VIEWI P21/5W P21W 1156 BA15S 1157 BAY15D

Contents

LED Car Interior Light Instruction Manual

Models: P21/5W, P21W, 1156 BA15S, 1157 BAY15D

Brand: VIEWI

1. Introduction

Thank you for choosing VIEWI LED Car Interior Lights. These super bright 3535 LED bulbs are designed for various automotive lighting applications, including parking, turn signals, reverse, and tail lights. This manual provides essential information for safe installation, operation, and maintenance of your new LED bulbs.

2. Safety Information

Please read and understand all safety warnings before installation and use.

  • Warning: Always turn off the power to the lamp holder before removing or installing bulbs to prevent electrical shock.
  • Static Electricity: Take precautions to prevent static electricity during installation.
  • Handling: Do not use sharp objects to touch the product.
  • Chemicals: Avoid contact with strong chemicals such as strong acid and alkali.
  • Installation: During installation, avoid bending the part just at the position of the LED components to prevent damage and ensure product longevity.

3. Product Overview

The VIEWI LED Car Interior Lights are designed for superior brightness and durability. They are compatible with a wide range of vehicle voltages and bulb types.

Two LED bulbs, one white and one red, shown side-by-side with their respective lights illuminated below.

Figure 1: Illuminated Red and White LED Bulbs

Dimensional drawing of the LED bulb, showing a length of 50mm, a base diameter of 15mm, and a body diameter of 20mm.

Figure 2: LED Bulb Dimensions

Video 1: Product Showcase of LED Bulbs

4. Specifications

Feature Specification
Item Type LED bulbs (Car Bulb)
Model Number new001
Compatible Bulb Types 1156 (BA15S, P21W, 1156A, 1156NA, 87, 93, 97, 97A, 97NA, 199, 631, 1073, 1095, 1141, 1195, 1295, 2396, 3497, 5007, 5008, 7506, 12088, 1295NA)
1157 (BAY15D, 1016, 1034, 1157A, 1178A, 1196, 2057, 2057A, 2357, 2357A, 2357NA, 2397, 3496, 7528, 94)
LED Chip Model SMD3535
LED Chip Quantity 39 pcs
Emitting Color Options Yellow / Cool White (6000K to 6500K) / Red
Voltage DC 12V to 24V (compatible with 11-50V systems)
Wattage 9W/Bulb
Luminous Flux 249 Lumens & Under
Beam Angle 360°
Average Life (hrs) More than 30000 hours
Certification CE, ROHS
Dimensions (approx.) Length: 50mm, Base Diameter: 15mm, Body Diameter: 20mm
Power Tolerance 3%
Is Smart Device No
Image showing a red LED bulb connected to a power supply displaying 12.0V, and a white LED bulb connected to a power supply displaying 24.0V, demonstrating voltage compatibility.

Figure 3: Voltage Compatibility Demonstration (12V and 24V)

5. Installation

Follow these steps to install your new LED bulbs:

  1. Turn off Power: Ensure the vehicle's ignition is off and the power to the specific lamp holder is disconnected.
  2. Remove Old Bulb: Carefully remove the old light bulb from the lamp holder.
  3. Install LED Bulb: Insert the new LED bulb into the lamp holder. Ensure it is seated correctly and securely. Do not force the bulb or bend the LED components.
  4. Test: Turn on the power to test the new LED bulb.

For visual guidance, refer to the product images showing the bulb types and dimensions.

6. Operating Instructions

These LED bulbs are designed for direct replacement of incandescent bulbs in compatible sockets. Once installed, they operate automatically with your vehicle's lighting system.

  • Voltage: The bulbs are compatible with DC 12V to 24V systems.
  • Function: Depending on the specific bulb type (P21/5W, P21W, 1156 BA15S, 1157 BAY15D), they function as parking lights, turn signal lights, reverse lights, or tail lights.
  • Brightness: Provides super bright illumination for enhanced visibility.

7. Maintenance

VIEWI LED bulbs are designed for long-lasting performance with minimal maintenance.

  • Cleaning: If necessary, gently wipe the bulb surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the bulbs for any signs of damage or loose connections.
  • Replacement: Due to their long lifespan (over 30,000 hours), frequent replacement is not expected. Replace only if the bulb fails to illuminate.

8. Troubleshooting

Problem Possible Cause Solution
Bulb does not light up Incorrect installation, loose connection, incorrect voltage, or faulty bulb. 1. Ensure the bulb is correctly inserted and securely connected.
2. Verify the vehicle's voltage is within the DC 12V-24V range.
3. Test the bulb in another compatible socket if available.
4. If the issue persists, the bulb may be faulty and require replacement.
Bulb flickers Unstable voltage, loose connection, or compatibility issue (e.g., CANBUS system). 1. Check for loose connections.
2. Ensure stable power supply.
3. For vehicles with CANBUS systems, an additional load resistor might be required (not included) to prevent flickering or error messages.
Error message on dashboard CANBUS system detecting lower power draw from LED bulb. Install a compatible CANBUS decoder or load resistor (not included) to simulate the power draw of an incandescent bulb.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. However, general tips for LED car lights include:

  • Double-check Compatibility: Always confirm the correct bulb type (e.g., BA15S, BAY15D) and voltage for your vehicle before purchasing and installing.
  • Polarity: Some LED bulbs are polarity sensitive. If the bulb does not light up, try rotating it 180 degrees in the socket.
  • Heat Dissipation: Ensure adequate space around the bulb for proper heat dissipation, although these bulbs are designed for efficient cooling.

10. Warranty and Support

This product comes with a 1-year warranty period from the date of purchase.

For any issues or support, please refer to the official user manual PDF available online: View User Manual (PDF). You may also contact the seller directly through the platform where you made your purchase.

© 2023 VIEWI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.