Astrowind BY969M

Contents

4-in-1 Wireless CarPlay Adapter Android Auto Smart Box User Manual

Model: BY969M | Brand: Astrowind

1. Product Introduction

1.1 Functional Introduction

This product is a car-mounted CarPlay wired-to-wireless adapter (also known as a car Dongle). It supports wireless CarPlay, wireless Android Auto, and mobile phone mirroring projection.

The device adopts the Cortex-A9 Ultra processor core, integrating a Cortex-A9 Ultra single-core (900MHz), RISC-V (600MHz), and a 0.5 Tops NPU. It is equipped with a next-generation high-performance ISP image processor and video encoder, boasting professional encoding quality, low encoding bitrate, and mainstream-level image processing capabilities.

This product is compatible with 98% of car models on the market that come with built-in wired CarPlay. It features simple and convenient operation: just plug the adapter into the USB-A port of the car's infotainment system, then follow the on-screen prompts to complete the setup.

To connect, plug the USB-A male connector of the Product into the USB-A female port (which supports the wired CarPlay interface) of the car's data port. This powers the product and enables data connection with the car's display screen. Next, search for the product's Bluetooth name on your mobile phone to pair the devices (ensure WIFI is enabled at the same time). Once paired successfully, you can use CarPlay, Android Auto, and mobile phone mirroring projection functions.

1.2 Product Features

  1. Easy to Install: Simply plug it into the car's USB port (which supports wired CarPlay) to start working. It's plug-and-play as long as your car has the wired CarPlay function.
  2. Enhanced Functionality: Solves the problem of original car screen's limited functionality. Now you can use wireless CarPlay, wireless Android Auto, music playback, video playback, mobile phone mirroring projection, and more.
  3. Wired CarPlay Channel Support: Supports the car's existing wired CarPlay channel.

1.3 Device Compatibility

  • Compatible Car Models: Vehicles with factory-installed wired CarPlay.
  • Apple Phones: Supports iPhone 6 and later models, compatible with iOS 10 and above.
  • Android Phones: Android 11 and above, requires the Android device to support the Auto protocol.
Product overview showing the 4-in-1 wireless CarPlay adapter and its supported functions: Android Auto, Miracast, Airplay, and CarPlay.

Figure 1: Product Overview and Supported Functions

Detailed features of the wireless adapter including Plug and Play, Interconnection, Bluetooth 5.0, 5G WiFi, Mirror Projection, and Voice Assistant.

Figure 2: Detailed Product Features

Comparison highlighting the product's advantages such as durable casing, full projection support, low-power chip, and ultra-thin design.

Figure 3: Product Advantages

2. Product Technical Specifications

Item Technical Specifications Notes
Product Specification Wired-to-Wireless CarPlay Converter
Input Interface USB-A Male Connector
Input Voltage 4.75-5.25 V
Input Current 1A Max
Power 5W
Processor core Cortex-A9 Ultra
WiFi & Bluetooth Module Frequency Bluetooth 5.4
Supported Bluetooth Versions Bluetooth 2.1+ EDR/3.0/4.X/5.3/5.4
WiFi Standards WEP/WPA/WPA2/WPA3-SAE Personal, MFP
Compatible System Versions iOS 10 & Android 11 and above
Operating Temperature -20°C-40°C
Supported Phones iPhone 6 & above; Android 11 & above models
OTG Data Transmission Supported
Online Firmware Update for Vehicles For iPhones: Enter 192.168.18.9 in browser; For Android phones: Enter 192.168.2.101 in browser. Follow prompts to update. Refer to the CarPlay firmware update guide for details.

3. Setup Instructions

3.1 Connecting to the Car Infotainment System

  1. Start the vehicle and wait until the infotainment system finishes loading, with the screen entering the standby main interface.
  2. Connect the adapter to the USB-A port in the car.
  3. Ensure the adapter is plugged into a USB port that supports wired CarPlay.
  4. Once the Product finishes starting up, the infotainment screen will switch to the Product function interface. Tap the corresponding function icon to use CarPlay, Android Auto, or mobile phone mirroring projection.
Main interface of the adapter on a car screen, showing icons for CarPlay, Android Auto, AirPlay, and Miracast.

Figure 4: Adapter Main Interface

Video 1: Product demonstration including unboxing, connection, CarPlay setup, voice commands, AirPlay, and Miracast.

4. Operation Instructions

4.1 Main Interface Button Functions

The main interface of the device provides access to various functions:

  1. CarPlay: Entry option for CarPlay function.
  2. Android Auto: Entry option for Android Auto function.
  3. AirPlay: Entry option for AirPlay function.
  4. Miracast: Entry option for Miracast function.
  5. Return to Original Car System: Returns to the car's native infotainment system.
  6. Settings: Enters the device settings interface.

4.2 Settings Interface Options

Within the settings interface, you can configure the following:

  1. Language: Switch system language.
  2. Start Delay: Startup delay option.
  3. Bandwidth: Wireless network band option.
  4. Audio Delay: Audio delay option.
  5. Forced Display: Forced display option.
  6. Take Effect After Saving: Saves and applies current settings.
  7. Restore Default: Restores default settings.
  8. Return to Main Interface: Exits settings and returns to the main interface.
Settings interface of the adapter, showing options for language, start delay, bandwidth, audio delay, forced display, save, restore default, and return.

Figure 5: Adapter Settings Interface

4.3 Bluetooth Options

  • Equipment Search: Search for available Bluetooth devices.
  • Pairing Record: View a list of previously connected Bluetooth devices.
  • Return to Main Interface: Exits Bluetooth options.

4.4 System Information & Firmware Update

The device provides information on its system and protocol versions. Firmware updates can be performed as follows:

  • For iPhones: Enter 192.168.18.9 in your browser.
  • For Android phones: Enter 192.168.2.101 in your browser.

Follow the on-screen prompts to update. Refer to the CarPlay firmware update guide for detailed instructions.

Screenshot showing system version, protocol version, and upgrade instructions for Apple and Android devices.

Figure 6: System Information and Upgrade Options

4.5 Using the Wireless CarPlay Function

  1. Tap the "CarPlay" app icon on the main interface of the device.
  2. Enable Siri on your iPhone.
  3. Turn on your iPhone's Wi-Fi. If your phone is already connected to another Wi-Fi network, you can ignore this step.
  4. Go to your iPhone's Bluetooth settings, search for, and connect to "Smart Box-****".
  5. A prompt window will appear asking for a Bluetooth pairing request. Click "Agree".
  6. Confirm whether to agree to use contacts, etc. Click "Agree".
  7. Finally, enable CarPlay in-vehicle by clicking "Enable CarPlay In-Vehicle".

After a successful connection, Bluetooth will disconnect from the product, and your iPhone's Wi-Fi will automatically connect to the product's hotspot. The car's display will switch, and you can then use the CarPlay function normally. Note that switching Wi-Fi or turning off Wi-Fi will disconnect the CarPlay connection.

CarPlay initial screen on the car display.

Figure 7: CarPlay Initial Screen

Screenshots illustrating the CarPlay connection steps: Bluetooth pairing request, contact sync permission, and enabling CarPlay in-vehicle.

Figure 8: CarPlay Connection Steps

4.6 Using the Wireless Android Auto Function

  1. Tap the "Android Auto" app icon on the device's main interface.
  2. Turn on your Android phone's Bluetooth and Wi-Fi. Ensure the voice assistant is enabled and Wi-Fi is not occupied by another network. If your phone is already connected to another Wi-Fi, ignore it.
  3. In your Android phone's Bluetooth interface, search for and connect to 'Smart Box-****'.
  4. A prompt window will appear asking for a Bluetooth pairing request. Click "Agree" to ensure a successful Bluetooth connection.

After the connection is successful, the car's display screen will switch, and you can then use the Android Auto function normally.

Android Auto initial screen on the car display.

Figure 9: Android Auto Initial Screen

Screenshots illustrating the Android Auto connection steps: Bluetooth pairing request.

Figure 10: Android Auto Connection Steps

4.7 Using the AirPlay Function (iPhone Mirroring)

  1. Tap the "AirPlay" app icon on the device's main interface.
  2. Enable Siri on your iPhone and turn on its Wi-Fi. Ensure Wi-Fi is not occupied. If your phone is already connected to another Wi-Fi, ignore it.
  3. In your iPhone's Wi-Fi interface, search for and connect to 'Smart Box-****'. For the first connection, you will need to enter the Wi-Fi pairing password '12345678'.
  4. Open the control panel of your iPhone, click the Screen Mirroring icon, select 'Smart Box-****' and connect.

Note: For older iPhone X models, slide up the notification bar from the bottom of the screen. For iPhone X and later models, slide down the notification bar from the top of the screen to access the control bar.

After a successful connection, the car's display screen will switch, and you can then use the AirPlay function normally.

AirPlay connection steps showing Wi-Fi connection, turning on screen mirror, and connecting screen mirror.

Figure 11: AirPlay Connection Steps

iPhone control panel showing the Screen Mirroring icon and selection of Smart Box for connection.

Figure 12: iPhone Screen Mirroring

4.8 Using the Android Miracast Function

  1. Tap the "Miracast" app icon on the device's main interface.
  2. Turn on Bluetooth and Wi-Fi on your Android phone.
  3. Open your Android phone's control panel, click the Screen Mirroring icon, search for and select 'Smart Box-****', then connect.

After a successful connection, the car's display screen will switch, and you can then use the Android Miracast function normally. Some Android phones support touch screen reverse control functionality.

Note: The way to open the control bar varies for each Android phone. For Samsung phones, pull down the control bar to find Smart View.

Miracast connection steps showing turning on screen mirror and connecting screen mirror.

Figure 13: Miracast Connection Steps

How to Open the Control Panel on Some Android Phones:

Brand Path to Screen Mirroring
Xiaomi Settings → Connection & Sharing → Screen Mirroring
Huawei Settings → More Connections/Other Connections → Phone Mirroring/Multi-Screen Interaction/Wireless Display
OPPO Settings → Network & Connection/More Connection Methods → Multi-Screen Interaction/Phone Mirroring/Wireless Projection
VIVO Settings → More Connections/Network & Sharing → Smart Mirroring/Phone Mirroring/Multi-Screen Interaction
Meizu Settings → Display → Project Screen
Samsung Swipe down the notification panel → Smart View
OnePlus Bluetooth & Device Connection → Screen Projection

Note: On most Android phones, you can quickly find the screen mirroring function by swiping down the top notification panel for a fast connection.

4.9 Using Samsung Phone Wireless DeX Feature

When using the Samsung Phone Wireless DeX feature, on the host interface, turn on the Android phone's Bluetooth and Wi-Fi, open the Android phone's control bar, click the Wireless DeX icon on the screen, search for and select 'Smart Box-****' to connect. A prompt window will pop up during connection, indicating a pairing request; click Agree, and you can then use the desktop mode function.

Samsung DeX connection steps showing control panel and SmartBox selection.

Figure 14: Samsung DeX Connection Steps

5. Maintenance and Important Notes

  • Avoid getting oil or water directly into the USB-A port, as this may cause data/power leaks or short circuits and prevent the product from working properly.
  • Do not use the product in high-temperature environments for extended periods, as overheating may damage internal components and cause the product to malfunction.
  • Ensure the power indicator of the car Dongle adapter lights up, and that the USB-A port you plug it into supports data transfer.

6. Troubleshooting (Frequently Asked Questions)

  1. Car fails to enter system interface after starting: Please confirm whether the in-vehicle infotainment system's CarPlay port can be used with a wired CarPlay function. Confirm which channel the in-vehicle infotainment system has and switch to the corresponding channel.
  2. Wireless CarPlay or Android Auto cannot connect: Ensure that Bluetooth, Wi-Fi, and voice assistant are enabled on your phone. Clear the phone's Bluetooth connection history and try reconnecting.
  3. Android mirroring cannot be achieved: Check and ensure that Bluetooth, Wi-Fi, and the voice assistant are enabled. Open the phone control panel and check if the Product device has been detected and connected.
  4. Unable to mirror iPhone: Check and ensure that Bluetooth, Wi-Fi, and the voice assistant are enabled. Open the phone's control panel and check if the Product device has been searched for and connected.

7. User Tips

  • The device offers easy installation. While it may occasionally disconnect, it typically reconnects automatically.
  • Be aware of a slight delay in command selection and startup.
  • Confirmed compatibility with Passat B7 models.

8. Compliance and Support

This product complies with relevant safety and environmental standards, indicated by the FC, RoHS, and CE markings.

Compliance markings including FC, RoHS, and CE.

Figure 15: Compliance Markings

For detailed information, including the full user manual in PDF format, please refer to the official documentation available at User Manual (PDF).

No specific warranty information is provided in this manual. Please contact your retailer for warranty details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.