SloMiBug PD01 Waterproof Camera

Contents

SloMiBug PD01 Waterproof Body Camera User Manual

Model: PD01

1. Introduction

Thank you for choosing the SloMiBug PD01 Waterproof Body Camera. This compact and versatile camera is designed for outdoor sports photography, field recording, and personal security. It features 1920*1080P video recording, PIR motion detection, infrared night vision, and loop recording, all within a durable, waterproof and dustproof casing.

Important Note: This camera requires a MicroSD/TF memory card (8GB to 128GB) to function. It does not have Wi-Fi capabilities.

2. Package Contents

Please check the package for the following items:

Package contents of the PD01 camera including camera, manual, USB cable, back clip, base, and box.

Figure 2.1: PD01 Camera Package Contents

  • PD01 Body Camera
  • User Manual
  • USB Charging Cable
  • Removable Back Clip
  • Camera Base Mount
  • Packing Box

3. Product Features

Waterproof Camera with icons for 1920x1080P, PIR, Waterproof, Dustproof, 1200mAh battery, Max 128GB storage, and 90 days standby time.

Figure 3.1: Key Features Overview

More features of the camera including 1920x1080P, 120 degree wide angle, PIR, night vision, waterproof, 1200mAh battery, Max 128GB, and loop recording.

Figure 3.2: Detailed Feature Icons

  • High Definition Video: Records in 1920*1080P resolution.
  • Wide Angle Lens: 120° wide-angle view to capture more.
  • PIR Motion Detection: Passive Infrared sensor for efficient motion-activated recording.
  • Infrared Night Vision: Automatic IR night vision for clear recording in low-light conditions.
  • Durable Design: Life-grade waterproof and dustproof, suitable for various outdoor environments (do not immerse in water).
  • Long Battery Life: Built-in 1200mAh battery provides up to 520 minutes (approx. 7-8 hours) of continuous recording or 90 days of standby time in PIR mode.
  • Expandable Storage: Supports MicroSD/TF cards up to 128GB.
  • Loop Recording: Automatically overwrites the oldest files when the memory card is full.
  • Versatile Mounting: Includes a removable back clip and a base mount for flexible placement.

4. Setup

4.1. Inserting the Memory Card

Detailed view of the PD01 camera showing the TF card slot, Type-C port, and mode key.

Figure 4.1: Camera Details with TF Card Slot

  1. Locate the TF card slot on the side of the camera (refer to Figure 4.1).
  2. Gently insert a formatted MicroSD/TF card (8GB-128GB) into the slot until it clicks into place.
  3. Important: The camera requires a memory card to operate. If no card is inserted, the red and blue indicator lights will flash alternately, draining the battery.

4.2. Setting the Date and Time Stamp

To ensure your recordings have the correct date and time stamp:

  1. Power on the camera briefly; it will generate a time.txt file on the memory card.
  2. Power off the camera and connect it to your computer using the provided USB cable.
  3. Open the memory card drive on your computer and locate the time.txt file.
  4. Open time.txt with a text editor (e.g., Notepad).
  5. Edit the file to reflect the current date and time in the format: YYYY-MM-DD HH:MM:SS Y (e.g., 2024-01-01 12:30:00 Y).
  6. If you wish to disable the time stamp, change the Y to N (e.g., 2024-01-01 12:30:00 N).
  7. Save the time.txt file.
  8. Safely disconnect the camera from your computer.
  9. Power on the camera again; the new time settings will be applied.

5. Operating Instructions

5.1. Controls Overview

The camera features a sliding switch with three positions and a reset button:

  • Video Mode Position (Camera Icon): For continuous video recording.
  • Power Off Position (Circle with Line Icon): Powers off the device.
  • PIR Mode Position (Running Person Icon): Activates motion-detection recording.
  • Reset Hole (R): A small pinhole for resetting the device.

5.2. Charging the Camera

Camera being charged via USB cable, showing 1200mAh battery, 90 days standby, and 520 minutes working time.

Figure 5.1: Camera Charging

  1. Connect the camera to a 5V USB charger or power bank using the provided USB cable.
  2. During charging, both the red and blue indicator lights will flash.
  3. Once fully charged (approximately 3-5 hours), both the red and blue indicator lights will remain steadily on.

5.3. Power On/Off

  • Power On: Slide the switch to either the Video Mode position (camera icon) or the PIR Mode position (running person icon). The camera will boot up and begin recording or enter standby.
  • Power Off: Slide the switch to the Power Off position (circle with line icon). The camera will save any current recording and shut down.

5.4. Video Recording

  1. Start Recording: Slide the switch to the Video Mode position (camera icon). The blue indicator light will turn on, then flash, indicating that recording has started.
  2. Save Recording: To stop and save the current video, slide the switch to the Power Off position (circle with line icon). The red and blue lights will flash twice and then turn off.
  3. Loop Recording: Videos are automatically saved in 5-minute segments. The camera supports loop recording, overwriting the oldest files when the memory card is full.

5.5. PIR Mode (Motion Detection)

PIR Mode illustration showing 120 degree wide angle camera, 5 meter field of view, and 90 days standby.

Figure 5.2: PIR Mode Operation

  1. Activate PIR Mode: Slide the switch to the PIR Mode position (running person icon). The camera will record one segment (approx. 60 seconds) and then enter standby mode.
  2. Motion Detection: When motion is detected within approximately 5 meters and within the 120° field of view, the blue light will turn on, the red light will flash, and the camera will begin recording.
  3. Save and Standby: After approximately 60 seconds of recording (or when motion ceases), the lights will turn off, the video will be saved, and the camera will return to standby mode.
  4. Exit PIR Mode: Slide the switch to the Power Off position (circle with line icon).

5.6. Infrared Night Vision

Night vision feature showing a burglar in a dark room, with an alarm light, indicating the camera supports infrared night vision and PIR mode at night.

Figure 5.3: Night Vision Capability

The camera's infrared night vision function activates and deactivates automatically based on the ambient light conditions. No manual switching is required.

5.7. Recording While Charging

You can record videos while the camera is connected to a charger or power bank. Simply connect the power source and then slide the switch to either Video Mode or PIR Mode. Note that you cannot record when the camera is connected to a computer.

5.8. Playing Back Videos

There are two methods to play videos stored on the TF card:

  1. Direct Connection: Power off the camera, then connect it to your computer using the USB cable. The camera will appear as a removable disk, and you can access the video files.
  2. Card Reader: Power off the camera, remove the TF card, and insert it into a card reader. Connect the card reader to your computer to access the video files.

6. Maintenance

Waterproof and dustproof camera with a warning not to immerse in water.

Figure 6.1: Waterproof Guidelines

  • Cleaning: Use a soft, dry cloth to clean the camera body and lens. For stubborn dirt, slightly dampen the cloth with water.
  • Water Resistance: The camera is life-grade waterproof and dustproof, meaning it can withstand sweat and rain. However, do not immerse the camera in water or expose it to high-pressure water jets.
  • Port Care: Ensure the USB port and TF card slot are dry before connecting cables or inserting cards.
  • Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

7.1. Indicator Light Status

StatusDescription
Blue light flashes twiceDevice is recording (Video Mode)
Red light flashesDevice is recording (PIR Mode)
Red and blue lights flash alternatelyNo memory card inserted, or card is unread/unplugged
Red and blue lights flash (charging)Device is charging
Red and blue lights steady on (charging)Device is fully charged

7.2. Device Not Responding / Frozen

If the camera freezes, the buttons become unresponsive, or it fails to operate normally, you can perform a reset:

  1. Locate the small reset hole (marked 'R') on the camera body.
  2. Use a thin, non-metallic object (like a paperclip) to gently press the button inside the reset hole.
  3. The device will reset and should resume normal operation.

8. Specifications

FeatureSpecification
Video FormatAVI
Video CodingM-JPEG
Video Resolution1920*1080P
Video Frame Rate30fps
Battery Capacity~1200mAh
Continuous Video Time~450-500 minutes (approx. 7-8 hours)
Charging VoltageDC-5V 1A; DC-5V 2A
Storage Support8GB-32GB (FAT32), 64GB-128GB (exFAT) MicroSD/TF Card
Transmission SpeedUSB 2.0
Interface TypeMicro USB
Battery Charging Time3~5 hours (with 5V/1A charger)
Working Humidity15~85% RH
Dimensions (approx.)2.24in (H) x 1.06in (W) x 1.50in (D)

9. User Tips

  • Always ensure your MicroSD/TF card is properly formatted (FAT32 for smaller cards, exFAT for larger ones) before first use to prevent recording issues.
  • For optimal battery life, fully charge the camera before each extended use, especially when using PIR mode for long standby periods.
  • When connecting to a computer, always power off the camera first to avoid data corruption.

10. Compliance and Disclaimer

⚠️ Disclaimer: Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of this product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area. All consequences arising from misuse shall be borne by the user.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the seller directly through your purchase platform. Please retain your proof of purchase for any warranty claims.

© 2024 SloMiBug. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.