Introduction
Thank you for choosing the REDMI Buds 8 Lite. These true wireless stereo (TWS) earbuds offer an immersive audio experience with advanced features like Active Noise Cancellation (ANC), clear call quality, and extended battery life. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

Package Contents
- REDMI Buds 8 Lite Earbuds (L/R)
- Charging Case
- USB Type-C Charging Cable
- Ear Tips (Sizes L, M, S)
- User Manual (this document)
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and charging case.
- Place the earbuds into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and to a power source.
- The indicator light on the case will show charging status.
The earbuds support fast charging, providing up to 2 hours of music playback from just a 10-minute charge.

2. Pairing with Your Device
The REDMI Buds 8 Lite support Google Fast Pair for quick and convenient connection.
- Ensure your device's Bluetooth is turned on.
- Open the charging case with the earbuds inside and bring it close to your Android device.
- A connection prompt will automatically appear on your device's screen.
- Tap 'Connect' to complete the pairing process.
For other devices or manual pairing:
- Open the charging case. The earbuds will enter pairing mode automatically (or press and hold the function button on the case if available, refer to the full PDF manual for exact button functions).
- On your device, go to Bluetooth settings and select "REDMI Buds 8 Lite" from the list of available devices.

3. Installing the Xiaomi Earbuds App
Download the Xiaomi Earbuds app to unlock more personalized features and optimize your experience.
- Search for "Xiaomi Earbuds" on Google Play Store (for Android) or Apple App Store (for iOS).
- Install the app and follow the on-screen instructions to connect your earbuds.
The app requires Android 6.0 or later (version 1.29.0i and above) or iOS 14.0 or later (version 1.21.0 and above).

Operating Instructions
1. Smart Tap Control
The earbuds feature intuitive touch controls. Default gestures are:
- Double-tap: Play/Pause audio, Answer/End calls
- Triple-tap: Skip tracks
- Long-press: Activate/Deactivate noise control (ANC/Transparency modes)
These gestures can be customized via the Xiaomi Earbuds app.

2. Active Noise Cancellation (ANC)
The REDMI Buds 8 Lite feature up to 42dB wide-frequency active noise cancellation. You can switch between ANC modes (Noise Cancellation, Transparency, Off) by long-pressing the earbuds or through the Xiaomi Earbuds app.

3. Customizable EQ Settings
Use the Xiaomi Earbuds app to adjust the sound profile to your preference. Choose from 5 preset EQ modes or create a custom EQ curve:
- Standard
- Enhance treble
- Enhance bass
- Enhance voice
- Volume boost
- Custom

4. Dual-Device Connectivity
The earbuds can be paired with two devices simultaneously. They intelligently detect incoming calls and switch audio to the corresponding device without manual intervention, allowing seamless transitions between work and entertainment.

5. Clear Calls with Dual-Mic AI ENC
Equipped with dual microphones and an AI noise suppression algorithm, the earbuds accurately distinguish your voice from background noise, ensuring clear and intelligible communication during calls, online meetings, and live streaming.

Maintenance
1. Cleaning
- Regularly clean the earbuds, ear tips, and charging contacts with a soft, dry, lint-free cloth.
- Remove ear tips and clean any earwax or debris from the speaker mesh using a small, soft brush or cotton swab.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
2. Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place away from extreme temperatures and direct sunlight.
3. Battery Care
- To prolong battery life, avoid fully discharging the earbuds and case frequently.
- Charge the device regularly, even if not used for extended periods.
4. Water and Dust Resistance (IP54)
The REDMI Buds 8 Lite are rated IP54 for dust and splash resistance. This means they are protected against limited dust ingress and water splashes from any direction. However, they are not waterproof and should not be submerged in water or exposed to heavy rain. Ensure earbuds are dry before placing them back in the charging case.

Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing | Ensure earbuds are charged. Place them in the case, close, then reopen. Check your device's Bluetooth settings and try reconnecting. If issues persist, try resetting the earbuds (refer to the full PDF manual for reset instructions). |
| No sound from one earbud | Check battery level of both earbuds. Place both earbuds back in the case, close, then reopen. Re-pair with your device. Clean charging contacts. |
| Low volume or poor sound quality | Ensure ear tips provide a good seal. Try different ear tip sizes. Clean speaker mesh. Adjust volume on your device. Check EQ settings in the app. |
| Earbuds not charging | Ensure charging cable is properly connected. Try a different USB-C cable and power adapter. Clean charging contacts on earbuds and inside the case. |
| Touch controls not responding | Ensure your fingers are clean and dry. Try restarting the earbuds by placing them in the case and taking them out. Check for firmware updates in the Xiaomi Earbuds app. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | REDMI Buds 8 Lite |
| Brand | XIAOMI |
| Connectivity | Bluetooth 5.4 |
| Noise Cancellation | Up to 42dB Active Noise Cancellation (ANC) |
| Microphones | Dual-mics with AI Environmental Noise Cancellation (ENC) |
| Driver Size | 12.4mm Titanium-diaphragm Dynamic Driver |
| Earbud Battery Life | Up to 8 hours (single charge) |
| Total Playback Time | Up to 36 hours (with charging case) |
| Charging Port | USB Type-C |
| Fast Charging | 10-minute charge for up to 2 hours playback |
| Water & Dust Resistance | IP54 |
| Audio Codecs | SBC, AAC |
| Material | Plastic |
| Style | TWS In-ear headphones |

User Tips
- Optimal Fit: Experiment with the included ear tip sizes (L, M, S) to find the best fit for your ears. A good seal is crucial for effective noise cancellation and optimal sound quality.
- App Customization: Explore all features within the Xiaomi Earbuds app. Adjusting ANC modes, EQ settings, and customizing touch controls can significantly enhance your listening experience.
- Firmware Updates: Regularly check the Xiaomi Earbuds app for firmware updates. These updates often bring performance improvements, bug fixes, and new features.
No specific user tips were available from buyer reviews or Q&A for this product.
Warranty and Support
For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Xiaomi support website.
For further assistance, troubleshooting, or detailed instructions not covered in this manual, please consult the comprehensive PDF user manual available for download: