1. Safety Information
For your safety, the safety of others, and to prevent damage to devices and vehicles, it is crucial to read and understand all safety instructions presented in this manual before operating or coming into contact with the device.
Danger
This signal word indicates "an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders."
Warning
This signal word "indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders."
General Safety Instructions:
- Read and Understand: Ensure that all operators and individuals in the vicinity of the device have read and understood the safety instructions.
- Proper Use: Only use the device as described in this manual. Always adhere to the safety messages and test procedures provided by the vehicle or equipment manufacturer.
- Knowledge and Skill: The automotive technician must be knowledgeable about the system being tested. Familiarize yourself with proper service methods and test procedures.
- Acceptable Testing Practices: Perform tests in a manner that ensures your safety, the safety of others, and prevents damage to the device and the vehicle.
Specific Responsibilities:
- Refer to Manufacturer Guidelines: Always consult and follow the safety messages and applicable test procedures from the vehicle or equipment manufacturer before using the device.
- Use Appropriate Tools and Techniques: Due to the variety of test applications and product variations, it's important to use the correct tools and techniques for each specific task.
- Anticipate Safety Requirements: While this manual provides comprehensive guidance, it cannot cover every potential situation. Technicians must be prepared to handle unforeseen circumstances safely.
By adhering to these guidelines and responsibilities, you can ensure a safe and effective working environment while using the device.
Safety Warnings:
- Safe Environment: Always perform automotive testing in a safe environment.
- Eye Protection: Wear safety eye protection that meets ANSI standards.
- Avoid Hazards: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Ventilation: Operate the vehicle in a well-ventilated work area to avoid inhaling poisonous exhaust gases.
- Transmission and Brakes: Put the transmission in PARK (for automatic) or NEUTRAL (for manual) and ensure the parking brake is engaged.
- Wheel Blocks: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Ignition System Caution: Be extra cautious around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components generate hazardous voltages when the engine is running.
- Fire Extinguisher: Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Test Equipment Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Clean Equipment: Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
- No Driving While Testing: Do not drive the vehicle and operate the test equipment simultaneously to avoid distractions that may cause an accident.
- Service Manual Reference: Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- Battery Check: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the test equipment or generating false data.
- Avoid Electromagnetic Interference: Do not place the test device on the vehicle's distributor, as strong electromagnetic interference can damage the device.
2. Introduction
The XTOOL D5S is an essential diagnostic tool addressing common automotive issues for engine, transmission, ABS, EPB, and SRS systems. This advanced diagnostic device efficiently identifies and clears fault codes, accesses data stream information, reads freeze frame data, and reads ECU information.
The D5S features an upgraded dual-core 1.2GHz Processor, 128MB RAM, and 32GB ROM, all operating on a user-friendly Linux system, complemented by a robust 3150mAh 3.6V battery for extended use.
It has 19 special functions, all with lifetime free updates, such as Oil Light Reset, EPB, SAS, DPF, BMS Reset, Throttle, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Matching, Suspension, Window Initialization, Headlight, EGR Relearn, Control Unit Reset, and Gearbox Matching. Additionally, the D5S allows users to view up to four data streams simultaneously in a single interface.
This manual introduces the basic features of the Diagnostic Tool, including the control buttons, data ports, battery pack, and power sources. Technical Specifications are provided at the end of this manual.
Video: XTOOL D5S Product Overview, highlighting its features and capabilities.
3. Getting Started
Ensure that the Diagnostic Tool is adequately powered by either checking its battery status or connecting it to an external power supply.
3.1. Turning On
To turn on the XTOOL D5S Diagnostic Tool, press and hold the power button located on the top right of the device for approximately five seconds. The tool will automatically power on if the internal battery pack has sufficient charge or if it is connected to an AC power supply. If the internal battery pack is completely drained, you need to charge it for more than 6 hours and then turn it on again.
3.2. Turning Off
To turn off the XTOOL D5S Diagnostic Tool, press and hold the power button for more than three seconds. The tool will then automatically power off.
NOTE: Before turning off the XTOOL D5S Diagnostic Tool, make sure to terminate all vehicle communications. If you try to power off the tool while it is still communicating with the vehicle, a warning message will appear. Forcing a shutdown during communication could potentially cause issues with the ECM (Engine Control Module) on certain vehicles. It's crucial never to disconnect the VGA to OBDII-16 main cable while the Diagnostic Tool is actively communicating with the vehicle ECM.
3.3. Emergency Shutdown
During normal operation, turn the Diagnostic Tool off using the Turning Off procedure above. The emergency shutdown procedure should only be used if the Diagnostic Tool does not respond to navigation or control buttons or operates erratically. To force an emergency shutdown, press and hold the Power button for at least five seconds.
NOTE: Using the emergency shutdown procedure while communicating with the vehicle ECM may cause issues with the ECM on some vehicles.
4. Product Overview
4.1. Main Ports of The Tablet

- 5.45-inch Touch Screen
- Power Button
- VGA 15 PIN-Port
- Type-C Port
- Memory Card Slot
4.2. Screen Layout & Icons
When you turn on the Diagnostic Tool, you will see the diagnostic screen appear with various icons for different functions.

- Auto Scan: Automatically detects and decodes the VIN (Vehicle Identification Number), then comprehensively scans all available vehicle electronic control modules for diagnostics.
- Diagnosis: Brings up the diagnostic menu, allowing navigation via Auto VIN or manual input of vehicle information for diagnostics.
- OBD-II: Includes functions for reading/clearing vehicle fault codes, monitoring real-time data, and detecting emission system issues.
- Special Function: Covers commonly performed maintenance services for day-to-day auto maintenance tasks.
- Updates: Allows downloading diagnostic software programs individually or in batches.
- More: Provides access to user account setup, workshop profile, firmware information, diagnostic reports, language settings, measurement units, and other settings.
5. Power Sources
The XTOOL D5S Diagnostic Tool can receive power from three methods:
- Internal Battery Pack
- AC Power Supply
- 12-Volt vehicle power
5.1. Internal Battery Pack
The D5S Diagnostic Tool is powered by an internal rechargeable battery pack. A fully charged battery provides sufficient power for about 3.5 hours of continuous operation. Battery charging occurs when the Diagnostic Tool is connected to the AC Power Supply and a live AC power source.
5.2. AC Power Supply
You can power the Diagnostic Tool by connecting it to a standard AC outlet using the AC power supply. The connector at the end of the output cable from the AC power supply should be plugged into the DC power supply input jack located on the top of the Diagnostic Tool. It's important to use only the AC power supply that was provided specifically for this purpose to ensure proper and safe operation of the tool.
5.3. 12-Volt Vehicle Power
Locate the vehicle's OBDII port, typically found beneath the driver's seat, near the steering wheel. Insert the 16-pin connector of the OBDII cable into the vehicle's OBDII port, and connect the 15-pin end of the OBDII cable to the device, tightening the nut to ensure a secure connection.
6. Vehicle Connection
The scan tool must be connected to the vehicle's OBD-II port to allow the tablet to establish communication with the vehicle.

Steps for Connection:
- Turn on the tablet.
- Connect the vehicle and tablet using the main test cable (VGA to OBDII-16 Main Cable).
- Turn on the vehicle's ignition switch to start the diagnostic process.
NOTE: If the OBD port of your vehicle is located on the chassis or in a hard-to-reach area, you can contact us to purchase an OBD extension cable for easier operation.
7. Diagnosis Operations
To ensure proper communication and diagnostics, the vehicle must be correctly identified. The vehicle identification process is menu-driven, and you should follow the screen prompts to enter the required information. Exact procedures may vary depending on the region and the vehicle manufacturer.
7.1. Vehicle Identification
Options for vehicle identification include VIN (Vehicle Identification Number), Region, Manufacturer and Model, and other specific criteria as required by the Diagnostic Tool.
7.1.1. Auto Scan (Auto Identification)
Click the "Auto Scan" icon on the diagnostic screen. The Diagnostic Tool will automatically scan and decode the vehicle's VIN for identification. This process ensures thorough assessment and identification of potential issues across the vehicle's systems.

NOTE: Auto Identification functionality may not be compatible with all vehicles. If Auto Identification fails, it is advisable to try alternative options like Manual Selection.
7.1.2. Manual Input
When the automatic scan cannot identify the vehicle, it is recommended to manually input the VIN to recognize the vehicle.

There are four reasons why it cannot be scanned automatically:
- The vehicle is too old to come with AUTO SCAN function on itself.
- The VIN is not written in the ECU of the vehicle, you will need to write the VIN in the ECU first.
- The VIN is too rare or too new and it is not recorded in the VIN database.
- Vehicles of the same model might have different configurations, and the information provided in VIN is not enough to select the correct vehicle, so you will need to manually select the configurations.
7.1.3. Manual Selection
When "Auto Scan" and "Manual Input" fail to identify the vehicle, you can always select "Manual Selection" to identify the vehicle and proceed to diagnostics. Manual Selection is the most reliable vehicle identification option.
7.2. 5 Main System Diagnostics
The XTOOL D5S offers diagnostics for 5 systems: Engine, Transmission, Airbag, Anti-lock Braking (ABS), and Electronic Parking Brake (EPB).

- ECM System Diagnosis: Identify engine issues, turn off warning lights, retrieve codes, and access OBD II data.
- ABS System Diagnosis: Read and clear ABS error codes, monitor critical ABS systems through live data streams.
- SRS System Diagnosis: Detect electronic parameters, check health status of components.
- TCM System Diagnosis: Locate transmission errors, read fault codes, shut down warning lights post-repair.
- EPB System Diagnosis: Read and clear electronic parking brake error codes, monitor real-time performance data, perform calibration and maintenance.
NOTE: If you notice that not all five systems are displayed, it may be because some vehicles integrate two or more systems together.
7.3. Full OBD2 Functions
The XTOOL D5S car scanner supports full OBD2 test modes for enhanced detection of car engine systems.

- Read Error Codes
- Clear Error Codes
- View Live Data
- Read Freeze Frame
- Read ECU Information
- Component Test
- On-Board Monitor Test
- O2 Sensor Monitoring Test
- I/M Readiness
- Read Vehicle Information
7.3.1. OBD-II Protocols Supported:
- SAEJ1850 PWM
- SAE J1850 VPW
- ISO14230-4
- ISO 9141-2
- ISO15765-4
7.3.2. Live Data Graphing (4-in-1)
The D5S features graphic live data stream capabilities, allowing users to view up to 4 PID (Parameter ID) live data streams simultaneously in one graph. This offers real-time monitoring, easier data comparison, and visual representation of trends.

7.3.3. Read Freeze Frame
When a fault code is triggered, the vehicle's ECU saves related data from that moment to generate a freeze frame. This is used to analyze the root cause of the fault, along with fault codes and PID data. The freeze frame data displayed varies across vehicles, and some vehicles may not support freeze frame functionality.
7.3.4. Clear Trouble Codes
This option is designed to erase all emission-related diagnostic data stored in the memory of the selected ECM. This includes Diagnostic Trouble Codes (DTCs), freeze frame data, and test results. When you select the clear codes function, a confirmation screen appears to prevent accidental data loss. You must choose "Yes" on the confirmation screen to proceed with the operation.
7.4. FCA AutoAuth & CAN FD Protocol

- CAN FD Protocol: An enhanced version of the original CAN protocol, supporting GM vehicles from 2020 and later, allowing for higher data transfer speeds and larger data payloads.
- FCA AutoAuth: A secure communication system for Chrysler, Dodge, Fiat, and Jeep models from 2017 and later, enabling advanced diagnostic functions.
8. Special Functions (16+ Maintenance Services)
This section covers the most commonly performed maintenance services used by both DIY car repair enthusiasts and professionals for day-to-day auto maintenance tasks.

The XTOOL D5S automotive diagnostic tool offers 16 reset services, all of which can be updated in real-time at no cost. These services include:
- Oil Light Reset: Resets the engine oil life system after an oil change.
- EPB (Electronic Parking Brake) Service: Resets the brake pad to clear trouble codes after replacement.
- SAS (Steering Angle Sensor) Calibration: Permanently stores the current steering wheel position as the straight-ahead position.
- DPF (Diesel Particulate Filter) Regeneration: Manages DPF regeneration, component replacement teach-in, and DPF teach-in after replacing the ECM.
- BMS (Battery Management System) Reset: Evaluates battery charge state, monitors close-circuit current, registers battery replacement, and activates the rest state of the vehicle.
- Throttle Position Reset (Throttle Adaptation): Resets throttle actuators and learned values to default.
- TPMS (Tire Pressure Monitoring System) Reset: Performs learning, matching, and resetting functions of the tire pressure sensor.
- ABS Bleeding: Bleeds the brake system to restore ABS brake sensitivity when ABS contains air.
- Injector Coding: Writes the identification code of the fuel injector into the ECU so that the ECU can recognize the new injector.
- Gearbox Matching (Gearbox Adaptation): Completes self-learning of the gearbox to improve shift quality.
- Suspension Calibration (Suspension Adaptation): Adjusts the vehicle body height sensor for level calibration.
- Windows Initialization: Recovers ECU initial memory and automatic ascending/descending function of power windows after battery disconnection.
- Headlight Alignment (Headlight Adjustment): Initializes the adaptive headlight system.
- EGR (Exhaust Gas Recirculation) Relearn (EGR Adaptation): Learns the EGR valve after cleaning or replacement.
- Crank Sensor Relearn (CPS Reset): Enables tooth learning for the vehicle to turn off the MIL.
- Control Unit Reset: Resets the ECU software when a fault occurs due to abnormal working temperature or voltage change.
NOTE: Special functions may vary by vehicle model and year. Please provide your car's specifics to check compatibility. If you have any questions or need more information, feel free to ask!
9. Software Updates
Software updates can be performed while connected to a Wi-Fi network or using a mobile phone's hotspot. Using a mobile phone's hotspot is recommended in case of network provider restrictions or when home Wi-Fi is unavailable.

9.1. Update All Software Programs
Update all by clicking "Update" at the left of the update menu.
9.2. Update Individual Software Program
Update specific software programs by clicking the update icon at the right side of the corresponding software program. If the update is interrupted, click the icon again to proceed.
9.3. Delete Software Program
When the diagnostic tablet has taken up too much memory and become slow, the solution is to delete the software programs you rarely use to free up some space. To delete, enter the Diagnostic menu, click on any diagnostic software package for five seconds. When a blank box appears in the upper left corner, check the software package you want to delete and click "Delete" to remove it.
10. Settings
This section covers the settings for the diagnostic software or tablet, including the tablet's language, units used in the diagnostic program, Wi-Fi connection, display, storage, date & time, and device information.

10.1. Language
The D5S supports 22 languages including Arabic, French, Danish, German, Greek, English, Spanish, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese, Russian, Swedish, Thai, Turkish, Vietnamese, and Traditional Chinese. The default language is English. To change the language, contact support with your device's Serial Number (S/N).
10.2. Unit
This setting provides 3 sets of units (Metric, Imperial, US) to measure various sensor values.
10.3. Wi-Fi Connection
Connect to 2.4 GHz or 5.0 GHz Wi-Fi or a mobile hotspot. For certain brands (e.g., Peugeot) requiring online server access for diagnostics, Wi-Fi connection is essential.
10.4. Display
Adjust screen brightness and sleep time.
10.5. Storage
Check storage space status and clear cache.
10.6. Date & Time
Select time zone and choose 12-hour or 24-hour format.
10.7. About
View device name, serial number, firmware version, device version, and restore to factory settings.
11. Troubleshooting (FAQs)
- Q: I haven't found I/M readiness in the menu.
A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > I/M Readiness. - Q: Unable to find live sensor data as the generic OBD2 scanner, like short-term/long-term fuel trim.
A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > Live Data > LTFT, STFT or similar term. - Q: Unable to find the misfire data for my Ford/Dodge/Chrysler/Jeep cars?
A: OBD-II > Auto Scan or Select OBD-II Protocol for your car > On Board Monitor Test > Select "Misfire Cylinder Data" or similar term. - Q: I cannot charge the battery now. I plugged in the cord, it's not charging. The battery is almost dead, only about 10% left.
A: Try to use the original charging cable or OBD test cable to charge the device for more than six hours. If neither method works, contact technical support with a video showing the charging issue. - Q: Can scanner tune up car?
A: Sorry, D5S Diagnostic Tool does not have the capability to tune up car. - Q: It was frozen until the battery went flat even I tried the reset button and the power button.
A: Make sure you have updated the App to the latest version. If yes, reset to factory settings and check again. If it still does not work, reach out to support. - Q: I cannot update, I've tried Wi-Fi and cell phone as hotspot, however, keep telling me failure connection.
A: This problem could reside with the setting of your router firewall or the network provider in your region that restricts access to the server. Check if your router firewall can access the server. Mobile hotspot is often a good alternative. - Q: Why should I connect the scanner to internet once a month?
A: It's a government policy compliant requirement to connect the device to Wi-Fi once a month to report IP location to prevent the device being used for illegal activities. - Q: The auto scan/VIN cannot work on my vehicle.
A: As for auto scan/VIN, it does not cover all vehicles as some vehicles did not store VIN in the ECU, some VIN is not included in our coverage database, and some vehicles like Dodge work in "sending command, answering command" mode for vehicle communication. Try alternative navigation methods: turn on ignition (and start engine for older vehicles) for auto scan, manual VIN input, or manual system selection. - Q: My diagnostic tool cannot connect to Wi-Fi.
A: If it shows "times out", check your router settings (WPA2, not WPA3, no blocked outgoing traffic). Switching to mobile phone hotspot will most likely solve the registration issue. If it shows "connect internet to sync your device", correct the time zone in the Android system to match the network time zone. - Q: Received a used device with a lock screen password, unable to open the device.
A: Contact our support team with the device's S/N to resolve the issue. - Q: Shall I connect my device to the Internet/ Wi-Fi all the time?
A: No, it doesn't need an Internet connection all the time. You just need to register it and download the updates with internet connection. For some special vehicles like Peugeot, scan tools need to be connected to the Internet, because it is required by the manufacturer. It will require internet connection when you are doing some advanced features like ECU Programming. - Q: Does your tools can support all the functions on all vehicles?
A: All our tools are comprehensive diagnostic tools that can work on many vehicle brands, but it cannot do all the functions on all vehicles, just like any other scan tools in the market, even the factory scanner can only do functions on their own brand. Because not all vehicles come with the same functions when manufactured and even the vehicles of the same model might have various configurations.
12. Technical Specifications
| Item | Description/Specification |
|---|---|
| Operating System | Linux |
| Protocols Supported | CAN FD/FCA |
| Processor | Dual-core 1.2GHz |
| Memory | 128M+32G |
| Connectivity | Type-C |
| Operating Method | Flat Panel Touchscreen |
| Upgrade Method | Device Connects to Wi-Fi for Online Upgrade |
| Battery | 3150mAh 3.6V |
| Wi-Fi | 2.4G/5Ghz |
| Tested Battery Life | 3.5 Hours |
| Dimensions | 19.5*2.8*11.5(CM) |
| Free Renewal Update | Lifetime |
| Charging Method | Type-C Charging (No charger included) |
| Sensor | Gravity/ Light Sensor |
| Audio | Microphone |
| Speaker | Built-In Speaker |
| Weight (Including Battery) | 0.4KG |
| Gross Weight | 0.8KG |
| Operating Temp Range (Ambient) | -4°F ~ 140°F (-20°C ~ 60°C) |
| Storage Temp (Ambient) | -40~158°F (-40~70°C) |
| Operating Humidity | <90% |
13. User Tips
- Language Change: To switch the device language from English to another supported language, contact XTOOL support with your device's Serial Number (SN).
- Charging Issues: If the device is not charging, ensure you are using the original charging cable or OBD test cable and charge for at least six hours. If the problem persists, contact technical support with a video of the issue.
- Auto Scan/VIN Not Working: If automatic VIN detection fails, try manually entering the VIN or selecting the vehicle system manually. Ensure the vehicle's ignition is on, and for older vehicles, the engine may need to be running.
- Update Connection Problems: If you experience connection failures during updates, check your router's firewall settings or any network provider restrictions. Using a mobile hotspot can often resolve these issues.
14. Warranty & Support
14.1. Limited Two-Year Warranty
Shenzhen XTOOL Tech Intelligent Co., LTD. (the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof be proven defective in material or workmanship during normal usage and under normal conditions within two years from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).
The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device.
14.2. Warranty Exclusions
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair or, improper storage;
- Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced;
- Damage from exposure to excessive temperature or extreme environmental conditions;
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;
- Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts;
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.
14.3. Contact Us
For technical assistance, warranty claims, or any other inquiries, please contact XTOOL support:
- E-mail: support@xtoolonline.com
- Website: https://www.xtoolonline.com/
You can also find additional resources and information, including a User Manual (PDF) and FAQ database, on our website.