Introduction
The AVATTO WPM20 WiFi 6 Mini Smart Energy Meter Module is designed to monitor and manage the power consumption of your electrical appliances. This smart device integrates with popular smart home platforms like Tuya, Smart Life, Alexa, Google Home, and Yandex Alice, allowing for remote control and voice commands. It provides real-time power data, helping users keep track of energy usage and reduce electricity costs.
Safety Information
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water or hot environments.
- Install the device away from strong signal sources such as microwave ovens, which may cause signal interruption and abnormal operation.
- Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair, or modify the device.
Product Overview
Package Contents
- AVATTO WPM20 WiFi 6 Mini Smart Energy Meter Module
- User Manual (this document and a PDF version)
For a detailed view of the product, refer to the image below:
Specifications
| Attribute | Value |
|---|---|
| Product Type | Smart WiFi6 Energy Monitor |
| Input | AC 110-240V 50/60Hz |
| Output | Max 16A/3840W @240V AC |
| WiFi Signal Replication | Support |
| WiFi Protocol | WiFi 6 |
| Operation Range | <100m |
| Dimensions (W*D*H) | 34*29*17 mm |
| IP Rating | IP20 |
| Certificates | CE, RoHS |
| Smart Home Platform | Tuya, Smart Life |
| Voice Control Support | Alexa, Google Home, Yandex Alice |
Dimensions of the module:
Installation
WARNING: Turn off the power supply before carrying out any wiring. Installation should only be performed by a qualified electrician.
- Turn off the power supply before wiring.
- Connect wires according to the wiring diagram provided below.
- Insert the module into the junction box or meter box.
- Turn on the power supply and follow the app configuration instructions.
Refer to the following diagrams for installation methods and wiring details:
App Configuration (APP User Manual)
1. Download and Register the App
- Scan the QR code (refer to the PDF manual for QR code) or search for "Smart Life App" in the App Store or Google Play to download the app.
- Log in or register your account using your mobile number or email address. Enter the verification code sent to your mobile/email, then set your login password. Click "Create Family" to proceed.
2. Pairing the Device
- After wiring the switch module, press the reset key for about 10 seconds, or turn on/off the traditional switch 5 times until the indicator light inside the module flashes quickly for pairing.
- The device supports multi-protocol matching (WiFi/Bluetooth). Turn on Bluetooth on your phone. The app should automatically detect the device. Follow the on-screen instructions for pairing.
- The connection process may take 10-100 seconds, depending on your network conditions.
3. Control and Integration
- Once connected, you can control the device via your mobile phone using the Smart Life or Tuya APP.
- Connect to Amazon Alexa, Google Assistant, or Yandex Alice for voice control.
- Share devices with family members for shared control.
For visual guidance on the app setup, please refer to the full PDF user manual: AVATTO WPM20 User Manual (PDF)
Operating Instructions
Power Monitoring
The AVATTO WPM20 module allows you to monitor power consumption in real-time through the Smart Life or Tuya app. You can view voltage, current, and power statistics at any time.
Remote Control
Use the Smart Life or Tuya app to remotely turn connected appliances on or off from anywhere.
Voice Control
Integrate the module with Amazon Alexa, Google Home, or Yandex Alice to control your appliances using voice commands.
Maintenance
- Ensure the device is kept clean and free from dust.
- Do not use harsh chemicals or abrasive cleaners on the device.
- Regularly check wiring connections for any signs of wear or looseness (ensure power is off before inspection).
Troubleshooting (FAQ)
- Q1: Why can't I configure the switch module?
- A1: Check the following:
- Ensure the device is powered on.
- Make sure your mobile and the switch module are on the same 2.4 GHz WiFi network.
- Verify that your internet connection is stable and strong.
- Confirm that the password entered in the App is correct.
- Ensure the wiring is correct according to the installation diagrams.
- Q2: What devices can be controlled by the module?
- A2: Most household electrical appliances can be controlled, allowing you to turn them on/off remotely.
- Q3: What happens if the WiFi goes off?
- A3: You can still control the device using your traditional wall switch. Once WiFi reconnects, the module will automatically rejoin your network.
- Q4: What should I do if I change my WiFi network or password?
- A4: You will need to reconnect the device to the new WiFi network by following the app configuration steps again, as per the App User Manual.
- Q5: How do I reset the device?
- A5: Power cycle the device 5 times, or press the reset button for about 10 seconds until the indicator light flashes quickly.
User Tips
- Ensure Stable WiFi: A stable 2.4GHz Wi-Fi connection is crucial for optimal performance and reliable remote control.
- Check Wiring Carefully: Double-check all wiring connections during installation to prevent issues and ensure safe operation.
- Explore App Features: Take time to explore all the features within the Smart Life or Tuya app, including scheduling, automation, and detailed power statistics, to maximize the benefits of your smart energy meter.
Warranty and Support
For warranty information and technical support, please contact the manufacturer, AVATTO, or your point of purchase. Keep your purchase receipt as proof of purchase.