Teclast ArtPad Pro

Contents

Teclast ArtPad Pro Tablet User Manual

Model: ArtPad Pro

Introduction

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Teclast ArtPad Pro tablet. Please read this guide thoroughly to ensure proper use and to maximize your device's performance.

Teclast ArtPad Pro tablet with key features highlighted

Teclast ArtPad Pro tablet showcasing its 12.7-inch IPS screen, 8GB RAM, 256GB ROM, Android 15, G99 Octa-Core processor, 10000mAh battery, and dual cameras (Front 8MP, Back 13MP).

Setup Guide

This section will guide you through the initial setup of your Teclast ArtPad Pro tablet, including language selection, Wi-Fi connection, and basic settings.

Initial Power On

  1. When the device is off, long press the power button for 3 seconds to turn on the device.
  2. Upon first boot, you will be guided through selecting your system language, time zone, connecting to Wi-Fi, and setting up your username and device name.
Android setup screen 'Hi there'

Screenshot of the Android setup screen, prompting the user to begin configuration.

Wi-Fi Connection

  1. Open Settings and navigate to Network & Internet.
  2. Turn on Wi-Fi, select your desired wireless network, and enter the network password to connect.

Cellular Connection (4G LTE)

Applicable to supported devices only.

  1. Insert your SIM card into the designated slot and power on the system.
  2. Open Settings and navigate to Network & Internet.
  3. Turn on the cellular data toggle.
Diagram showing LTE Support with dual SIM and 4-Mode Navigation features

The tablet supports TDD/FDD dual-mode 4G LTE with a 2+1 SIM slot for concurrent calling and browsing, alongside 4-Mode Navigation (GPS/GLONASS/Galileo/BeiDou).

Bluetooth Connection

Applicable to supported devices only.

  1. Open Settings and navigate to Connected Device.
  2. Turn on Bluetooth. The system will automatically search for nearby Bluetooth devices.
  3. Click on the connectable Bluetooth device and select Pair in the pop-up menu.
  4. Wait for the Bluetooth device to confirm pairing.

Language and Input

  1. Open Settings and navigate to Language and Input.
  2. Select your preferred system language.
  3. Choose the default system input method and its respective settings.

Date and Time

  1. Open Settings and navigate to Date and Time.
  2. Enable Automatic date & time and Automatic time zone to sync with the internet. You can manually adjust these settings by disabling the automatic function.
  3. Select your preferred 24-hour format (AM/PM or 24-hour).

Operating Instructions

Button Functions

  • Power Button:
    • When off: Long press for 3 seconds to turn on.
    • When on: Short press to turn the screen on/off.
    • When on: Long press for 3 seconds to access the shutdown interface. Long press for 10 seconds to force shut down.
  • Volume + Button: Press to increase the volume.
  • Volume - Button: Press to decrease the volume.
Tablet physical layout with button and port labels

Physical layout of the Teclast ArtPad Pro, indicating the location of the Rear Camera/Flashlight, Front camera, SIM/TF Card slot, Volume buttons, Smart Button, Speakers, Power button, and Type-C port.

Virtual Button Bar

  • HOME button: Return to the home screen.
  • Back button: Return to the previous screen.
  • Background button: View, switch, and close background apps.
  • Menu button: Open the menu.
  • Screenshot button: Capture the current screen.

Control Center

Access the Control Center by swiping down from the top of the screen (or as per Android 15 gestures) to quickly manage settings:

  • User: Switch local user accounts.
  • Settings: Access system settings.
  • Battery: Access battery settings.
  • Wi-Fi: Turn Wi-Fi on/off.
  • Bluetooth: Turn Bluetooth on/off.
  • Volume: Quickly adjust volume.
  • Flight mode: Turn airplane mode on/off.
  • Auto-rotation: Turn auto-rotation on/off.
  • GPS: Turn GPS on/off.
  • Miracast: Turn Miracast on/off.

Display Settings

Open Settings and navigate to Display:

  • Brightness: Adjust the slider to control screen brightness.
  • Wallpaper: Set your preferred wallpaper.
  • Sleep: Configure the screen time-out duration.
  • Font size: Adjust the size of system fonts.
  • Auto-rotation: Lock the current screen orientation or allow automatic rotation based on device orientation.
Image showing the tablet's display area compared to a standard 16:9 tablet

The ArtPad Pro features a Canvas Display with 20% more workspace than standard 16:9 tablets, offering a bigger vision for creativity.

Image showing the tablet's display resolution, IPS panel type, pixel count, color optimization, and PPI

The 2176x1600 Ultra HD IPS display with 3.48 Million pixels and 213 PPI provides true-to-life colors and crisp text, enhanced by Art Vision for optimal visual experience.

Image showing the tablet's display refresh rate, touch sampling rate, and TDDI Full Lamination

Experience fluid visuals with a 90Hz Adaptive Refresh Rate and responsive interaction with a 180Hz Touch Sampling Rate, supported by TDDI Full Lamination.

Sound Settings

Open Settings and navigate to Sound:

  • Volume: Adjust the slider for media, alarm, and ringtone volumes.
  • Notification: Set your preferred notification sound.
  • Ringtone: Set your incoming call ringtone.
  • Other Sounds: Configure lock screen and touch sound effects.
Image showing the tablet's audio features

The ArtPad Pro features a Symphony Acoustic System with four 9CC large chamber speakers, AI Hyper-Audio, and Art Tune Audio Algorithm for immersive sound.

Diagram illustrating AI-Powered Sound features and modes

AI-Powered Sound includes Game Scene Enhancement, AI Surround Sound, Piano Noise Reduction, AI Sibilance Reduction, Auto Power Save, and Auto Sound Calibration, with dedicated Game, Movie, and Music modes.

ArtOS Features

The ArtPad Pro runs on ArtOS, powered by Android 15, offering intuitive features for enhanced productivity and creativity.

Diagram illustrating ArtOS features: Assistive Control and Quick Sidebar

ArtOS includes Assistive Control for quick app launch and a Quick Sidebar for fast system control, optimized for the 4:3 display.

Diagram illustrating the Smart Button features

The Smart Button provides one-touch access to favorite features, allowing you to launch apps, switch modes, or trigger shortcuts, customizable to your preference.

Diagram showing Art Space smart modes

Art Space offers customized modes for different scenarios, including Standard Mode for lasting enjoyment, Pastel Mode for soft colors, and Ink Mode for a paper-like reading experience.

Teclast T-Pen (Optional Accessory)

Unleash your creativity with the Teclast T-Pen, designed for smooth, intuitive drawing and note-taking. It features 4096 levels of pressure sensitivity and global palm rejection. Teclast tablets also support USI 2.0 styluses for precise, responsive input.

Diagram detailing Teclast T-Pen features

The Teclast T-Pen offers 4096-level true pressure-sensitive writing, integrates with the Teclast Art Note App, features global palm rejection, and supports USI 2.0 Universal Protocol.

Maintenance

Battery Status

To view battery usage, open Settings and navigate to Battery. You can toggle the Battery Indicator switch to display the battery percentage.

For optimal battery health, if the product is going to remain unused for an extended period, perform a full recharge every 3 months.

Charger Specifications

Ensure that the charger used matches the input voltage/current specifications shown on the back of your product. Only use chargers that meet these specifications.

For USB PD fast charging, the charger must deliver between a minimum of 2.5 Watts and a maximum of 18 Watts to achieve the maximum charging speed.

For first use after prolonged storage, the product may require a 30-minute charging session before the charging status is indicated on the screen.

Hazardous Substances in the Product

The table below indicates the presence of hazardous substances in the product, in compliance with SJ/T 11364 and GB/T 26572 standards.

Table of Hazardous Substances
Component Pb (Lead) Hg (Mercury) Cd (Cadmium) Cr(VI) (Hexavalent Chromium) PBB (Polybrominated Biphenyls) PBDE (Polybrominated Diphenyl Ethers)
Device X O O O O O
Accessories O O O O O O

O: Indicates that the content of this hazardous substance is under the limitation of GB/T 26572.
X: Indicates that the content of this hazardous substance is over the limitation of GB/T 26572.

Connect to PC

You can connect the device to a PC using a USB cable to copy or delete data.

  • For Windows 7 and above, MTP drivers will install automatically.
  • For Windows XP, Windows Media Player 11 must be installed before connecting.

Factory Reset

  1. Open Settings and navigate to System Setting > Advanced > Reset Options.
  2. Perform a factory reset. Please back up all personal data before resetting, as it will be erased.

Troubleshooting

FCC Compliance and Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important:

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Common Issues

  • Device not turning on: Ensure the battery is charged. If completely drained, it may require up to 30 minutes of charging before the screen indicates power.
  • Wi-Fi/Bluetooth connection issues: Ensure the respective functions are enabled in the Control Center or Settings. Try restarting the tablet or the router/Bluetooth device.
  • Tablet unresponsive: If the tablet becomes unresponsive, long press the power button for 10 seconds to force a shutdown, then restart the device.

Specifications

Feature Specification
Brand NameTeclast
ModelArtPad Pro (8533-TPTE3856-0000)
Operating SystemAndroid 15 (ArtOS)
Display Size12.7 inches
Panel TypeIPS
Display Resolution2176x1600 (3.48 Million Pixels, 213 PPI)
Refresh Rate90Hz Adaptive Refresh Rate
Touch Sampling Rate180Hz
Memory Capacity8GB LPDDR4 RAM (20GB Extended RAM)
Tablet Storage Capacity256GB UFS (Up to 1TB TF Card support)
Processor ManufactureMTK
Processor CoreOcta Core (G99)
Network Communication4G LTE (Dual SIM support)
Front Webcam Pixels8MP
Second Webcam Pixels (Rear)13MP
Cell Capacity10000 mAh
Charging30W Superspeed Charging, Type-C Extend Port
NavigationGPS/GLONASS/Galileo/BeiDou (4-Mode Navigation)
FeaturesOTG, Dual Cameras, Smart Button, Art Space, AI-Powered Sound
Dimensions (approx.)279mm (10.98in) x 211mm (8.31in)
Body MaterialCNC Metal Process, 7mm Slim Body, Space Grey Metal
Supporting LanguageEnglish, Russian, Spanish, Swedish, Portuguese, Turkish, Italian, German, French, Japanese, Polish, Ukrainian, Greek, Hebrew
Diagram showing the dimensions of the Teclast ArtPad Pro tablet

The Teclast ArtPad Pro measures approximately 279mm (10.98 inches) in length and 211mm (8.31 inches) in width.

Image highlighting the tablet's physical design

Crafted from a single block of metal via CNC precision machining, the ArtPad Pro boasts an ultra-slim 7mm profile with uniform bezels and a Space Grey metal body.

Warranty and Support

This series of products implements the national standard: GB 28380-2012 (Microcomputer Energy Efficiency Limit and Energy Efficiency Grade).

For technical support, please contact: aftersales@sk1999.com

The product is manufactured in China.

User Tips

  • Accessory Check: Upon receiving your Teclast ArtPad Pro, verify that all expected accessories, including the official Teclast T-Pen and charger, are present and in their original packaging. Some users have reported receiving unofficial replacements or missing items.
  • Stylus Experience: For an optimal drawing and note-taking experience, consider using the official Teclast T-Pen, which supports 4096 levels of pressure sensitivity and global palm rejection.
  • Display Quality: The tablet features a large, clear display with high resolution, making it suitable for creative tasks and media consumption despite its slightly heavier build compared to some other tablets.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.