1. Introduction
The Staniot LoRa Version 120dB Wireless Strobe Siren is designed for alarm systems and emergencies, featuring two ultra-loud buzzers and a stylish design to enhance home security. It supports optional solar panel charging, wireless and wired connections, and user-friendly features. When triggered, it emits a loud alarm and strobe lights to deter intruders.
This siren utilizes LoRa technology for a long-range and stable connection, making it suitable for various property sizes, including villas, communities, and multi-story buildings. Its robust design ensures comprehensive coverage and reliable performance.
For a visual guide on using the alarm system, you may refer to the official video guidelines on YouTube: Staniot Official YouTube Channel.
2. Safety Information
- Ensure the device is installed in a location where it is protected from extreme weather conditions, although it features excellent waterproof performance.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for service.
- Keep the device away from children and pets.
- Use only the specified power supply (DC 6V~15V 1A) or the optional solar panel for charging.
- Be aware that the 120dB alarm is very loud and can be startling. Adjust the volume settings appropriately for indoor and outdoor use to avoid discomfort to family members, especially the elderly and children.
3. Package Contents
- Staniot LoRa Wireless Strobe Siren (WSR300-L)
- Waterproof pad
- Waterproof cover
- Screws for installation
- User Manual (this document)
- Optional: Solar Panel (if 'Solar Strobe Siren Kit' package is purchased)
4. Appearance and Components
The diagram below illustrates the key components and interfaces of the Staniot LoRa Wireless Strobe Siren.
- Tamper Switch: Detects unauthorized removal or tampering with the siren.
- Buzzer: Two ultra-loud sound emitters for alarm.
- DC6V-15V 1A: Power input terminal.
- Volume Touch Button: Adjusts the siren's alarm volume.
- Setting Touch Button: Used for pairing and other settings.
- Battery Switch: Controls the internal battery power.
- Solar Charging Interface (Optional) 5V 1A: Port for connecting an external solar panel.
- Wired Input: Terminals for wired alarm system integration.
- Wired Output (Optional): Terminals for triggering external devices.
- Warning Light: Strobe light for visual alarm indication.
5. Setup
5.1 Physical Installation
Follow these steps to install your strobe siren:
- Install Waterproof Pad and Cover: Attach the waterproof pad and cover to the siren's rear casing as shown in Figure 2.
- Mount Hanging Plate: Fix the hanging plate securely to the desired wall location using the provided screws.
- Hang Siren: Carefully hang the siren onto the installed hanging plate.
5.2 Pairing with Alarm System (Staniot Secpanel 7 Pro)
Important: This LoRa version siren is only compatible with the Staniot Secpanel 7 Pro alarm host. It will not work with Staniot Secpanel 7, Secpanel 5, Secpanel 3, or other 433MHz alarm hosts.
- Power On: Connect the siren to an external power supply (DC 6V~15V 1A) and turn the internal battery switch to the ON position.
- Enter Pairing Mode: Press and hold the Setting Button (gear icon) for 2 seconds. All lights on the siren will illuminate, indicating it is waiting for pairing.
- Trigger Alarm Host: On your Staniot Secpanel 7 Pro alarm host, navigate to the accessory connection menu and select 'Siren'. Follow the on-screen prompts to send a pairing signal.
- Confirmation: The siren will emit a long beep after receiving the signal, and the warning light will stay on for 1 second. This confirms successful pairing.
Note: Up to 10 alarm hosts can be paired with a single siren.
5.3 Wired Connection
The siren supports both Normally Closed (NC) and Normally Open (NO) wired inputs and outputs.
- NC/NO Input: When the siren is in the armed state and the wired zone is triggered, the siren will sound the alarm. If the wired zone is triggered while the system is disarmed, the siren will not sound.
- NC/NO Output (Optional): After the siren alarms, the corresponding wired output interface can trigger other connected devices.
6. Operation
6.1 Siren & Warning Light Status Indicators
- Away Arm: The siren beeps 3 times, and the left and right LED lights are on.
- Home Arm: The siren beeps 3 times, and the middle LED light is on.
- Disarm: The siren beeps 1 time, and all LED lights turn off.
- Alarm: The warning light keeps flashing, and the siren sounds according to settings.
- Low Battery Status: The siren beeps once every minute, and the warning light flashes once.
6.2 Volume and Setting Touch Button Functions
The touch buttons on the siren allow for adjustment of volume, alarm tone, duration, and pairing. Note that the touch buttons will automatically lock after 1 minute of inactivity to conserve power and prevent accidental touches.
| Button (Icon) | Operation | Function | Details | Beeps & LED Light Flash (times) |
|---|---|---|---|---|
| Volume Button | Short press | Set the siren volume | Mute | 1 |
| 60dB | 2 | |||
| 80dB | 3 | |||
| 100dB | 4 | |||
| 120dB (Default) | 5 | |||
| Volume Button | Long press 2s | Set siren tone | Tone 1-2 | |
| Setting Button | Short press | Set Siren duration time | 30s | 1 |
| 1min | 2 | |||
| 3min (Default) | 3 | |||
| 5min | 4 | |||
| Setting Button | Long press 2s | Pair with alarm system | Pairing time 30s | Pairing successful: 1 time Pairing failed: 5 times |
| Volume + Setting Buttons | Long press 5s (within 10s after power on) | Reset | Clear all pairing records, system reboot | 1 |
7. Maintenance
- Cleaning: Wipe the siren's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: The built-in 5000mAh battery provides long-lasting power. If using the optional solar panel, ensure it is clean and free from obstructions to maximize charging efficiency.
- Tamper Protection: The siren features an anti-dismantling alarm. If the tamper switch is pressed and released after 10 seconds, or if the siren is removed from its mounted position, an alarm will sound. Ensure the siren is securely mounted to prevent false alarms.
- Firmware Updates: Check the Staniot official website or app for any available firmware updates to ensure optimal performance and security.
8. Troubleshooting
- Siren not pairing: Ensure the siren is in pairing mode (lights on after holding Setting Button for 2s) and that your alarm host is sending the pairing signal. Verify compatibility with Staniot Secpanel 7 Pro.
- No alarm sound/strobe: Check power connection and battery level. Ensure the siren is armed and not muted. Verify that the alarm host is correctly triggering the siren.
- False alarms: Check the tamper switch for proper installation and ensure the siren is securely mounted. Review wired connections for any loose contacts if applicable.
- Low battery indication: If the siren beeps once per minute and the warning light flashes, recharge the battery via the external power supply or ensure the optional solar panel is receiving adequate sunlight.
9. Specifications
| Parameter | Value |
|---|---|
| Model Number | WSR300-L |
| Power Supply | DC6V~15V 1A |
| Built-in Battery | 3.7V/5000mAh Lithium Battery |
| Standby Current | <10mA |
| Alarm Current | <1000mA |
| Wireless Parameters | LoRa |
| Receiving Distance | 500 meters (open space) |
| Siren Volume | 120dB (5 levels adjustable) |
| Alarm Tone | 2 options available |
| Alarm Time | 4 options available |
| Input Interface | NC/NO |
| Output Interface | NC/NO |
| Working Temperature | -20°C ~ +50°C |
| Relative Humidity | <95% (no condensation) |
| Product Size | 270 × 180 × 47mm |
| Smart Home Platform | Tuya |
| Certification | CE, RoHS |
10. User Tips
- Compatibility Check: Always double-check that you have the correct LoRa version of the siren for your Staniot Secpanel 7 Pro alarm host. This siren is not compatible with other Staniot models or 433MHz systems.
- Volume Adjustment: Utilize the 5-level volume adjustment feature. Set a lower decibel for indoor use to avoid startling occupants, and the maximum 120dB for outdoor use to effectively deter intruders.
- Solar Charging: If you opt for the solar siren kit, ensure the solar panel is installed in a location with ample direct sunlight for efficient charging and sustained operation.
- Button Lock Feature: Remember that the touch buttons automatically lock after 1 minute of inactivity. This is a power-saving feature and prevents accidental changes to settings.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Staniot customer service or refer to the official Staniot website. Keep your purchase receipt as proof of purchase for warranty claims.
A detailed user manual in PDF format is also available for download from the seller's product page or by contacting support. (Reference: User manual (PDF))