EMS RF 6500W Electromagnetic Body Contouring Device

1. General Information

The MYOSLIM EMS RF 6500W Electromagnetic Body Contouring Device utilizes advanced HI-EMT technology, employing high-energy focused electromagnetic waves (HI-EMT) designed to induce powerful muscle contractions, thereby promoting muscle growth and reshaping the internal structure of muscles. Additionally, it triggers significant fat breakdown through intense muscle contractions, causing fatty acids to be released from triglycerides and metabolized by the body over several weeks.

Advanced HI-EMT Technology

The EMSZERO series employs advanced HI-EMT technology, utilizing high-energy focused electromagnetic waves to achieve intense muscle contractions, promoting muscle growth, and deep internal structural reshaping.

Touch-Controlled Display

The touch-controlled display significantly simplifies device operation, allowing clear visibility of information from various positions. The brightness of the display is adjustable to accommodate different office lighting conditions. User-friendly, the screen guides you throughout the entire treatment process.

Real-time Monitoring and Guidance

Throughout the treatment process, the display shows remaining treatment time, utilized channels and treatment methods, applied treatment types, attachments used, and other necessary information. This aids users in real-time monitoring of treatment progress and provides necessary guidance.

Upgradeability

As your therapeutic needs evolve, you may wish to upgrade your equipment later on. The EMSZERO series offers flexible upgrade options to meet your future treatment requirements.

1.1 Indications for Use

EMSZERO is intended for:

1. Improvement of abdominal tone, strengthening of the abdominal muscles, development of fitter abdomen.
2. Strengthening, Toning and Firming of buttocks, thighs and calves.
3. Improvement of muscle tone and firmness, for strengthening muscles in arms.

1.2 Operating Environment

The operating environment of the EMSZERO instrument series is crucial to ensuring the effectiveness and safety of the device.

• Clean and Hygienic Environment: The operating environment should be clean and hygienic to prevent any external contamination or bacterial infections. Regular cleaning and disinfection of the equipment and its accessories are essential.
• Appropriate Temperature and Humidity: Ensure that the operating environment's temperature and humidity are within the appropriate range specified by the device manufacturer. Extreme temperatures or excessive dryness/humidity may impact the device's performance.
• Adequate Lighting: Provide sufficient lighting to ensure that operators can clearly see and operate the equipment correctly. This is especially important for conducting precise beauty procedures.
• Good Ventilation: The area where the equipment is operated should have adequate ventilation to ensure air circulation and prevent the accumulation of any harmful gases.

2. Safety Precautions and Warnings

Precautions Before Use:

• Do not use when feeling full; wait at least one hour after meals.
• Remove all metal jewelry before using the instrument.
• Before starting operation, touch the probe vertically to the skin, then turn on the main unit switch and gradually adjust the intensity according to skin tolerance.
• It is forbidden to eat or drink during operation. Wait at least one hour after operation before eating.

Safety Measures:

The operating environment should have appropriate safety measures, including fire extinguishers and first aid equipment, to address emergencies. Operators should be familiar with the equipment's safety procedures and know how to handle emergency situations.

Avoidance of Interference Sources:

The operating environment for beauty equipment should be kept away from any electromagnetic fields or other devices that could potentially cause interference, ensuring the normal operation of the equipment.

Operator Training:

All operators using beauty equipment should undergo proper training to understand the correct usage and safety procedures of the equipment.

1.5 Contraindications:

• Wounds on the skin (or avoiding wounds when using).
• Patients with heart disease (such as those with arrhythmias), especially those with pacemakers.
• Cancer patients.
• Patients with infectious diseases.
• Pregnant women, lactating women, or during menstrual period.
• Major surgery patients, diabetic patients.
• Individuals with any metal in the body.
• People with cerebrovascular disease (stroke patients).

1.6 Possible Side Effects:

These effects may include but are not limited to:

• Muscle soreness.
• Reduction in muscle fat.
• Temporary muscle spasms.
• Transient joint or muscle tendon pain.
• Localized redness or skin flushing.

3. Device and Accessories

3.1 Front and Rear Panel of the Main Unit

The main unit features a display screen and EMS handles on the front. The rear panel includes connections for the handles, a power plug, and a fuse. The handles are designed for specific use with this machine and are not interchangeable with other devices.

3.2 Handle Types (Optional Accessories)

The device supports various handle types for different treatment areas. These include standard handles, handles with straps for secure placement, and a cushion-style handle for broader areas. Ensure you use the correct handle for the intended treatment.

3.3 List of Accessories

4. Device Installation

Follow these steps to properly install your EMS RF 6500W device:

1. Install the Handle Bracket: Use a screwdriver to install the handle brackets on both sides of the machine.
2. Handle Film: Stick the black film to the working part of the handle.
3. Installing the Handle: Align the handle with the handle controller and fasten the clip. Lock the key ring to secure it.
4. Connect Power: Connect one end of the power cord to the machine and plug the other end into a suitable power socket. Do not connect multiple machines to a single socket.
5. Press on the Back Switch: Locate the manual switch on the rear panel and move it to the 'o' position (power off).
6. Press the Front Switch: Press the button on the front panel to power on the device. Long press to power off.

5. Basic Device Operation

5.1 Handle Exchange

The handle must be calibrated every time it is installed or replaced. Important: When replacing the handle, you must turn off the power of the machine. The handle cannot be replaced when the machine is powered on.

5.2 Device Start Up/Shut Down

1. Connect one end of the power cord to the machine and plug the other end into the socket. Plug the power cord directly into the main socket. Do not connect multiple machines to the socket.
2. Move the manual switch on the rear panel to the "o" position.
3. Press the button on the front panel.
4. When the treatment is finished, press and hold the power button to turn off the machine.

5.3 Navigation Controls

Pre-treatment regimen can be modified via on-screen controls. The treatment interface displays the following items and functions:

• Navigation Controls: Used to move through menus and options.
• Channels Selector: To select active channels for treatment.
• Stop Therapy: Button to immediately halt the ongoing therapy.
• Start/Pause Therapy: Button to start or pause the therapy session.
• Setting Up Therapy Parameters: Options to configure treatment settings.

5.4 Unit Settings

The device offers different operation modes and settings:

Mode 1 Operation Interface:

This mode allows you to adjust parameters such as part, age, and gender where the machine needs to be used. You can adjust these settings according to your needs. The frequency range for Mode 1 is 5-60Hz.

To begin, select Mode 1, adjust the desired parameters (e.g., region: Abdomen, Buttocks, Other; Age Group: <30, 30-39, 40-49, 50-59, 60+), and then click the start/stop button to proceed.

Mode 2 Operation Interface:

In Mode 2, you can adjust the energy level and energy size according to your body system and needs. This mode also allows for adjustment of intensity, stage frequency, and time. The frequency range for Mode 2 is 30-100Hz.

Adjust the corresponding intensity/stage frequency/time according to different customer needs. Click the start/pause work button to enter the operation work. If the customer requests to pause, click start/pause. After the work is completed, you can directly click the back button to return.

6. Therapy

6.1 Preparing the Therapy

1. Communicate with patients to understand their needs and comfort levels.
2. Ensure the patient is in good health and has no contraindications.
3. Advise the patient to stay hydrated before and after the session.
4. Ensure the patient wears appropriate, comfortable clothing.
5. Advise the patient to avoid eating in large quantities before the session.
6. Familiarize yourself with the treatment process and settings.
7. Advise the patient to avoid drinking alcohol before the session.

6.2 Placing the Handle

The handles should be securely placed on the target treatment area using the provided straps. Ensure a snug fit without being overly tight to allow for effective electromagnetic stimulation.

• Belly: Place the handles over the abdominal area and secure with a strap.
• Buttock: Position the handles on each buttock and secure them.
• Arm: Attach a handle to the arm, ensuring it covers the target muscle group.
• Thigh: Secure handles to the thigh area.
• Calf: Place handles on the calf muscles.
• Arse: Use the cushion-style handle or two standard handles for the gluteal region.

Please operate according to the controller model you purchased and follow the manufacturer's official documentation to ensure the best experience. If you have any questions, please contact customer service for support.

7. Maintenance and Repair

7.1 Maintenance

7.1.1 Daily Inspection:

Regularly inspect the instrument and components. Check that the power socket has a reliable connection to the ground. Verify that the power cord is not damaged. If any damage is found, stop using the instrument immediately.

7.1.2 Cleaning:

Clean the instrument regularly to ensure sanitation and proper functioning. The device housing can be wiped with a damp cloth, soapy water, or a neutral detergent while the instrument is powered off. Do not use alcohol-based detergents on painted surfaces.

7.1.3 Replacing the Fuse:

To prevent electric shock, always turn off the power and unplug the power plug before replacing the fuse. The fuse is located below the handle junction on the back of the machine. An additional spare fuse is included.

8.3 Cleaning of Accessories That Come Into Contact with Patient:

The parts that come into contact with the skin should be cleaned and disinfected with 75% alcohol before and after each use. Do not soak these parts directly in alcohol-based detergent; wipe with pure cotton material.

8.4 Transport and Storage

Storage:

The instrument should be stored in its original packaging box, in a well-ventilated room. The packaging box should be padded. The ambient temperature should be -10°C to 40°C, and the relative humidity should not exceed 93%. Avoid storing near harmful gases, flammable, explosive, or corrosive substances.

Transportation:

The instrument, in its packaging, is suitable for road, railway, air, and water transportation. During loading, unloading, and transportation, prevent severe vibration and shock. Protect from moisture and do not mix with flammable or corrosive substances. Specific requirements are detailed in the order contract.

8.6 Common Faults and Troubleshooting Methods

9. Technical Parameters

9.1 Electromagnetic Compatibility (EMC)

The device has undergone Radiated Electromagnetic Field Immunity Test according to IEC 61000-4-3:2020, with a test level of 30V/m with 80% AM, 1kHz Modulation. The test setup involves a 7x4x3 Chamber with EUT & Support, Power Amp, Signal Generator, and EUT Monitoring using a camera in a Contro Room.

User Tips

• Voltage Compatibility: Always ensure the device's voltage setting (110V or 220V) matches your local power supply to prevent damage and ensure safe operation. Consult the technical parameters and your local electrical standards.
• Handle Placement: For optimal results and comfort, ensure the handles are securely fastened to the treatment area using the provided straps. This prevents movement during the intense muscle contractions.
• Gradual Intensity Adjustment: Especially for new users, start with the lowest intensity level and gradually increase it based on your comfort and skin tolerance. This helps prevent discomfort or adverse reactions.

10. Warranty and Manufacturer

10. Warranty Card

The main machine is guaranteed for one year from the date of purchase (with receipt), excluding fragile parts and other non-warranty scope or expired warranty periods. Accessories have a warranty period of 3 months. Man-made damage is excluded from warranty coverage.

Free warranty service is not provided for failures caused by:

• Unauthorized disassembly and modification of the product.
• Accidental falls.
• Lack of reasonable maintenance.
• Failure to operate according to the correct instructions in this user manual.

If the instrument is broken and needs repair, the buyer shall bear the return shipping cost within six months from the date of purchase, and the seller shall bear the shipping in cost; after six months, the buyer shall bear all shipping costs.

For maintenance and updates, maintenance fees will be charged appropriately. After the warranty period, please contact the manufacturer directly for paid after-sales service. Any unpacking without consent will void the warranty.

11. Manufacturer

Guangzhou Xinwei Electronic Technology Co., Ltd.