1. Introduction
The CooSpo BC26S is a wireless GPS cycling computer designed to provide comprehensive data for your rides. It features a 2.3-inch screen with automatic backlight, dual GPS positioning for accurate tracking, and wireless connectivity with various cycling sensors including speed, cadence, and heart rate monitors. This manual will guide you through the setup, operation, and maintenance of your BC26S cycling computer.

Figure 1: CooSpo BC26S GPS Cycling Computer and included Cadence Sensor.
2. Package Contents
Please check the package to ensure all items are present:
- CooSpo BC26S GPS Cycling Computer
- USB Type-C Charging Cable
- Cycling Computer Mount
- Rubber Bands for Mount Installation
- Cadence Sensor (may vary by package)
- User Manual

Figure 2: Overview of items included in the BC26S package.

Figure 3: Mounting bracket and rubber bands.
3. Charging the Device
Before first use, fully charge the BC26S. The device uses a USB Type-C port for charging.
- Connect the provided USB Type-C cable to the charging port on the back of the BC26S.
- Connect the other end of the USB cable to a DC 5V power adapter (not included) or a computer's USB port.
- The device will indicate charging status on the screen.
A full charge provides up to 20 hours of continuous battery life in GPS-enabled mode.

Figure 4: BC26S with Type-C charging port highlighted. Input: DC 5V, 0.6A.
4. How to Install
Follow these steps to install the BC26S cycling computer on your bicycle handlebars or stem:
- Place the mount base on your handlebar or stem.
- Secure the mount base using the provided rubber bands, ensuring it is tight and stable.
- Align the BC26S computer with the mount, placing it slightly rotated.
- Press down and twist the computer clockwise until it locks securely into place.

Figure 5: BC26S mounted on bicycle handlebars.
6. Display Icons
Understand the various icons displayed on your BC26S screen:
| Icon | Description | Icon | Description |
|---|---|---|---|
| 🔋 | Battery | ⏱️ | Time |
| 📡 | GPS Searching | MAX | Max Data |
| 📶 | GPS Signal Normal | AVG | Average Data |
| ▶️ | In Motion | LAP | Lap Count |
| ⏸️ | Manual Paused | 📜 | History |
| AUTO | Auto Paused | 🔔/🔕 | Alert Sound On/Off |
| 📱 | App Connected | 💨 | Speed |
| ❤️ | Heart Rate | ||
| ⚙️ | Cadence | ||
| ▲ | Current Speed Above or Equal to Average | ▼ | Current Speed Below Average |
7. Setup
7.1. Connect to Bluetooth Sensors
The BC26S is compatible with various Bluetooth cycling sensors (heart rate, speed, cadence).
- Ensure your Bluetooth sensor is active. For example, wear the heart rate strap properly, and activate speed or cadence sensors by rotating the pedals or wheels.
- Long press the ⚙︎ (Down Left) button to enter Settings Mode.
- Short press the ►II (Right) button to enter P1 Sensor Settings. The computer will search for and connect to nearby Bluetooth sensors.
- After connecting, long press ⚙︎ to save and return, or short press ►II to save and move to the next setting.
Note: If you have multiple Bluetooth sensors, keep the ones you are not connecting at a distance or turn them off to ensure the bike computer connects to the correct sensor.

Figure 6: BC26S wirelessly connected to heart rate, speed, and cadence sensors.
7.2. Timezone Setting (P2)
- Long press ⚙︎ to enter Settings Mode.
- Short press ∧ (Up Left) or ∨ (Down Left) to switch to P2 Timezone Setting, then short press ►II to enter.
- Short press ∧/∨ to switch numbers, and short press ►II to switch digit positions.
- Long press ⚙︎ to save and return, or short press ►II to save and move to the next setting.
7.3. Wheel Size Setting (P3)
Setting the correct wheel size is crucial for accurate speed and distance measurements if you are using a speed sensor.
- Long press ⚙︎ to enter Settings Mode.
- Short press ∧/∨ to switch to P3 Wheel Size Setting, then short press ►II to enter.
- Short press ∧/∨ to switch numbers, and short press ►II to switch digit positions.
- Long press ⚙︎ to save and return, or short press ►II to save and move to the next setting.
Refer to common tire sizes and circumferences (in mm) for accurate setting:
| Tire Size | Circumference (mm) | Tire Size | Circumference (mm) | Tire Size | Circumference (mm) |
|---|---|---|---|---|---|
| 12 x 1.75 | 935 | 24 x 2.00 | 1925 | 26 x 1.40 | 2005 |
| 14 x 1.5 | 1020 | 24 x 2.125 | 1965 | 26 x 1.50 | 2010 |
| 16 x 1.5 | 1185 | 26 x 1.75 | 2023 | 27 x 1 | 2145 |
| 18 x 1.5 | 1340 | 26 x 1.95 | 2050 | 27 x 1-1/8 | 2155 |
| 20 x 1.75 | 1515 | 26 x 2.00 | 2055 | 27 x 1-1/4 | 2161 |
| 22 x 1-3/8 | 1770 | 26 x 2.10 | 2068 | 27 x 1-3/8 | 2169 |
| 24 x 1 | 1753 | 26 x 2.125 | 2070 | 27.5 x 1.75 | 2114 |
| 700 x 18C | 2070 | 700 x 23C | 2096 | 700 x 28C | 2136 |
| 700 x 32C | 2155 | 700 x 35C | 2168 | 700 x 38C | 2180 |
7.4. Unit Settings (P4)
- Long press ⚙︎ to enter Settings Mode.
- Short press ∧/∨ to switch to P4 Unit Settings, then short press ►II to enter.
- Short press ∧/∨ to switch between metric (km/h) and imperial (mph) units.
- Long press ⚙︎ to save and return, or short press ►II to save and move to the next setting.
7.5. Alert Settings (P5 Max Speed Alert)
- Long press ⚙︎ to enter Settings Mode.
- Short press ∧/∨ to switch to P5 Max Speed Alert, then short press ►II to enter.
- Short press ∧/∨ to switch the number, and short press ►II to switch the digit position.
- After setting the value, short press ∧/∨ to turn the alert sound ON/OFF.
- Long press ⚙︎ to save and return.
8. Operating the Device
8.1. GPS Positioning
The BC26S uses dual GPS positioning for enhanced accuracy.
- After turning on the bike computer, it will automatically search for GPS.
- For the first GPS fix, wait 30-90 seconds in an open outdoor area. Once fixed, the device date and time will be set automatically.
- When positioning, ensure you are in an open area. Bad weather or dense forests may affect GPS signal. Stay still for 3-5 minutes to acquire more satellites.
- Once GPS is successfully fixed, short press ►II to start riding.

Figure 7: BC26S features dual GPS positioning for improved accuracy.
8.2. Start Riding
- After GPS is fixed, short press ►II to start riding.
- Short press ►II again to pause your ride.
- If speed shows zero or no data during the ride, the computer will automatically enter sleep mode.
- To end a ride, long press ►II.
8.3. Ride Data Display Settings
You can customize the data displayed on your screen:
- After turning on the bike computer, short press ∧ (Up Left) to cycle through the data displayed on the upper screen.
- Short press ∨ (Down Left) to cycle through the data displayed on the lower screen.
8.4. Other Settings and Functions
- Time Setting: After GPS is fixed, the computer automatically calibrates the time. You can also synchronize time via the CoospoRide App.
- Auto Backlight: The backlight automatically turns on between half an hour before sunset and half an hour after sunrise. At other times, it turns off 15 seconds after no operation.
- Auto Sleep / Power Off:
- If not connected to the app and riding has not started, it powers off after 5 minutes of inactivity.
- If not connected to the app and riding is in progress, it enters sleep mode after 15 minutes of inactivity.
- When connected to the app, the computer will not automatically power off.
9. Connect to CoospoRide App
The CoospoRide App allows you to manage settings, view ride data, and sync with platforms like Strava.
- Download the CoospoRide App from Google Play or the App Store.
- Important: Do NOT pair the bike computer in your phone's system Bluetooth settings.
- Turn on the BC26S computer.
- Enable Bluetooth on your phone and grant necessary permissions to the CoospoRide App.
- In the CoospoRide App, navigate to: Me → Devices → Add Devices → Bike Computer → BC26S.
- Select the device ID to connect.
- After connecting, the app will automatically sync bike computer data by default.

Figure 8: Syncing BC26S activity (.fit file) to Strava via the CoospoRide App. Direct USB upload to Strava is not supported.
10. Specifications
| Feature | Specification |
|---|---|
| Wireless Transmission | Bluetooth |
| Display | LCD Screen, 2.3 inches |
| Auto Backlight | Supported |
| Positioning | GPS & BeiDou |
| Weight | Approx. 51 g (including battery, excluding mount) |
| Battery Capacity | 600 mAh |
| Battery Life | Up to 20 hours of riding with GPS |
| Material | PC/ABS + TPU |
| Size | 73.7 x 48.8 x 20.4 mm |
| History Records | Viewable in CoospoRide App (approx. 70 hours of data) |
| Compatible Bluetooth Sensor Types | Speed, Cadence, Heart Rate sensors |
| Certification | CE |
| Origin | Mainland China |
11. User Tips
- GPS Signal: The BC26S quickly finds a GPS signal. For the first fix, ensure you are in an open outdoor area and remain still for optimal acquisition.
- App Connectivity: The CoospoRide app recognizes the device quickly and smoothly. Ensure Bluetooth is enabled on your phone and app permissions are granted.
- Sensor Pairing: While the chest belt (heart rate monitor) is usually recognized immediately, some users report needing a bit of patience and several attempts to recognize speed or cadence sensors. Ensure sensors are active (e.g., by rotating wheels/pedals) during the pairing process.
- Data Sync: The device seamlessly syncs data to the CoospoRide app, which can then be used to upload activities to platforms like Strava.
12. Troubleshooting
- Device Not Turning On: Ensure the device is fully charged. Press and hold the Right button for a few seconds.
- GPS Not Fixing: Move to an open outdoor area away from tall buildings or dense foliage. Remain still for 1-2 minutes. Ensure the device is not indoors.
- Sensor Not Connecting:
- Ensure the sensor's battery is not depleted.
- Activate the sensor (e.g., rotate pedals for cadence, spin wheel for speed, wear HR strap).
- Ensure the sensor is within close proximity to the BC26S.
- Turn off other Bluetooth devices nearby that might interfere.
- Try re-pairing the sensor through the P1 Sensor Settings.
- Data Inaccurate: Check your wheel size setting (P3) if using a speed sensor. Ensure GPS has a strong signal.
- App Not Connecting: Ensure Bluetooth is enabled on your phone, the CoospoRide app has location/Bluetooth permissions, and you are pairing within the app, not phone settings.
13. Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Water Resistance: The BC26S is waterproof, but avoid submerging it in water or exposing it to high-pressure water jets.
- Battery Care: For long-term storage, charge the device to about 50% every few months to preserve battery health.
14. Warranty and Support
14.1. Contact Us
For support or inquiries, please contact CooSpo:
- Website: www.coospo.com
- E-mail: support@coospo.com
14.2. Disclaimer
The information contained in this manual is for reference only. The product described above may be subject to alteration due to the manufacturer's continuing research and development plans, without prior announcement. The manufacturer shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.
14.3. Safety and Regulatory Information
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Warning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Waste Electrical Products: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.
Safety Precautions:
- Do not open or modify the product.
- Do not disassemble or attempt to service this product.
- This product is safe under normal and reasonably foreseeable operating conditions.
- If the product is operating improperly, contact COOSPO support.
- The product must be returned to the manufacturer for any service or repair.