BLALION Motorcycle Locomotive Box Sensor Light User Manual

1. Product Overview

The BLALION Motorcycle Locomotive Box Sensor Light is a magnetic induction light designed to provide illumination in various storage compartments. It features a built-in magnetic ball that automatically triggers the light based on the angle of the box when it's opened or closed.

When the box is opened, the magnetic ball slides down and detaches from the sensing area, activating the circuit and lighting the LED. When the box is closed, the magnetic ball resets, triggering a magnetic sensor to cut off the power and turn off the light.

This light is equipped with a built-in 300mAh battery and supports Type-C charging. Its compact and flat design helps save space, making it ideal for motorcycle seat bins, tail boxes, car armrest boxes, fishing boxes, and camping storage boxes. It uses a single high-brightness imitation lumen LED (100-120LM) for efficient illumination.

2. Package Contents

Ensure all items are present in the package:

• Magnetic induction lighting unit (1)
• Charging cable (White Type-C, 20cm) (1)
• Velcro adhesive tape (54*29*3.5mm) (1)

3. Specifications

Electrical Parameters (using a 300mAh battery)

• Standby power consumption (off): 0.7uA
• Standby power consumption (on): 3.6uA
• Power consumption (on): 80-260mA
• Charging time (0-100%): Approximately 96 minutes

4. Setup and Installation

The product is fixed using the provided Velcro adhesive tape. Follow these steps for installation:

1. Select Location: Choose a suitable location within your motorcycle box, car armrest box, fishing box, or camping storage box. Ensure the chosen spot allows the light to activate and deactivate correctly when the lid/door is opened and closed.
2. Clean Surface: Wipe clean the installation location to ensure proper adhesion.
3. Prepare Adhesive: Tear off the protective film from the Velcro double-sided tape on the back of the light.
4. Affix Light: Affix the light firmly to the cleaned surface.
5. Test Functionality: Before final commitment, test by opening and closing the box to confirm the light turns on and off normally.
6. Charging Access: The Velcro allows the light to be easily peeled off for charging when needed.

5. Operating Instructions

The BLALION Sensor Light operates based on a magnetic induction principle, triggered by movement and orientation.

Operation Logic:

• Power On/Off: Click the designated button on the device to start or stop its operation.
• Automatic Activation (Start State):
  1. When the magnetic light is stationary with the LED facing down, the light is off.
  2. When the magnetic light is tilted at a specific angle (typically when the angle is close to 90 degrees, like opening a lid), the internal magnetic ball pops out of its groove. This removes magnetic force from the sensor, and the light turns on.
  3. If the magnetic ball is not in its specific groove when stationary, the light will turn on when tilted at an angle of 30-320 degrees.
• Automatic Deactivation: When the box is closed, the magnetic ball resets into its groove, triggering the magnetic sensor to cut off power and turn off the light.

6. Maintenance and Charging

Charging the Device:

• The device has a built-in 300mAh lithium battery.
• Connect the provided Type-C charging cable to the device and a 5V power source.
• During charging, a red indicator light will illuminate.
• When the battery is fully charged, the indicator light will turn green.
• A full charge from 0-100% takes approximately 96 minutes.
• The charging process involves three stages: small current pulse charging when empty, constant current charging at 230mA, and trickle charging as the battery approaches 4V.

General Maintenance:

• This product has a sealed design. User disassembly will damage the internal structure and void any potential warranty.
• Keep the device clean and free from excessive dust or debris.

7. Troubleshooting

• Light is dim or not turning on:
  • Check battery level. After about 100 minutes of continuous illumination, the brightness will drop rapidly as the battery empties. At 2.7V, the light may only function as an indicator. Recharge the device fully.
  • Ensure the device is in the 'start' state (powered on).
  • Verify the magnetic ball mechanism is functioning correctly. If the light requires tapping to turn on, the magnetic ball might be stuck or not making proper contact.
• Light turns on unexpectedly or battery drains quickly:
  • The sensor is designed to react to changes in angle. In environments with significant vibrations (e.g., during motorcycle travel), the magnetic ball might shift, causing unintended activation. Consider turning the light off manually when not in use or when vibrations are expected.
• Light does not turn off when the box is closed:
  • Ensure the light is installed in a position where the magnetic ball can properly reset into its groove when the box is closed. Adjust the installation location if necessary.

8. User Tips

• Initial Charge: It is recommended to fully charge the device before its first use to ensure optimal performance and battery calibration.
• Check Package Contents: Upon receiving your product, carefully check all package contents to ensure no parts are missing.
• Mounting Location: When installing, consider the angle of illumination. Some users prefer mounting the light in a way that avoids direct glare, especially if the light is positioned high.
• Battery Life Expectation: The battery provides approximately 100 minutes of continuous illumination. Plan charging accordingly for extended use.
• Charging Cable: The device uses a Type-C charging cable. Ensure you have a compatible 5V power source.

9. Safety and Environmental Information

• Eye Safety: This product is a lighting fixture. Do not look directly at the LED beads at close range with the naked eye, as the strong light may cause temporary or permanent eye damage.
• Battery Disposal: This product contains a lithium battery. At the end of its service life, please dispose of it according to local regulations. Do not discard it with ordinary household waste.
• Product Variations: The parameters in this specification are based on a test sample. Mass-produced products may have slight adjustments. The actual product shall prevail.