Aqara Wireless Mini Switch

Contents

Aqara Wireless Mini Switch User Manual

Model: Wireless Mini Switch

1. Product Overview

The Aqara Wireless Mini Switch is a versatile Zigbee-enabled smart remote control designed for various home automation scenarios. It features a single key that supports multiple press actions (single tap, double tap, long press) to control smart devices and trigger custom automations. It is compatible with both Mi Home App and Apple HomeKit ecosystems.

Aqara Wireless Mini Switch product image showing four units, Aqara logo, 'Works with Mi Home App', and 'Works with Apple HomeKit'.
Aqara Wireless Mini Switch: Compatible with Mi Home App and Apple HomeKit.

2. Setup and Installation

2.1 Prerequisites

  • An Aqara Hub (e.g., Aqara Hub M2, M1S, G2H) is required for the Wireless Mini Switch to function and connect to your smart home ecosystem. The Aqara Hub is sold separately.
  • A stable Wi-Fi network for the Aqara Hub.
  • The Mi Home App or Apple Home app installed on your smartphone or tablet.
Image titled 'Control Everything, Compatible Everywhere' showing the Aqara Wireless Switch with various smart devices and stating '*Aqara Hub is required and sold separately*'.
An Aqara Hub is required for the Wireless Mini Switch to operate.

2.2 Pairing with Aqara Hub

  1. Ensure your Aqara Hub is powered on and connected to your network.
  2. Open the Aqara Home app (or Mi Home App) and navigate to the 'Add Device' section.
  3. Follow the on-screen instructions to add a new device.
  4. When prompted, press and hold the button on the Aqara Wireless Mini Switch for approximately 5 seconds until the indicator light blinks.
  5. The app will confirm successful pairing. You can then assign the switch to a room and customize its functions.

2.3 Mounting Options

The Aqara Wireless Mini Switch is compact and designed to fit seamlessly into various environments. It comes with 3M adhesive for flexible placement.

  • Tabletop Ready: Simply place the switch on any flat surface.
  • Wall Friendly: Use the included 3M adhesive to mount it on a wall.
  • Underdesk Fit: Mount it discreetly under a desk or cabinet for hidden control.
Image showing 'Smart Scenarios at One Tap' with mounting options: 'Tabletop Ready', 'Wall Friendly', and 'Underdesk Fit', highlighting '3M Adhesive Included'.
Flexible mounting options with included 3M adhesive.

3. Operating Instructions

The Wireless Mini Switch offers versatile control through different press actions:

  • Single Tap: Can be configured to activate a device (e.g., turn on an air purifier).
  • Double Tap: Can be configured to control another device (e.g., power on a TV).
  • Long Press: Can be configured for more significant actions (e.g., start an AC system).
Image illustrating 'Compact Control, Triple Command' with examples: 'Single Tap: Activate Air Purifier', 'Double Tap: Power On TV', 'Long Press: Start AC System'.
Customize single, double, and long press actions.

3.1 Smart Scenarios

Utilize the Aqara Home app or Apple Home app to create custom automations and smart scenarios triggered by the Wireless Mini Switch:

  • Home Mode: A single press upon entering your home could activate your preferred 'Home' scene (e.g., turn on lights, adjust thermostat).
  • Movie Time: A double tap could dim lights, close blinds, and turn on your entertainment system.
  • Away Guard: A long press when leaving could activate your security system and turn off all lights.
Image showing 'Smart Scenarios at One Tap' with examples: 'Home Mode', 'Movie Time', 'Away Guard'.
Trigger custom smart scenarios with a single tap.

3.2 Smart Doorbell Function

When combined with an Aqara Hub, the Wireless Mini Switch can be configured to act as a smart doorbell. You can customize the ringtone through the Aqara App.

Image demonstrating the Wireless Mini Switch used as a 'Smart Doorbell' when combined with an Aqara Hub.
Use the switch as a smart doorbell with your Aqara Hub.

4. Maintenance

4.1 Cleaning

To clean the device, gently wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the surface or internal components.

4.2 Battery Replacement

The Wireless Mini Switch is battery-powered. When the battery level is low, you may receive a notification in the Aqara Home app. To replace the battery:

  1. Carefully open the device casing (refer to the device's specific design for opening instructions, usually by twisting the back cover or prying a small notch).
  2. Remove the old battery.
  3. Insert a new battery of the correct type (typically a CR2032 coin cell, though always verify with the device itself or official specifications if available). Ensure correct polarity.
  4. Close the device casing securely.

5. Troubleshooting

  • Device Not Responding: Check if the Aqara Hub is online and within range. Ensure the switch's battery is not depleted. Try re-pairing the device if the issue persists.
  • Cannot Pair: Ensure the switch is close to the Aqara Hub during the pairing process. Reset the switch by holding the button for 10 seconds until the indicator blinks rapidly, then try pairing again.
  • Range Issues: If the switch is too far from the Aqara Hub, its signal may be weak. Consider relocating the hub or adding Zigbee repeaters (like Aqara smart plugs) to extend the network range.
  • App Control Issues: Ensure your Aqara Home app is updated to the latest version. Check your internet connection.

6. Specifications

FeatureDetail
Brand NameAqara
ModelWireless Mini Switch
ConnectivityZigbee
CompatibilityMi Home App, Apple HomeKit
CertificationCE
OriginMainland China
Power SourceBattery (type not specified, typically coin cell)
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc (compliance statement)

7. User Tips

  • Optimal Placement: Experiment with different mounting locations to find the most convenient and effective spot for your automations.
  • Scenario Planning: Before configuring, think about the most frequent actions you perform and how the switch can simplify them.
  • Battery Monitoring: Regularly check the battery status in the Aqara Home app to avoid unexpected interruptions in service.

8. Warranty and Support

For warranty information, technical support, and the latest product updates, please visit the official Aqara website or contact your local distributor.

8.1 Manufacturer Information

Name: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
Tel: +86-18589043609

8.2 EU Authorized Representative

Name: Sophie Bennett
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Tel: +33-774555006

9. Compliance and Environmental Note

This product has undergone EU conformity assessment and complies with the following directives:

  • Low Voltage Directive 2014/35/EU (LVD)
  • Electromagnetic Compatibility Directive 2014/30/EU (EMC)
  • Restriction of Hazardous Substances Directive 2011/65/EU (RoHS)
  • General Product Safety Regulation (GPSR)

This product meets the requirements of electrical safety, electromagnetic compatibility, and environmental compliance. The EU Declaration of Conformity (DoC) is issued and technical documentation is kept by the EU Authorized Representative for inspection.

9.1 Environmental Note

This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.

For a detailed user manual, you may refer to the official PDF document: User Manual (PDF) (Note: This specific PDF may be for a related product, but general compliance information applies).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.