1. Introduction
Thank you for choosing the Herdio 6.5 Inch Marine Speaker. This speaker is designed to deliver high-quality audio in challenging marine and outdoor environments. Featuring a 2-way design and 120W maximum power handling, it is built to be waterproof and weather-resistant, ensuring reliable performance for your boat, ATV, UTV, or other outdoor applications.
Image 1: Herdio 6.5 Inch Marine Speaker in a marine setting.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Keep this manual for future reference.
- Ensure all wiring is correctly connected to prevent electrical hazards or damage to the speaker and audio system.
- Do not expose the speakers to extreme temperatures or direct sunlight for prolonged periods, as this may affect performance and lifespan.
- While the speakers are waterproof (IP66 rated), they are not designed for submersion. Avoid high-pressure water jets directly on the speaker cones.
- Operate the speakers at appropriate volume levels to prevent hearing damage and ensure awareness of your surroundings.
3. Package Contents
Please check that all items are present in your package:
- 2 x Herdio 6.5 Inch Marine Speakers
- Mounting Hardware (screws, etc.)
- Speaker Wire (may vary by package)
- Instruction Manual (this document)
Image 2: Herdio 6.5 Inch Marine Speakers (White).
4. Setup and Installation
4.1. Mounting Considerations
Choose a suitable location for your marine speakers, ensuring they are securely mounted and have adequate clearance. Consider factors such as sound dispersion, protection from direct impact, and proper drainage in marine environments.
Image 3: Herdio 6.5 Inch Marine Speaker Dimensions.
- Overall Diameter: 7.09 inches (18 cm)
- Overall Depth: 3.35 inches (8.5 cm)
- Mounting Depth: 2.48 inches (6.30 cm)
4.2. Wiring the Speakers
Proper wiring is crucial for optimal performance and safety. Ensure your audio source (amplifier/head unit) is turned off before making any connections.
- Identify the positive (+) and negative (-) terminals on the back of each speaker. The positive terminal is typically marked in red, and the negative in black.
- Connect the positive (+) speaker wire from your amplifier/head unit to the red (+) terminal on the speaker.
- Connect the negative (-) speaker wire from your amplifier/head unit to the black (-) terminal on the speaker.
- Ensure all connections are secure and free from short circuits.
Image 4: Speaker Wiring Diagram (Red+ and Black-).
5. Operating Instructions
5.1. Powering On
Once properly installed and wired, power on your audio source (amplifier/head unit) to activate the speakers.
5.2. Bluetooth Pairing
To connect your smart device via Bluetooth:
- Ensure the speaker system is powered ON. You should hear a tone indicating it is ready for pairing.
- On your smart device, go to its Bluetooth settings.
- Look for "Herdio" in the list of available devices and select it to connect.
- No password is typically required. If prompted, enter "0000" (four zeros).
- You will hear another indication tone once a successful connection is established. You are now ready to play music.
5.3. AUX Connection
For a wired connection, connect an AUX cable from your audio source's output to the AUX input on your amplifier/head unit, which then feeds audio to the speakers.
6. Maintenance
- Cleaning: Clean the speakers with a soft cloth dampened with mild soap and water. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the speaker's finish and waterproof seals.
- Waterproofing: Regularly inspect the speaker's mounting and connections to ensure all seals are intact and secure, maintaining its IP66 waterproof rating.
- Corrosion: In marine environments, periodically check for signs of corrosion on terminals and connections. Clean any corrosion promptly to ensure optimal electrical contact.
Image 5: IP66 Marine Grade Waterproof and All-Weather Performance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speakers | No power to amplifier/head unit; incorrect wiring; audio source not playing. | Check power supply to your audio system. Verify all speaker wire connections (Red+ to Red+, Black- to Black-). Ensure your audio source is playing and volume is up. |
| Bluetooth pairing fails | Speakers not in pairing mode; Bluetooth disabled on device; interference. | Ensure speakers are powered on and ready for pairing. Turn off and on Bluetooth on your smart device. Move closer to the speakers. Try re-pairing. |
| Distorted or poor sound quality | Loose connections; damaged speaker wire; amplifier overload; low-quality audio source. | Check all wiring for secure connections. Inspect speaker wires for damage. Reduce volume or check amplifier specifications. Use a high-quality audio source. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Herdio |
| HERDIO Model | HMS-6005W |
| Speaker Type | In-Ceiling Speaker (Note: Product is marine-grade, suitable for outdoor/boat use) |
| Woofer Size/Full-Range Size | 6.5" |
| Communication | AUX, Bluetooth |
| Bluetooth Version | 5.0 |
| Input Power (W) | 100-199 W (Max 120W) |
| Output Voltage | 100 W |
| Impedance | 4 Ohm |
| Frequency Range | 60Hz-23KHz (Also stated as 60Hz-15KHz in image) |
| Sensitivity | 89dB (Also stated as 91dB in image) |
| Waterproof | Yes (IP66 Marine Grade) |
| Channels | 2 (2.0) |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 2 |
| Maximum wireless range | 10m-20m |
| Weight | 1800g (1.8kg) |
| Voltage range | Low voltage non-USB (below 75V DC, below 50V AC) |
| Cabinet Material | Plastic |
| Sabwoofer cabinet material | Plastic |
| Mid-range material | Metal |
| Woofer/Widerange material | Other |
| Tweeter material | Other |
| Use | Home (Note: Designed for marine/outdoor use) |
| Number of devices connectable simultaneously | 2 |
| Sound Mode | Stereo Sound Mode |
| Active Noise-Cancellation | Active |
| Wi-Fi Music | Apple Music |
| Intelligent Personal Assistant | NONE |
| Power Source | None (Powered by external amplifier/head unit) |
| Battery | No |
| Remote Control | No |
| Support APP | No |
| Support Apt-x | No |
| Support Memory Card | No |
| Built-in Microphone | No |
| Display Screen | No |
| Touch Screen | No |
| Inbox adaptor | No |
| High-concerned chemical | None |
| Origin | Mainland China |
Note: Some specifications may have slight variations depending on the production batch or specific model variant. The 'Speaker Type' and 'Use' attributes from the product data may refer to a general category, but the product is specifically designed and marketed as a marine/outdoor speaker.
Image 6: Key Specifications for Herdio Marine Speakers.
9. User Tips
- Secure Installation: For marine and outdoor use, ensure the speakers are mounted very securely to withstand vibrations and movement.
- Water Protection: While waterproof, consider adding additional sealant around mounting holes if installing in areas prone to heavy splashing or rain to further protect the mounting surface.
- Connection Check: Periodically check all wiring connections for tightness and signs of corrosion, especially after exposure to saltwater or harsh weather.
10. Frequently Asked Questions (FAQ)
- Q: Does this model have 150 watts?
- A: The Herdio 6.5 Inch Marine Speaker (HMS-6005W) has a maximum power handling of 120W. Please refer to the specifications section for detailed power information.
11. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact Herdio customer service or refer to the official Herdio website.
Additional item guides and documents may be available for download. You can check for these resources at the following link: View Item Guides & Documents (PDF).