1. Product Introduction and Features
The CARABC Wireless Carplay Android Auto Module enhances your Porsche's infotainment system by integrating wireless Apple Carplay and Android Auto functionalities. This module is designed to work seamlessly with your original car display and controls, providing a modern and connected driving experience.
Key Features:
- Wireless Connectivity: Supports wireless Apple Carplay, Carlife, and Android Auto.
- Phone Mirroring: Wireless phone-link for screen mirroring.
- High Performance: Powered by Sunplus SPHE8368-U 800MHz chip, running on LINUX system for stability and performance.
- Memory: 128MB DDRIII SDRAM and 128MB SLC NAND FLASH.
- Integrated Functions: After connection, the original screen supports positioning, navigation, voice search, Bluetooth functions, and music playback.
- Video Output: Supports multi-format video output including Analog CVBS, LVDS HD, and Digital RGB888.
- Audio Output: Two channels of CD stereophonic sound output.
- Original System Integration: Supports original car's operating system, MIC for high-quality audio and echo control.
- Media Playback: Smooth playback of 1080P multi-format video (H.264 included) via USB-HOST.
- Control Interface: Operable via UART connector for touch screen and original car buttons.
- Camera Support: Extends support for reverse video input (AHD HD), front view camera, and DVR.

Image: CARABC Wireless Carplay Android Auto Module integrated into a Porsche dashboard, showing Carplay interface and hardware components.
Video: Demonstration of the Wireless Carplay and Android Auto module in operation within a Porsche vehicle, showcasing navigation, music, and app functionality.
2. Specifications
| Feature | Specification |
|---|---|
| Chip | Sunplus SPHE8368-U |
| Main Frequency | 800MHz |
| Operating System | Linux Gemini |
| RAM/ROM | 128MB/256MB |
| Supported Audio Formats | MP3, WMA, AAC, FLAC, WAV |
| Supported Video Formats | AVI, MKV, MP4, FLV, MPEG, H.264 |
| Dimensions | 60mm × 39mm × 6mm |
| Working Environment Temperature | -40°C ~ +85°C |
| Storage Environment Temperature | -40°C ~ +100°C |
| Storage Humidity | 30% ~ 90% |
| Working Humidity | 45% ~ 80% |
| Rating Voltage | 5V |
| Normal Working Voltage | DC 5V (±0.3V) |
| Standby Current | ≤1mA |
| Video Output | CVBS/RGB888/LVDS |
| Audio Output | Two-channel CD stereophonic sound |
| Voice Input | MIC analog signal |
| USB Port | 1 group |
| Wireless Carplay | Supported |
| Wireless Android Auto | Supported |
| Audio Transmission Method | Original car Bluetooth |
| Reverse Camera Support | Yes |
| Warranty | 1 Year |
Bluetooth Specifications:
- Standard: Bluetooth V2.1+EDR
- Frequency Band: 2402MHz-2480MHz
- Interface: UART
- Antenna: External antenna interface
WiFi Specifications:
- Frequency Band: 2.4GHz & 5.8GHz
- Interface: USB
- Antenna: External antenna interface
3. Package Contents
Please check the package contents carefully upon receipt. If any items are missing or damaged, please contact customer support.
- Main Module Board
- Power Cable
- RCA/USB Cable
- Data Cable
- BT & WiFi Antenna
- Microphone Cable
- FPC (Flexible Printed Circuit) Cables

Image: Components included for PCM3.1 installation, showing the main board, various cables, and antennas.

Image: Components included for PCM4.0 installation, showing the main module, power cable, RCA/USB cable, LVDS cables, and WiFi antenna.
4. Setup and Installation
Note: Installation requires disassembling parts of your car's dashboard. If you are not comfortable with this process, it is highly recommended to seek professional installation.
General Installation Overview:
The module connects between your car's OEM head unit and the display. It involves connecting FPC cables to the LCD module and main PCBA, and then connecting various power, video, and audio cables to the module.

Image: Visual representation of product features including screen mirroring, USB media playback, front/rear camera support, and online music.
Installation Steps (PCM3.1 Specific - Refer to PDF for detailed diagrams):
- Disassembly: Carefully remove the car's head unit and display panel according to your Porsche model's service manual.
- LCD Module Connection: Connect the provided FPC cables from the LCD module to the main PCBA of the OEM head unit. Ensure secure connections.
- Main Module Board Placement: The main module board is typically installed behind the car's display unit.
- Wiring Connections:
- Connect the main power cable to the OEM connector.
- Connect the USB expansion cable for USB flash drive, mobile phone, and software updates.
- Connect front video input (FRONT-CVBS) and reversing video input (REVER-CVBS) if using aftermarket cameras.
- Connect CAN 12V for camera power and REVERSE for reverse detection.
- Connect the audio output to the car's speaker system.
- Connect the external microphone cable.
- Transfer the original fiber optic cable from the car's harness to the corresponding connector on the module's harness.
- Testing: Before reassembling the dashboard, power on the car and test all functionalities (Carplay, Android Auto, cameras, audio).
- Reassembly: Carefully reassemble all dashboard components.
For PCM3.1 Installation Video: The original user manual PDF (page 1) contains a QR code for a PCM3.1 installation video. Please scan that QR code for visual guidance.
Switching to the Module's Interface:
To switch between the original car system and the Carplay/Android Auto interface, press and hold the "INFO" button on your car's console. This will toggle between the OEM UI and the Add-on UI.
5. Operating Instructions
5.1 Original Car Button Controls
The module integrates with your Porsche's existing controls for a seamless user experience.
Steering Wheel Controls:
- Phone Button (Left): Make and receive calls.
- Phone Button (Right): Short press to hang up a call; long press to activate Siri/Voice Assistant.
- Long Press (3 seconds) on Phone Button: Switches the system (e.g., between OEM and module interface).
Center Console Controls:
- Audio Channel Switching: Use relevant buttons to switch audio sources.
- Phone Answering/Hang Up: Use the dedicated phone buttons.
- Volume Control: Rotate the knob left/right to adjust volume. Press and hold for 10 seconds to reset the system.
- Track Navigation: Use the forward/backward buttons for previous/next song.
- INFO Button: Long press to switch between the original car system and the module's interface.
- Rotary Knob: Left and right rotation for menu navigation.
5.2 Connecting Wireless Apple Carplay
- On the module's interface, navigate to Wireless CarPlay Settings.
- Ensure Wireless CarPlay Connection is ON.
- Select Discover and connect devices.
- On your iPhone, go to Settings > Bluetooth.
- Search for the device named "CX_BTxxxx" (the specific name will be displayed on the car screen).
- Tap to connect and confirm the pairing code displayed on both devices.
- Once paired, select "Use CarPlay" on your iPhone.
Note: Your iPhone must be fully Bluetooth matched. The wireless Carplay connection will finalize when Wi-Fi is enabled on your phone. Carplay will connect automatically on subsequent uses.
Tip: For the first connection, you can connect via USB cable. Your iPhone will prompt you to enable wireless Carplay. After about 15 seconds, disconnect the USB cable, and wireless Carplay will connect automatically.
5.3 Connecting Wireless Android Auto
- On the module's interface, navigate to Wireless CarPlay Settings.
- Select Discover and connect devices.
- On your Android phone, go to Settings > Bluetooth.
- Search for the device named "CX_BTxxxx" (the specific name will be displayed on the car screen).
- Tap to connect and confirm the pairing.
- Once successfully paired, the Android Auto interface will appear on your car screen.
Tip: For the first connection, you can connect via USB cable. Your Android phone will prompt you to enable wireless Android Auto. After about 15 seconds, disconnect the USB cable, and wireless Android Auto will connect automatically.

Image: Demonstrates the interfaces for Wireless Apple Carplay, Wireless Android Auto, AirPlay (for iPhone), and Autolink (for Android).
5.4 Function Operation Description
- Screen Mirroring: Supports mirroring for Apple (AirPlay) and Android (Autolink) phones. Connect via USB cable for initial setup or wired mirroring.
- USB Media: Insert a USB disk to automatically access the USB player interface. Supports lossless audio and 720p video playback.
- Camera Support: Supports original car's rear-view camera, aftermarket rear-view cameras (CVBS/AHD), and front-view cameras (configurable).
- 360 Panorama: Supports expansion for aftermarket 360 panorama systems (CVBS/AHD).
- Audio Settings: Independent EQ adjustment, music, and navigation volume control.
- Original MIC: Utilizes the original car's microphone with automatic correction for calls.
- Bluetooth Call: Supports the original car's Bluetooth call function.
- AUX In: Functionality to expand digital TV.
- Baidu CarLife: Wired Baidu CarLife support (requires activation in factory settings, password: 0301).
5.5 System Settings
- Automatic Echo Cancellation: If you experience echo during calls, go to Audio Settings and enable "Automatically eliminate the echo." Adjust your original car's volume to 50-70 for optimal performance.
- Language Settings: Select your preferred language from the installation setting interface.
- Audio Settings: Adjust main volume, navigation volume, in-call volume, ringer volume, and voice assistant volume. Default values are recommended.
- Advanced Features: Configure rear view settings, including aftermarket/original camera selection and AHD camera type/frame rate.
- UI Settings: Customize driver position and wallpaper.
6. Maintenance
To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to gently wipe the car's display screen. Avoid abrasive cleaners or solvents that could damage the screen or module components.
- Avoid Liquids: Do not expose the module or car's display to water or other liquids.
- Temperature: Operate the device within the specified temperature ranges to prevent damage.
- Software Updates: Keep the module's software updated to benefit from the latest features and bug fixes. Refer to the system upgrade section for instructions.
7. Troubleshooting (Common Faults Investigation)
- After-sale screen blurred/indistinct: Check LVDS cable connection to the host. Ensure good contact.
- Original car sound normal, but Carplay has no sound:
- Ensure Carplay sound channel is selected as the original car AUX.
- If still no sound, play music from the aftermarket system, then switch to AUX to activate it.
- Echo during calls: Resolve by enabling "Automatic echo cancellation" in Audio Settings.
- No sound in Carplay music or calls: Check if the sound is routed through the USB AUX channel. Ensure connection to original car Bluetooth or mobile phone.
- Carplay connected, but screen is black: Turn off mobile Wi-Fi and Bluetooth. Check if the installation interface displays normally. If issues persist, contact support.
- Module fails to reverse (camera not showing): Check settings for reverse camera activation.
8. System Upgrade
To upgrade the system software, follow these steps:
- Prepare USB: Copy the upgrade files (ISPBOOOT.BIN and OSU_SETTITINGS folder or Update file) to the root directory of a USB disk.
- Insert USB: Insert the USB disk into the module's USB port.
- Navigate to Upgrade Menu: From the main interface, go to Settings > Information > About Version > Update.
- Start Upgrade: Select the corresponding file and start the upgrade process.
Important: Do not power off the device or remove the USB disk during the upgrade process. The USB will be automatically read after the upgrade is complete.
9. User Tips
No specific user tips were available from the provided data (reviews or Q&A). For best performance, ensure your smartphone's operating system is up-to-date and that the module's firmware is also current.
10. Warranty and Support
CARABC products undergo strict functional and performance tests to ensure quality. All products come with a one-year warranty service from the date of purchase.
Warranty Exclusions:
The following conditions are not covered by the free warranty service:
- Damage occurring after the free warranty period.
- Scratches, dirt, or deformation of the product's appearance.
- Inconsistent warranty card/purchase certificate with the product model, or altered marks.
- Unclear or missing bar code on the host machine body.
- Damage caused by improper use, maintenance, repair, or modification not in accordance with the product manual.
- Damage due to force majeure (e.g., fire, flood, traffic accident, lightning, earthquake).
Customer Support:
For assistance, please contact CARABC Official Store via WhatsApp: +86 18923410098. Please have your purchase details ready when contacting support.