / Filter switch: Navigation down, filter switching.

5. Setup

5.1. Charging the Camera

Before first use, fully charge the camera:

  1. Connect the camera to a USB power source (e.g., computer, USB wall adapter) using the provided USB cable.
  2. The charging indicator light will illuminate during charging.
  3. The light will turn off or change color once charging is complete.

5.2. Inserting a TF Card

A MicroSD/TF card (up to 32GB, not included) is required to save photos and videos.

  1. Ensure the camera is powered off.
  2. Locate the TF card slot on the side of the camera.
  3. Gently insert the TF card into the slot with the metal contacts facing down until it clicks into place.
  4. To remove, push the card in slightly until it springs out.

6. Operating Instructions

6.1. Power On/Off

  • To Power On: Long press the Power button for 3 seconds.
  • To Power Off: Long press the Power button for 3 seconds.

6.2. Taking Photos

  1. Ensure the camera is in Photo Mode (indicated on the display).
  2. Press the Power button briefly to take a photo.
  3. To switch filters in Photo Mode, short press the Down key.

6.3. Recording Videos

  1. In Photo Mode, press the Up button to switch to Video Recording Mode.
  2. Press the Power button briefly to start recording. Press again to stop recording.

6.4. Playback Mode

  1. From Video Recording Mode, press the Up key again to enter Video Playback Mode.
  2. In Playback Mode, briefly press the Up or Down arrow keys to view the contents of the camera's TF card (scroll through photos and videos).

6.5. Accessing Settings

  1. In Playback Mode, long press the Up button for 3-5 seconds to enter the Setting Mode.
  2. In Setting Mode, use the Up and Down keys to navigate between options.
  3. Press the Power button to confirm a setting item.
  4. To return to Photo Mode from Setting Mode, long press the Up button for 3-5 seconds.

6.6. Deleting Files

  1. In Playback Mode, long press the Down key to bring up a prompt pop-up for deletion.
  2. Use the Up and Down keys to toggle between

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.