Herdio HOS-501

Contents

Herdio HOS-501 5.25 Inch Waterproof Indoor/Outdoor Passive Wired Speakers

User Manual

1. Product Overview

The Herdio HOS-501 speakers are designed for both indoor and outdoor use, offering robust sound quality and durability in various weather conditions. These are passive speakers, meaning they require an external amplifier for operation.

Herdio HOS-501 speaker box with specifications and product image
Figure 1: Herdio HOS-501 Speakers and Packaging
Close-up of a single black Herdio speaker
Figure 2: Herdio HOS-501 Speaker

2. Safety Information

  • Do not submerge the speakers in water. While weather-resistant, they are not designed for submersion.
  • Ensure all wiring connections are secure to prevent electrical hazards and ensure optimal performance.
  • Always use appropriate gauge wire (e.g., 16 gauge for runs up to 50 feet) to avoid signal loss and potential overheating.
  • When mounting, ensure the bracket is securely fastened to a stable surface to prevent the speakers from falling.
  • Disconnect power to the amplifier before making or changing any wiring connections.

3. Setup and Installation

3.1 Speaker Placement

For optimal sound quality, place the speakers no more than eight feet apart from each other and slightly higher than ear level. When installing outdoors, consider placing them under overhangs to provide the best protection from extreme weather. For extended extreme temperatures (below 0 degrees or above 120 degrees Fahrenheit), it is recommended to remove the speakers from their brackets and store them indoors.

Various application scenarios for the speakers including patio, outdoor, swimming pool, and meeting room
Figure 3: Example Speaker Placement Scenarios

3.2 Mounting the Speakers

  1. To remove the bracket from the speaker, turn the knob located on the side of the speaker counter-clockwise.
  2. Fix the bracket to your desired mounting surface using appropriate nails or screws (not included). Ensure the bracket is firmly secured.
  3. Place the speaker onto the fixed bracket and tighten it with the knob by turning it clockwise until secure.
  4. Point the speaker towards the listening area. Once the direction is set, tighten the bracket knobs securely.
  5. When possible, tilt the speakers slightly downwards to enhance longevity and protect them from weather elements.
Video 1: Unboxing, Installation, and Waterproof Test. This video demonstrates how to unbox the speakers, remove and fix the mounting bracket, attach the speakers, and connect the wiring.

3.3 Wiring Connections

These are passive speakers and require an external amplifier (not included) to function. Connect the speakers to your amplifier using speaker cables.

  • Identify the positive (red) and negative (black) terminals on the back of each speaker.
  • Connect the red wire of your speaker cable to the red terminal and the black wire to the black terminal.
  • To make a connection, turn the red and black terminals counter-clockwise to unscrew them. Insert the stripped end of the speaker wire into the small hole in the metal post, then turn the terminals clockwise to tighten.
  • Ensure the speaker wire insulation is not inserted into the hole to maintain good contact.
  • For longer wire runs (up to 50 feet), use 16 gauge weatherproof wire.
  • Connect the other end of the speaker cables to the corresponding positive and negative outputs on your external amplifier.
Rear view of two passive speakers showing terminal connections
Figure 4: Speaker Terminals (Red: Positive, Black: Negative)

4. Operating Instructions

Once the speakers are correctly wired to an external amplifier and the amplifier is powered on, you can begin playing audio. The method of playing music (e.g., Bluetooth, AUX input) will depend on the features of your external amplifier.

4.1 Audio Playback (via External Amplifier)

  • AUX Connection: If your amplifier supports AUX input, connect your audio source (e.g., phone, media player) to the amplifier using an AUX cable.
  • Bluetooth Connection: If your amplifier has Bluetooth 5.0 capability, enable Bluetooth on your audio device and pair it with your amplifier. Refer to your amplifier's manual for specific Bluetooth pairing instructions.
  • Adjust the volume and other audio settings on your amplifier and audio source for desired sound output.

5. Maintenance

The Herdio HOS-501 speakers are designed to be weather-resistant, capable of withstanding snow, rain, and sun exposure. However, proper care will extend their lifespan and maintain performance.

  • Cleaning: Wipe the speaker cabinets with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Extreme Temperatures: For prolonged periods of extreme cold (below 0°F) or extreme heat (above 120°F), it is recommended to remove the speakers from their outdoor mounts and store them indoors.
  • Water Exposure: While waterproof, avoid submerging the speakers. Ensure connections are sealed if exposed to heavy rain or splashes.
Image illustrating weather resistance features including heat-resistant, waterproof, and frost-resistant icons
Figure 5: Weather Resistance Features

6. Troubleshooting

If you encounter issues with your Herdio HOS-501 speakers, consider the following common troubleshooting steps:

  • No Sound:
    • Check all wiring connections between the speakers and the amplifier. Ensure positive is connected to positive and negative to negative.
    • Verify that the amplifier is powered on and functioning correctly.
    • Confirm that the audio source is playing and its volume is turned up.
    • Check the volume levels on both the amplifier and the audio source.
  • Distorted Sound:
    • Reduce the volume on both the amplifier and the audio source.
    • Ensure speaker wires are not frayed or shorting.
    • Verify that the amplifier's power output matches the speaker's input power requirements.
  • Intermittent Sound:
    • Check for loose connections at both the speaker terminals and the amplifier.
    • Inspect speaker cables for damage.

7. Specifications

Herdio HOS Series Speaker Specifications
Feature HOS-401 HOS-501 (This Model) HOS-601
Power Output (Max) 2x 100W 2x 150W 2x 200W
Woofer 4" Injection Molded PP Cone Butyl Rubber Surround 5.25" Injection Molded PP Cone Butyl Rubber Surround 6.5" Injection Molded PP Cone Butyl Rubber Surround
Tweeter 1" PET Dome 1" PET Dome 1" PET Dome
Color White/Black White/Black White/Black
Impedance 8 Ohm
Sensitivity 89dB
Frequency Range 100Hz-20KHz
Channels 2 (2.0)
Cabinet Material Plastic
Weight (per pair) 4300g (4.3kg)
Package Dimensions (L x W x H) 46cm x 33cm x 24cm
Voltage Range Low voltage non-USB (below 75V DC, below 50V AC)
Certification CE
Diagram showing speaker dimensions and internal components including 1 inch PET Dome Tweeter and 5.25 inch Cone Woofer
Figure 6: Speaker Dimensions and Components

8. User Tips

  • Amplifier Compatibility: Ensure your external amplifier is compatible with 8 Ohm speakers and provides adequate power (e.g., 2x 150W for HOS-501) for optimal performance.
  • Sound Quality: These speakers are noted for good bass and treble. Experiment with amplifier EQ settings to fine-tune the sound to your preference, especially for beat-heavy music.
  • Outdoor Use: While durable, consider bringing speakers indoors during severe weather conditions to maximize their lifespan.

9. Warranty and Support

9.1 Limited Warranty

All Herdio speaker products come with a 1-year Limited Warranty against defects in materials and workmanship. To make a warranty claim, proof of purchase is required.

During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.

9.2 Technical Support

The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays. If you have any questions or require assistance, please send your messages to the following email address:

Email: support@herdiotech.com

For more information, visit: www.Herdiotech.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.