VISHRT QWE-741

Contents

VISHRT QWE-741 360° Auto Rotate Endoscope User Manual

Model: QWE-741

1. Product Overview

The VISHRT QWE-741 is an industrial endoscope designed for detailed visual inspection in various environments. Its ergonomic design allows for single-hand operation of all function buttons. It features a 5-inch HD IPS LCD display, a high-sensitivity HD camera, and integrated CREE high-brightness auxiliary lights for clear visibility in dark conditions. Users can capture photos (JPG) and videos (MOV) and store them on a TF card. The device is powered by a built-in 5000mAh rechargeable lithium battery, providing up to 6 hours of operation. The camera probes are interchangeable, offering flexibility for different inspection scenarios.

VISHRT QWE-741 Endoscope with accessories

Figure 1: VISHRT QWE-741 Endoscope with main unit, camera probe, cable, and tool case.

1.1 Scope of Application

  • Automotive and machinery equipment repair and maintenance.
  • Inspection of plumbing and building structures.
  • Science education.
  • Outdoor adventure.

1.2 Safety and Maintenance Warnings

  • Read the product manual carefully before use to avoid damages and injuries.
  • Do not hit the camera violently or pull the cable forcefully.
  • Keep the product clean, dry, and avoid contact with oil and other hazardous materials.
  • The camera probe is not made of heat-resistant and high-temperature materials.
  • Ensure the temperature inside the engine drops to normal before using for car engine checking.
  • This product is an industrial endoscopy camera, not suitable for medical use or human inspection.
  • Keep children out of reach.

2. Setup

2.1 Unpacking

Carefully unpack the product box and ensure all items are present:

  • Endoscope Host Unit
  • Camera Cable (probe attached)
  • Instruction Manual
  • Accessories: Magnet, Hook
  • USB Type-C Charging Cable

2.2 Charging the Device

  1. Connect the provided USB Type-C charging cable to the device's charging interface.
  2. Connect the other end of the cable to a 5V household charger (5V...1A/5V...2A recommended). Fast charging is not supported.
  3. During charging, the red light of the power-on button will be continuously on.
  4. The light will turn off once the device is fully charged.
  5. If the device is unused for a long time, charge it at least once every 3 months to prevent battery damage.
Endoscope charging with 5000mAh battery indicator

Figure 2: Endoscope unit showing internal 5000mAh battery being charged.

2.3 TF Card Installation

The TF card slot is located on the side of the host unit.

  1. Ensure the device is powered off before inserting or removing the TF card.
  2. Carefully insert the TF card into the slot, paying attention to the correct insertion direction (front and back side).
  3. Do not use excessive force to avoid damaging the card slot structure.
  4. The photo, video recording, and setting functions will only work when a TF card is correctly installed.

2.4 Camera Probe Connection

The camera probe connects to the host unit via a multi-pin connector.

  1. Align the hose connector with the indication mark on the host port.
  2. Gently insert the connector into the port.
  3. Turn the connector clockwise until it is securely locked.
  4. Important: Always connect the camera probe before powering on the machine. If you change the camera probe, restart the machine for proper detection.
Split design connector for endoscope camera probe

Figure 3: Detail of the split design connector for the camera probe, enhancing durability.

3. Operating Instructions

3.1 Power On/Off

  • To power on or off the device, long press the Power button for 3 seconds.

3.2 Basic Controls and Functions

The endoscope features several buttons for easy operation:

  • Power Button: Long press to power on/off.
  • Setting Button (Setting button icon): Acts as the "back" function in the menu screen and the "menu" function in the image screen.
  • Up-Select Button / Right Rotary Button (Up arrow button icon): Moves up in menu selections. Press and hold to rotate the image to the right.
  • OK Button (OK button icon): Confirms selections in the menu. Press and hold to switch to the album (view photos and videos). In the image screen, short press to switch between front and side cameras.
  • Down-Select Button / Left Rotary Button (Down arrow button icon): Moves down in menu selections. Press and hold to rotate the image to the left.
  • Shooting Button (Camera icon button): Short press to take pictures. Long press to record videos, and short press again to stop recording.
  • Brightness Adjustment Switch: Adjusts the brightness of the camera's LED light.

3.3 Camera Switching (Dual/Triple Lens)

The endoscope supports dual or triple lens configurations. To switch between active camera lenses:

  • While in the image viewing mode, short press the OK button to cycle through the available camera views (e.g., Front Lens A, Side Lens B, Side Lens C, or combinations like A+B, A+C depending on your model).
Diagram showing dual and triple lens configurations and switching

Figure 4: Visual representation of dual and triple lens options and how to switch between them.

3.4 Screen Rotation

The device supports 180° screen rotation for optimal viewing angles.

  • Press and hold the Up-Select Button to rotate the image to the right.
  • Press and hold the Down-Select Button to rotate the image to the left.

3.5 Viewing Photos and Videos

  1. Long press the OK button to enter or exit the album mode.
  2. Use the Up-Select and Down-Select buttons to navigate through your captured photos and videos.
  3. To delete a photo or video, select it and then press the Setting Button.
  4. To view captured media on a computer, eject the TF card (by pressing it in) and use a card reader.

Video 1: Demonstration of the endoscope's features, including power-on, LED light adjustment, camera switching, and real-world application in an engine.

4. Maintenance

4.1 Cleaning

  • Keep the product clean and dry. Avoid contact with oil, water, and other hazardous materials that could cause corrosion.
  • If the imaging picture is unclear, clean the front of the camera lens with a clean alcohol cloth.

4.2 Storage

  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • If the device is left unused for a long period, ensure it is charged at least once every three months to maintain battery health.

5. Troubleshooting (FAQ)

Problem Solution
Product does not show pictures or black screen Remove the camera connector, reassemble and tighten, or restart the device.
Stuck on the picture Check if the product has sufficient power, restart the device, or reassemble the camera connector.
Imaging picture not clear The best imaging focal length is 2cm-10cm. Calibrate the distance from the object or clean the camera lens with an alcohol cloth.
Product not charging Use a 5V...1A/5V...2A charger. Fast charging is not supported.
Camera heating up Normal, especially when LED light is at highest brightness. Does not affect normal use.
Device crash, no response, or blurred screen Press the 'Reset' button on the back of the device to reset it.

6. Specifications

6.1 Display

  • Screen Type: 5-inch True Color IPS LCD Display
  • Screen Resolution: 854 x 480
  • Screen Rotation: 180° flip

6.2 Camera

Feature Dual Lens Triple Lens
Camera Diameter 7.9mm 7.9mm
Camera Resolution 2 Megapixels 2 Megapixels
Viewing Angle 78° 78°
Auxiliary Lighting 8+1 LEDs with adjustable brightness 6+1+1 LEDs with adjustable brightness
Front Camera Focus Range 50-150mm 50-150mm
Side Camera 1 Focus Range 50-100mm 50-100mm
Side Camera 2 Focus Range N/A 50-100mm

6.3 Recording and Storage

  • Supported Camera Resolution: 1920x1080
  • Photo Resolution: 1920x1080
  • Video Resolution: 1280x720
  • Port: TF Memory Card Slot

6.4 Power

  • Battery: 5000mAh Lithium Battery
  • Battery Life: 5-6 hours
  • Battery Charging Time: 4 hours
  • Port: Type-C Charging Port

6.5 Other

  • LED Flashlight: 1W high brightness LED light
  • Operating Temperature: 32-113°F (0°-45°C)

7. User Tips

  • Optimal Viewing: For the clearest images, ensure the camera lens is clean and adjust the LED brightness to suit the inspection area.
  • Maneuvering: Practice guiding the camera probe in open spaces before attempting complex inspections to get a feel for its flexibility and control.
  • Battery Life: To maximize battery life during extended use, consider turning off the screen when not actively viewing, if possible, or keep a power bank handy for recharging.
  • Data Management: Regularly transfer photos and videos from the TF card to your computer to free up space and back up important inspection data.

8. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims.

For technical support or service inquiries, please contact the retailer or manufacturer's customer service department.

© 2024 VISHRT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.