LAUNCH X431 PROS Elite

Contents

LAUNCH X431 PROS Elite Car Diagnostic Tool User Manual

Model: X431 PROS Elite

Brand: LAUNCH

1. Introduction

1.1 Product Profile

The LAUNCH X431 PROS Elite is an advanced diagnostic tool designed for comprehensive vehicle diagnostics. It leverages LAUNCH's cutting-edge diagnostic technology to cover a wide range of vehicles, offering powerful functions and precise test results.

This tool facilitates full car model and full system vehicle trouble diagnosis through simple wired communication with the vehicle. Its capabilities include Reading DTCs (Diagnostic Trouble Codes), Clearing DTCs, Reading Data Stream, Actuation Tests, and Special Functions.

Key features of the X431 PROS Elite include Intelligent Diagnose, Local Diagnose, Remote Diagnose, Service Functions, One-click Update, ADAS calibration, TPMS, Diagnostic History, Feedback, Vehicle Coverage, and support for various add-on modules.

1.2 Components & Controls

The device features a robust design with an 8-inch capacitive touch screen. Below is an overview of its main components:

Launch X431 PROS Elite diagnostic tool showing software update screen

Image: The Launch X431 PROS Elite diagnostic tool displaying a software update screen, highlighting its user interface.

  1. Type-C USB port: Connects to an AC outlet for charging or to a PC for data exchange.
  2. Type-A USB port: Connects to compatible add-on modules or USB storage devices.
  3. DB-15 Diagnostic connector: Connects the diagnostic cable to the vehicle's OBD II diagnostic socket.
  4. POWER key: Used to turn the tool on/off, activate/deactivate the LCD. Press for 3 seconds to turn on/off. Press for 8 seconds for forced shutdown.
  5. Charging LED: Red indicates charging, Green indicates fully charged.
  6. LCD screen: Displays test results and user interface.
  7. Camera flash: Provides illumination for the rear camera.
  8. Adjustable stand: Flips out to adjust the viewing angle or to hang the device.
  9. Rear camera: 8.0MP camera for taking pictures.
  10. Speakers: For audio output.

2. Setup

2.1 Charging & Turning On

  1. Use the included power adapter to charge the tool.
  2. After charging is complete, press the POWER button for 3 seconds to turn the tool on. The system will initialize and enter the home screen.

Note: If the battery is unused for a long time or completely discharged, the tool may not power on immediately when charged. Charge it for at least 5 minutes before attempting to turn it on.

Warning: Always use the included power adapter to charge your tool. Using unauthorized adapters may cause damage.

2.2 Screen Layout

The bottom of the screen features five on-screen buttons:

  • Home: Navigates to the Android home screen.
  • Recent App: Displays running applications.
  • Connection: Shows the tool's connection status.
  • Screenshot: Captures the current screen.
  • Back: Returns to the previous screen.

2.3 Change System Language

The tool supports multiple system languages:

  1. On the home screen, tap Settings > System > Language & input > Languages.
  2. Tap Add a language and select your desired language.
  3. Tap and hold the desired language and drag it to the top of the list to set it as the primary language.

2.4 Adjust Brightness

Note: Reducing screen brightness helps conserve battery power.

  1. On the home screen, tap Settings > Display > Brightness level.
  2. Drag the slider to adjust the brightness.

2.5 Set Standby Time

To conserve power, the screen can be set to lock automatically after a period of inactivity:

  1. On the home screen, tap Settings > Display > Advanced > Sleep.
  2. Choose the desired sleep time.

2.6 Network Setup

The tool has built-in Wi-Fi for online functions such as registration and software updates:

  1. On the home screen, tap Settings > Network & Internet > Wi-Fi.
  2. Slide the Wi-Fi switch to ON. The tool will search for available wireless networks.
  3. Select a network. If it's open, it will connect automatically. If encrypted, enter the password.
  4. Once "Connected" appears, the Wi-Fi connection is complete.

Note: Disable Wi-Fi when not needed to conserve battery power.

2.7 Register & Update

New users must complete a registration process:

  1. Launch the application from the home screen and tap Login.
  2. Tap New Registration to enter the sign-up page.
  3. Fill in the required information (Username, Password, Confirm Password, Email, Country).
  4. Tap Register.
  5. Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope) and tap Activate.
  6. Tap OK to proceed to the update center for software updates.

Note: The tool has an auto-save function for login credentials.

2.8 Connections

To connect the diagnostic tool to a vehicle:

  1. Turn off the vehicle ignition.
  2. Ensure the vehicle battery voltage is between 11-14 volts.
  3. Locate the DLC (Data Link Connector). It is usually within 12 inches of the center of the instrument panel, under or around the driver's side. Refer to the diagram below for common locations. If not found, consult the vehicle's service manual.
Diagram showing common DLC locations in a car interior

Image: Common locations for the Data Link Connector (DLC) in various vehicle models.

Diagram showing how to connect the diagnostic cable to the vehicle's DLC port

Image: Illustration of connecting the diagnostic cable to a vehicle's DLC port.

  1. Connect one end of the included diagnostic cable to the DB-15 diagnostic connector on the tool, and the other end to the vehicle's DLC port.

3. Operating the Diagnostic Tool

3.1 Job Menu Overview

The main menu provides access to various diagnostic and utility functions:

NameDescription
Intelligent DiagnosePerforms quick tests by reading VIN from the cloud server, avoiding manual menu selection. Checks historical repair records online.
Local DiagnoseManually diagnoses a vehicle.
Service FunctionOffers coding, reset, relearn, and other service functions.
Remote DiagnoseEnables remote diagnosis and instant messaging for repair shops/technicians.
TPMSConfigures the tool as a professional TPMS service tool (requires TSGUN device, sold separately).
Software UpdateUpdates vehicle diagnostic software and APK.
Diagnostic HistoryAccesses diagnostic reports from previously tested vehicles. Resumes previous operations.
FeedbackProvides diagnostic logs for issue analysis.
ADASPerforms ADAS calibration operations (requires specific ADAS calibration tool, sold separately).
MallSubscribes to extra software or service functions.
Vehicle CoverageViews all supported vehicle models.
Info CenterIncludes tool information, product catalog, training videos, and repair data.
User InfoManages reports, changes password, configures Wi-Fi printer, system settings, and logout.
Other ModulesIncludes add-on modules, product manual, FAQ, and Android system apps.

3.2 Intelligent Diagnose

This function automatically decodes the vehicle's VIN and retrieves information from the remote server to guide you to the vehicle information page, streamlining the diagnostic process.

Notes: Ensure the tool is properly connected to the vehicle's DLC and a stable network connection is available.

  1. Tap Intelligent Diagnose on the Job menu.
  2. The tool will read the vehicle VIN.
  3. If VIN is found, the vehicle information page appears. Tap Diagnostic to start a new session or Scan History to view past records.
  4. If VIN is not found, you can manually enter or scan the VIN barcode.

3.3 Local Diagnose

This mode requires manual menu selection:

  1. Tap Local Diagnose to enter the vehicle selection page.
  2. Select the diagnostic software version (e.g., DEMO V15.52).
  3. Select the desired vehicle model (e.g., TOYOTA).
  4. Select a test item: Health Report (Quick Test), System Scan, or System Selection.

3.3.1 Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed vehicle health report.

  1. On the test item selection screen, tap Health Report.
  2. Turn on the ignition switch. The system will scan ECUs.
  3. Fault codes appear in red, properly functioning systems in black.

Warning: Never replace parts based solely on DTC definitions. Always follow vehicle service manual procedures.

To save the report, tap Report. To retrieve specific DTCs, tap Enter or use the search function.

3.3.2 System Scan

This option quickly scans which systems are installed on the vehicle.

3.3.3 System Selection

Allows manual selection of test systems and functions:

  1. Tap System Selection.
  2. Swipe to view vehicle systems. Tap a target system (e.g., Engine) to navigate to diagnostic functions.

Note: Diagnostic menus vary by vehicle.

Read Fault Code

Displays detailed information of DTCs from the vehicle's control system.

Caution: DTCs are only part of troubleshooting. Always refer to the vehicle's service manual.

On-screen buttons include Freeze Frame (snapshot of critical parameters when DTC occurs), Help, Code Search (online DTC information), and Report (save data).

Clear Fault Code

Erases DTCs after repairs. Ensure ignition is ON and engine is OFF. Clearing DTCs does not fix underlying problems; proper repairs are essential.

Read Data Stream

Views and captures real-time Live Data (Parameter Identification Data - PID) for overall vehicle performance and repair guidance.

Caution: If driving during troubleshooting, always have a second person to operate the tool to avoid accidents.

On-screen buttons include Select Page, Select All, Unselect. Data can be viewed in Value (text list), Graph (waveform graphs), or Combine (merged graphs for comparison) modes. You can also Save Sample data for comparison.

Read Freeze Frame

Takes a snapshot of operating conditions when a vehicle fault occurs.

Actuation Test

Accesses vehicle-specific subsystem and component tests. The tool outputs commands to the ECU to drive actuators and determines system integrity by reading ECU data or monitoring actuator operation.

Special Functions

Offers coding, reset, relearn, and other service functions to restore vehicle functionality after repair or replacement. Available tests vary by vehicle manufacturer, year, and model.

3.4 Remote Diagnose

This module assists repair shops and mechanics in diagnosing remote vehicles and facilitates instant messaging for faster repairs.

Launch X431 PROS Elite showing guided functions and VIN identification

Image: The Launch X431 PROS Elite displaying guided functions for VAG vehicles and intelligent VIN identification.

3.4.1 Add Friends

  1. Tap Contacts.
  2. Input the partner's username in the search bar and tap Search.
  3. Once the result appears, tap the desired name and then Add friend to send a request.

3.4.2 Start Instant Messaging

After adding friends, tap their photo to enter the chat screen. You can send text, voice messages, or emojis.

3.4.3 Launch Remote Diagnosis (Scanner-To-Scanner)

Allows initiating remote diagnosis with other compatible diagnostic tools.

  1. Tap Remote Diagnostic.
  2. Select REQUEST CONTROL REMOTE DEVICE to control a partner's device or INVITE REMOTE DIAGNOSE ASSISTANT to invite a technician.

3.4.4 Launch Remote Diagnosis (Scanner-To-PC)

Allows remote control from a PC client technician.

  1. Tap Remote and slide the switch to ON.
  2. Notify the PC client technician to access http://remote.x431.com.
  3. The technician will input their account and password, then your device's Serial Number to start remote diagnosis.

Note: During remote diagnosis, avoid executing actions on the tool. Diagnostic reports will be automatically generated.

4. Maintenance

4.1 Service (Reset) Functions

The tool offers over 32 service functions for coding, resetting, and relearning, helping vehicles return to functional status after repairs or replacements. The available functions are subject to change with continuous improvements and updates.

Overview of 37+ Maintenance Functions including Brake Reset, Oil Maintenance Reset, Steering Angle Reset, Battery Matching, ABS Bleeding, Throttle Relearn, TPMS Reset, DPF Regeneration, Gearbox Relearn, Immobilizer

Image: A visual representation of 37+ maintenance functions supported by the Launch X431 PROS Elite.

List of 32+ Hot Reset Functions including Oil Reset, Brake Reset, Immobilizer Reset, Steering Angle Reset, TPMS Reset Database, Battery Reset, Adblue Reset, Air/Fuel Reset, NOX Sensor Reset, Sunroof Reset, ABS Bleeding, Electrical Throttle Relearn, Gearbox Relearn, Injector Coding, Language Change, EGR Adaption, Seat Calibration, Tire Reset, Windows Calibration, etc.

Image: A comprehensive list of 32+ hot reset functions available on the diagnostic tool.

  • Maintenance Light Reset (Oil Reset): Resets the oil service light for the engine oil life system after oil changes or related component replacements.
  • Electronic Parking Brake Reset (BRAKE RESET): Resets the brake pad after replacement, when the indicator lamp is on, or after circuit/servo motor repairs.
  • Steering Angle Reset (SAS Reset): Resets the steering angle after replacing the steering angle position sensor, mechanical parts, or performing four-wheel alignment.
  • ABS Bleeding: Performs bi-directional tests for the Anti-lock Braking System (ABS) when air is present, or after replacing ABS components.
  • Crank Position Sensor Adaptive Learning (GEAR LEARN): Performs gear learning to turn off the Malfunction Indicator Light (MIL) after replacing engine ECU, crankshaft position sensor, or flywheel, or when "tooth not learned" DTC is present.
  • Anti-theft Matching (IMMO): Matches anti-theft keys after replacing ignition key, ignition switch, instrument cluster, ECU, BCM, or remote control battery.
  • Injector Coding (INJECTOR): Writes or rewrites injector codes in the ECU after replacing the ECU or injector.
  • Battery Matching (BAT. RESET): Resets the monitoring unit of the vehicle battery, clearing low battery fault information and performing battery matching after main battery or battery monitoring sensor replacement.
  • DPF Regeneration (DPF REG.): Clears Particulate Matter (PM) from the DPF filter through continuous combustion oxidation mode to stabilize filter performance. Required after replacing exhaust back pressure sensor, PM trap, fuel additive nozzle, catalytic oxidizer, or DPF regeneration control module.
  • Throttle Matching (ELEC. THROTTLE RLRN): Makes initial settings to throttle actuators and returns learned values to default state to adjust air intake.
  • Gearbox Matching (GEARBOX): Completes gearbox self-learning to improve gear shifting quality after gearbox disassembly or repair.
  • Headlight Matching (AFS RESET): Initializes the adaptive headlamp system.
  • Sunroof Initialization (SUNROOF): Sets sunroof lock-off, rain-closing, sliding/tilting memory, and temperature threshold functions.
  • Suspension Level Calibration (SUS RESET): Adjusts body height after replacing body height sensor or control module in air suspension, or when vehicle height is incorrect.
  • EGR Adaption: Learns the EGR valve after cleaning or replacement.
  • Seats Calibration: Matches seats with memory function after replacement or repair.
  • Tyre Reset: Sets size parameters of modified or replaced tires.
  • Coolant Bleed: Activates the electronic water pump before venting the cooling system.
  • AdBlue Reset: Required after replacing or filling diesel exhaust treatment fluid (car urea).
  • NOx Sensor Reset: Resets the catalytic converter learned value after NOx fault re-initialization or NOx catalytic converter replacement.
  • AC System Relearn/Initialization: Must be performed when vehicle AC ECU or actuator is replaced or ECU memory is lost.
  • High Voltage Battery Detection (HIGH VOLTAGE BATTERY): Used for high voltage battery diagnosis and status information detection.
  • Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending function of power window.
  • Language Change: Changes the system language of the vehicle center console.
  • A/F Reset: Applied to set or learn air/fuel rate parameters.
  • Transport Mode: Used to lower vehicle power consumption. Deactivating transport mode is needed to recover normal vehicle operation.
  • Stop/Start Reset: Opens or closes the automatic Start/Stop function via ECU settings.
  • Intelligent Cruise Control System Reset: Matches the intelligent cruise control module after replacement or repair.
  • Engine Power Balance Monitoring: Monitors crankshaft acceleration to determine relative power provided by each cylinder.
  • Gas Particulate Filter (GPF) Regeneration: Performs GPF replacement or regeneration when fuel consumption increases and engine output power reduces.
  • Motor Angle Calibration: Performs motor angle calibration when the rotor position detected by the motor angle position sensor differs from the actual rotor field position.

4.2 Software Update

This module allows you to update the diagnostic software, application (App), and frequently used software.

  1. Go to Software Update on the Job Menu and tap the Downloaded tab.
  2. The Available tab lists software that can be updated, categorized as:
    • Common software: Essential apps, firmware, and ECU aid.
    • Frequently used vehicle software: Diagnostic and Reset software used often.
    • Other vehicle software: Rarely used software.
  3. Tap Update to start downloading. Once finished, software packages will install automatically.

4.2.1 Renew Subscription

If your software subscription is due or expires, the system will prompt you to renew. Tap Renewals to open the Mall and follow the on-screen prompts.

5. Troubleshooting (FAQ)

5.1 How to save power?

  • Turn off the screen when the tool is idle.
  • Set a shorter standby time.
  • Decrease the brightness of the screen.
  • Turn off WLAN connection if not required.
  • Disable GPS function if GPS service is not in use.

5.2 Communication error with vehicle ECU?

Please confirm:

  1. The tool is correctly connected to the vehicle.
  2. The ignition switch is ON.
  3. If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN number for analysis.

5.3 Failed to enter into vehicle ECU system?

Please confirm:

  1. The vehicle is equipped with this system.
  2. The tool is correctly connected.
  3. The ignition switch is ON.
  4. If all checks are normal, use the Feedback feature to send vehicle year, make, model, and VIN number for analysis.

5.4 How to download the diagnostic App after resetting the tool?

Note: Ensure network connection before registration.

  1. Launch the browser and navigate to the official Launch website (www.x431.com).
  2. Tap Login, input your username and password, then tap Log In.
  3. Confirm the serial number is correct, tap APP application program, and then the Download icon.
  4. Follow on-screen instructions to install.
  5. Login with your existing username and password to download diagnostic software from the update center.

5.5 What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it still displays in English, the software for your language might be under development.

5.6 How to retrieve the login password?

  1. Launch the application from the home screen.
  2. Tap Login on the upper right corner.
  3. Tap Retrieve password.

6. Specifications

Hardware specifications of Launch X431 PROS Elite: 6000mAh Battery, 2.4 & 5 GHz WiFi, Android 10.0, 4-Core CPU, 4GB/64GB RAM/ROM, 8 inch Touchscreen, 8MP Rear Camera

Image: Detailed hardware specifications of the Launch X431 PROS Elite.

FeatureSpecification
Operating SystemAndroid 10.0
Processor2.0GHz Quad-core CPU
Memory (RAM)4GB
Storage (ROM)64GB (Extendable up to 128GB)
Screen8-inch capacitive touch screen
Display Resolution1280x800 pixels
CameraRear-facing 8.0MP
ConnectivityType-A USB port x 1, Type-C USB port x 1, 2.4 & 5 GHz Wi-Fi
Battery6000mAh
Working Temperature0℃ to 50℃
Storage Temperature-20℃ to 70℃
Product Dimensions10.1"L x 1.6"W x 6.7"H (256*171*40.5 mm)
Item Weight8.8 pounds (1000g)
External Testing CertificationCE
Free Update2 Years Free Update
Warranty5 Year
GiftVSP-600 or BST 360

6.1 Package List

The following items are typically included in the package. Accessories may vary by destination; please consult your seller for exact details.

Launch X431 PROS Elite packaging contents including main tablet, diagnostic cable, power adapters, USB cable, quick start guide, user manual, and plastic suitcase

Image: Contents of the Launch X431 PROS Elite package.

  • Main tablet (Diagnostic tool) x 1
  • Diagnostic cable x 1 (Connects to vehicle's OBD II diagnostic socket)
  • EU/US/UK Plug (Power adaptor) x 1 + Switching adaptor x 2
  • Type-C USB cable x 1 (Connects diagnostic tool to AC outlet / PC for charging / data exchange)
  • Quick Start Guide x 1
  • User Manual x 1
  • Plastic Suitcase x 1
  • Password envelope x 1 (Contains product Serial Number and Activation Code for registration)

Note: This model does not contain an OBD1 adapter kit; it only includes the OBD2 connector cable.

7. User Tips

  • VAG Key Flashing: Users have reported success with key flashing for VAG group vehicles. Ensure you follow the guided functions carefully for these procedures.
  • Software Updates: The scanner supports updates from various sources. Regularly check for updates to ensure you have the latest features and vehicle coverage.
  • Lynk & Co Compatibility: For specific vehicle compatibility questions, such as Lynk & Co 01 (2022 model), it is recommended to contact customer support or refer to the detailed vehicle coverage list within the tool's software.

8. Warranty and Support

8.1 Warranty

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty is expressly limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.

The warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective automotive meter is repair or replacement. LAUNCH is not liable for any consequential or incidental damages.

Final determination of defects will be made by LAUNCH according to stipulated procedures.

8.2 Customer Service

If you have any questions regarding the operation of the unit, please contact the seller or customer service center:

  • Tel: 86-755-25938674
  • E-mail: DOD@cnlaunch.com

LAUNCH reserves the right to make changes to product designs and specifications without notice. The actual product may differ slightly from the descriptions in this manual in physical appearance, color, and configuration. While every effort has been made to ensure accuracy, if you have any questions, please contact your local dealer or after-sale service center. LAUNCH does not bear responsibility for misunderstandings arising from this document.

PDF User Manual: A detailed user manual in PDF format is available for download. You can find it by searching for 'Launch X431 PROS Elite User Manual PDF' online or by contacting customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.