liitokala LII-500

Contents

LiitoKala LII-500 Smart Universal LCD Battery Charger User Manual

Model: LII-500

Introduction

Thank you for using our product, Lii-500. It is a high-end smart charger equipped with 10 major functions, including 4-channel independent charging, battery capacity detection, battery internal resistance detection, anti-reverse connection, short circuit protection, overcharge protection, temperature control protection, a function that prevents charging at voltages between 1.65V and 2.2V, USB 5V output, and zero-volt activation of the battery. Additionally, it can automatically and timely monitor the battery (charging and detection) process.

The Lii-500 charger can accommodate a wide range of cylindrical lithium-ion batteries of different models, as well as cylindrical nickel-hydrogen batteries such as AA and AAA. It is widely used for battery charging in electronic products like high-intensity flashlights, power tools, instruments, digital cameras, and more. With its safe operation, portability, and powerful functionality, it serves as an excellent assistant for both home use and travel.

Safety Warnings

  • This charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries. Do not attempt to charge lithium iron phosphate batteries.
  • Before use, please carefully refer to the instruction manual and pay attention to the recommended charging current for the rechargeable battery. Do not charge it beyond the recommended current.
  • Please do not use power adapters other than the specified DC 12V/2.0A.
  • The charger may generate heat during charging and discharging. Exercise caution to avoid burns.
  • When discontinuing use, always unplug the power supply and remove the battery.
  • This device is intended for indoor use only under normal conditions.
  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

Setup

Unpacking and Inspection

Carefully unpack the charger and check for any visible damage. Ensure all components are present. If your package did not include a power adapter, you will need to acquire a compatible DC 12V/2.0A adapter.

Power Connection

  1. Connect the DC 12V/2.0A power adapter to the DC 12V input port on the back of the charger.
  2. Plug the power adapter into a suitable wall outlet.
  3. Upon connection, all LCD screens on the charger will briefly light up.

Operating Instructions

Controls Overview

The charger features six buttons for operation:

  • MODE Button: Used to select the operating mode (CHARGE, FAST TEST, NOR TEST).
  • CURRENT Button: Used to select the charging or discharging current.
  • 1, 2, 3, 4 Buttons: Independent selection and data viewing buttons for each battery slot.
LiitoKala LII-500 Charger Appearance Diagram

Figure 1: Charger Appearance Diagram (Channel Query, Mode Selection Key, Input, USB Output, LCD Display, Current Selection Key)

General Operation

  1. In any case, press and hold the MODE button for 3 seconds to change between CHARGE (charging), FAST TEST, or NOR TEST (capacity testing) modes.
  2. After selecting the mode, lightly press the corresponding function button (1, 2, 3, or 4) again within 8 seconds to make further changes (e.g., current selection).
  3. After selecting the desired function, the charger will enter the working state after 8 seconds.
  4. In the working state, you can lightly press the (1, 2, 3, 4) buttons to view reference values of current (mA), capacity (mAh), voltage (V), time (h), and internal resistance (mR) data for each slot.

Charging Mode (CHARGE)

  1. When the charger is powered on, if no battery is inserted, it will display "Null". If a damaged battery is inserted, it will also display "Null".
  2. Place a compatible battery into a slot. The charger will measure the internal resistance in about 3 seconds and then automatically enter CHARGE mode, defaulting to 500mA.
  3. Within 8 seconds, you can press the CURRENT button to select 300mA, 500mA, 700mA, or 1000mA. The system will lock the selected current after 8 seconds. If no selection is made, it defaults to 500mA.
  4. In CHARGE mode, you can switch between independent charging or different current options, and mix charging of different battery types. Press the 1, 2, 3, or 4 button, then MODE to change the mode, and CURRENT to change the current for that slot.
  5. It is recommended to use 500mA charging for safety, especially if rapid charging is not required.
  6. Once the battery is fully charged, the LCD will display "End".

Capacity Testing Modes

The charger offers two modes to test battery capacity: FAST TEST and NOR TEST.

1. FAST TEST (Rapid Capacity Testing Mode)

This mode quickly detects battery capacity by discharging the battery first, then fully charging it and recording the charging capacity.

  1. After inserting batteries and powering on, gently press the MODE button within 8 seconds to select FAST TEST mode.
  2. Press the CURRENT button to choose the desired charging current. The system will lock your selection after 8 seconds.
  3. If you select 300mA or 500mA charging current, the system defaults to a 250mA discharge current.
  4. If you select 700mA or 1000mA charging current, the system defaults to a 500mA discharge current.

2. NOR TEST (Normal Operation Range Test)

This mode provides a more thorough capacity detection by fully charging the battery, then discharging it to record capacity, and finally fully charging it again.

  1. After inserting batteries and powering on, gently press the MODE button within 8 seconds to select NOR TEST mode. Alternatively, long-press MODE for 2 seconds in any state to enter NOR TEST mode.
  2. Select a charging current (300mA, 500mA, 700mA, or 1000mA) using the CURRENT button within 8 seconds. The system will lock the current after 8 seconds. If no selection is made, it defaults to 500mA charging.
  3. The discharge current will be automatically selected: 250mA for 300mA/500mA charging, and 500mA for 700mA/1000mA charging.
  4. Once fully charged, the system automatically switches to discharge mode. Data during discharge is recorded.
  5. When the screen displays "End", the capacity detection ends, and the displayed parameters are the actual capacity reference values.
  6. The charger will then charge the battery again at the previously selected current until fully charged.

USB 5V Output Function

The LII-500 can also function as a power bank for USB-powered devices.

LiitoKala LII-500 Multifunction Power Bank

Figure 2: Multifunction - Charger can act as a power bank via OUT:5V port.

  1. The USB output provides 5V/1000mA. It is not designed to be connected to another power source via its USB output.
  2. Insert one to four 3.7V lithium batteries into the slots. The charger can then supply power to 5V electronic products via the USB OUT:5V port.
  3. It is recommended to use at least two batteries for USB output.
  4. The USB 5V output is only effective when using 3.7V lithium batteries. It does not work with nickel-hydrogen batteries.

Maintenance

  • Cleaning: Disconnect the charger from power and remove batteries. Use a soft, dry cloth to clean the charger's exterior. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Damage: Do not drop the charger or expose it to moisture.

Troubleshooting

ProblemPossible CauseSolution
LCD displays "Null"No battery inserted, or battery is damaged/incompatible.Insert a compatible battery or try a different battery.
Charger does not power onPower adapter not connected properly or faulty.Check power adapter connection. Ensure it's a DC 12V/2.0A adapter. Try a different outlet.
USB output port not workingIncorrect battery type (e.g., Ni-MH), or no batteries inserted.Ensure 3.7V Li-ion batteries are inserted. USB output is not compatible with Ni-MH batteries.
Charger feels warm during operationNormal operation during charging/discharging.This is normal. The charger has overheat protection. If it feels excessively hot, discontinue use and contact support.

Specifications

FeatureSpecification
Input VoltageDC 12V/2.0A
Li-ion Charging Current4.2V @ 300mA/500mA/700mA/1000mA
Ni-MH Charging Current1.48V @ 300mA/500mA/700mA/1000mA
Discharge Current250mA, 500mA
USB Output5V/1A
Compatible Li-ion Batteries3.7V: 26650, 22650, 18650, 18490, 17670, 17500, 17355, 16340, 14500, 10440
Compatible Ni-MH/Ni-Cd BatteriesAA, AAA, A, SC
Dimensions (L x W x H)162mm x 96mm x 36mm
Output Power≤37.5W
Voltage RangeLow voltage non-USB (below 75V DC, below 50V AC)
Display ScreenYes
Intelligent ChargeYes
Quick ChargeYes
Protection FeaturesOverheat, Short Circuit, Overcharge, Reverse Polarity
LiitoKala LII-500 Protection Features

Figure 3: Built-in Protection Features

User Tips

  • Power Adapter: Some packages may not include a power adapter. Ensure you have a compatible DC 12V/2.0A adapter for operation.
  • Normal Heat: It is normal for the charger to become slightly warm during charging and discharging cycles.
  • Independent Control: Each battery slot operates independently, allowing for different battery types and settings simultaneously.
  • Battery Analysis: This charger is particularly useful for checking the capacity and health of both new and old 18650 batteries.
  • USB Output Limitation: Remember that the USB 5V output function only works with 3.7V Li-ion batteries, not Ni-MH/Ni-Cd batteries.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.