1. Introduction
Thank you for choosing STUXMOS LED Solar Cherry Blossom String Lights. These decorative lights are designed to enhance your outdoor spaces with beautiful illumination, powered entirely by solar energy. They are perfect for gardens, patios, Christmas, weddings, and other party decorations. This manual provides essential information for safe and effective use of your new solar string lights.
2. Safety Information
- Ensure the solar panel is installed in a location that receives direct sunlight for optimal charging.
- Do not attempt to open or modify the solar panel or light components, as this may damage the product and void any potential support.
- Keep the product away from open flames or extreme heat sources.
- This product is designed for outdoor use and is water-resistant, but avoid submerging it in water.
- Keep out of reach of children.
3. Package Contents
- Solar Panel with integrated battery
- Ground Spike (2 parts)
- LED Cherry Blossom String Lights
4. Specifications
| Attribute | Value |
|---|---|
| Product Name | Solar Lights |
| Brand Name | STUXMOS |
| Model Number | 01YAYA |
| Material | ABS+PVC |
| Charging Time | 6-8 hours (direct sunlight) |
| Lighting Time | Approx. 8 hours (fully charged) |
| Installation Method | Assembly |
| Batteries Included | Yes |
| Bulbs Included | No (integrated LEDs) |
| Dimmable | No |
| Certification | CE |
| Emitting Colors Available | Warm Light, White Light, Multicolor, Purple Light |
| Wattage / Length / LED Count Options | 5M 20LEDs (0-5W), 7M 50LEDs (6-10W), 12M 100LEDs (11-15W) |
| Package Length | 25 cm |
| Package Width | 18 cm |
| Package Height | 9 cm |
| Package Weight | 0.29 kg |
5. Setup Instructions
Follow these steps to set up your solar string lights:
- Assemble the Ground Spike: Connect the two parts of the ground spike together.
- Attach Solar Panel: Securely attach the solar panel to the assembled ground spike. The panel can be rotated 90 degrees to adjust for optimal sun exposure.
- Remove Protective Film: Carefully peel off the protective film from the solar panel surface.
- Initial Charging: Before first use, ensure the solar panel is exposed to direct sunlight for at least 12 hours (daytime) to fully charge the internal battery. This ensures enough power for initial operation.
- Placement: Insert the ground spike with the solar panel into soft ground in a location that receives maximum direct sunlight throughout the day. Ensure no obstructions (like trees or buildings) block sunlight from reaching the panel.
- Arrange Lights: Unwind the string lights and arrange them as desired in your garden, patio, or other outdoor area.


6. Operating Instructions
Your solar string lights operate automatically based on light conditions and selected mode.
Automatic Operation:
- The solar panel will only absorb sunlight and store electricity when the ON/OFF switch is in the 'ON' position.
- During the day, if there is sufficient light, the system automatically stores electricity.
- When it gets dark at night, the lights will automatically turn on.
Buttons:
- ON/OFF Switch: Located on the back of the solar panel. Press to turn the lights ON or OFF. Ensure it is ON for charging and automatic operation.
- MODE Button: Located on the back of the solar panel. Press this button to cycle through the 8 different lighting modes.
Lighting Modes:
The lights feature 8 distinct modes to suit your preference:
- Combination
- In Waves
- Sequential
- Slo-Glo (Flicker)
- Chasing/Flash (Show flash)
- Slow Fade (Dream change)
- Twinkle/Flash (Fast Flash)
- Steady On (Bright and extinguished - likely means steady on)

Product Demonstration Video:
7. Maintenance
- Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Ensure the solar panel remains unobstructed by leaves, snow, or other objects that could block sunlight.
- Check the wiring periodically for any signs of damage.
8. Troubleshooting
- Lights do not turn on at night:
- Ensure the ON/OFF switch on the solar panel is in the 'ON' position.
- Verify the solar panel is receiving 6-8 hours of direct sunlight daily. Relocate if necessary.
- Check for any obstructions (e.g., shade from trees, buildings) blocking the solar panel during the day.
- Allow for an initial full charge of 12 hours in direct sunlight before first use.
- Lights stay on for a short duration:
- The battery may not be fully charged. Ensure the solar panel receives adequate direct sunlight for 6-8 hours.
- Clean the solar panel surface to ensure maximum light absorption.
- Weather conditions (overcast days) can affect charging efficiency.
9. User Tips
- For the most vibrant and consistent illumination, ensure your solar panel is positioned to capture maximum direct sunlight throughout the day.
- Experiment with different lighting modes to find the perfect ambiance for your occasion.
- Consider using multiple sets of lights to cover larger areas or create a more dramatic effect.
10. Frequently Asked Questions (FAQ)
- Q: Are these lights waterproof?
A: The lights are designed for outdoor use and are water-resistant, meaning they can withstand rain and splashes. However, they should not be submerged in water. - Q: How long do the lights last on a full charge?
A: On a full charge (6-8 hours of direct sunlight), the lights can illuminate for approximately 8 hours. Actual duration may vary based on weather conditions and selected lighting mode. - Q: Can I replace the battery?
A: The product includes integrated batteries. It is not recommended for users to replace the batteries themselves. - Q: Do the lights have a timer function?
A: The lights operate automatically from dusk till dawn once the ON/OFF switch is engaged. There is no specific timer function to set custom on/off times.
11. Warranty and Support
For detailed instructions and diagrams, please refer to the official user manual available as a PDF: STUXMOS LED Solar String Lights User Manual (PDF)
For any product inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Please have your order number and product model (01YAYA) ready when contacting support.