Introduction
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your HORACO 16 Port Gigabit Network Switch (Model ZX-SWG00160). This unmanaged switch is designed for desktop or wall-mounted use in homelab or small office environments, offering high-speed Gigabit Ethernet connectivity with plug-and-play simplicity.
Image: HORACO 16 Port Gigabit Ethernet Switch, front view, highlighting its 16 RJ45 ports and compliance with CE, FCC, and RoHS standards.
Product Highlights
- 16 x 1Gbps RJ45 ports for high-speed network connections.
- Complies with IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3ab standards.
- Ethernet Ports support 10/100/1000M self-adaptive for flexible connectivity.
- Supports automatic port flipping (Auto MDI/MDIX) for simplified cable connections.
- Panel indicator LEDs monitor working status and assist in fault analysis.
- Flow control method: IEEE802.3x standard for full duplex and Backpressure standard for half duplex.
- Features a powerful cooling design for stable performance.
- Includes port lightning protection.
Image: Illustration of the switch providing Gigabit speed transmission at 1000Mbps, with data flowing to various devices.
Image: Close-up view of the switch's side, showing ventilation holes and arrows indicating airflow for powerful cooling and stable performance.
Setup Instructions
1. Unpacking
Carefully unpack the contents of the box. Ensure all items are present and undamaged.
Package Contents:
- HORACO 16 Port Gigabit Network Switch (1 pc)
- AC Power Adapter (1 pc)
- User Manual (1 pc)
- Certificate of Inspection (1 pc)
2. Physical Installation
The switch can be placed on a desktop or mounted on a wall.
- Desktop Placement: Place the switch on a flat, stable surface. Ensure adequate ventilation around the device.
- Wall-Mounted Installation: The switch is designed for wall mounting. Use appropriate screws and anchors (not included) to secure the device to a wall. Ensure the mounting location allows for proper cable management and ventilation.
Image: The switch shown mounted vertically on a wall in an office setting, demonstrating the wall-mounted installation option.
3. Connecting Power
- Connect the AC power adapter to the DC 12V 1A power input port on the switch.
- Plug the other end of the AC power adapter into a standard electrical outlet (AC 100-240V, 50/60Hz).
- The PWR Green LED on the switch will illuminate when power is successfully connected.
Image: The HORACO 16 Port Gigabit Ethernet Switch with its dimensions (240mm length, 102mm width, 30mm height) and an EU power adapter, illustrating the power connection point.
4. Connecting Ethernet Cables
This switch features plug-and-play functionality with automatic MDI/MDIX, meaning you do not need to worry about using straight-through or crossover cables.
- Connect your network devices (computers, servers, network printers, etc.) to any of the 16 RJ45 ports on the switch using standard Ethernet cables.
- The switch will automatically detect the link speed (10/100/1000Mbps) and cable type.
- The corresponding green LED for each port will indicate the link status and activity.
Image: The switch with an Ethernet cable being plugged into a port, emphasizing its plug-and-play nature and Auto MDI/MDIX feature for easy connection without configuration.
Operating Instructions
1. Basic Operation
The HORACO 16 Port Gigabit Network Switch is an unmanaged device, requiring no software configuration. Once powered on and connected to your network devices, it will automatically begin forwarding data.
2. LED Indicators
The front panel LEDs provide visual feedback on the switch's status and network activity:
| LED | Status | Description |
|---|---|---|
| PWR (Green) | On | The switch is powered on. |
| PWR (Green) | Off | The switch is powered off or not receiving power. |
| Ports 1-16 (Green) | On | Link is established and normal. |
| Ports 1-16 (Green) | Off | Link is blocked or no device is connected. |
| Ports 1-16 (Green) | Flashing | Data is being transmitted or received through the port. |
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure that the ventilation openings on the switch are not blocked to prevent overheating.
- Environmental Conditions: Operate the switch within the specified working environment temperatures and humidity levels to ensure optimal performance and longevity.
- Power Cycle: If the switch experiences unexpected behavior, try power cycling it by disconnecting and reconnecting the power adapter.
Troubleshooting
If you encounter issues with your HORACO 16 Port Gigabit Network Switch, refer to the following common problems and solutions:
- No Power (PWR LED Off):
- Check if the power adapter is securely connected to both the switch and the electrical outlet.
- Verify that the electrical outlet is functioning correctly.
- Ensure the correct AC power adapter (DC 12V 1A) is being used.
- No Link on a Port (Port LED Off):
- Ensure the Ethernet cable is securely connected to both the switch port and the network device.
- Check the integrity of the Ethernet cable; try a different cable if necessary.
- Verify that the connected network device is powered on and functioning correctly.
- The switch supports Auto MDI/MDIX, so cable type (straight-through/crossover) should not be an issue.
- Slow Network Speed:
- Ensure all connected devices and cables support Gigabit Ethernet (1000Mbps).
- Check for excessive network traffic or bottlenecks elsewhere in your network.
- Verify that the port LED is solid green (indicating a 1000Mbps link) and flashing during data transmission.
- Intermittent Connectivity:
- Check for loose cable connections.
- Ensure the switch is placed in an area with good ventilation and not exposed to extreme temperatures.
- Consider potential electromagnetic interference (EMI) from other electronic devices.
Port Lightning Protection: The switch is designed with port lightning protection (Common mode 4KV, Differential mode 2KV, Class C) to safeguard against electrical surges. However, direct lightning strikes can still cause damage. It is recommended to disconnect the switch during severe thunderstorms.
Image: A visual representation of the switch's port lightning protection design, featuring a shield icon with a lightning bolt, indicating enhanced durability against electrical surges.
Specifications
| Feature | Description |
|---|---|
| Model | ZX-SWG00160 |
| Brand Name | HORACO |
| Switch Type | Gigabit Switch |
| Interface | 16*1Gbps RJ45 ports |
| Port Standard | IEEE802.3 (Ethernet), IEEE802.3u (Fast Ethernet), IEEE802.3x (Flow Control), IEEE802.3ab (Gigabit Ethernet), IEEE802.3az (Energy Efficient Ethernet) |
| Switching Bandwidth | 32Gbps |
| Packet Forwarding Rate | 23.8Mpps |
| Packet Buffer | 4.1Mbit |
| MAC Address Table | 8K |
| Transmission Method | Store and Forward |
| Power Supply | AC 100-240V, 50/60Hz; DC 12V 1A |
| Mainboard Power Consumption | ≤12W |
| Fan Quantity | 0 (Fanless design) |
| Surge Protection (Port) | Common mode 4KV, Differential mode 2KV (Class C) |
| Electrostatic ESD | Air 8KV, contact 6KV (Class C) |
| Operating Temperature | 0-40°C |
| Storage Temperature | -40-70°C |
| Operating Humidity | 10%-90%, non-condensing |
| Storage Humidity | 5%-95%, non-condensing |
| Certifications | CE, FCC, RoHS |
Dimensions
| Measurement | Value |
|---|---|
| Product Dimensions (L x W x H) | 240mm x 102mm x 30mm |
| Product Net Weight | 0.59Kg |
| Product Gross Weight | 0.74Kg |
| Packaging Dimensions (L x W x H) | 255mm x 125mm x 65mm |
| Carton Dimensions (L x W x H) | 535mm x 350mm x 275mm |
| Packing Quantity (per carton) | 20 PCS |
| Carton Packing Weight | 15.8KG |
User Tips
- The switch features a sturdy and solid construction with a steel casing, ensuring durability.
- Users have reported super fast data transmission, confirming its Gigabit capabilities.
- The product is generally found to function as per its listed specifications, providing reliable performance.
- Its plug-and-play nature makes it very easy to set up without complex configurations.
Warranty and Support
For detailed warranty information, please refer to the official product documentation or contact your retailer.
This product complies with international standards and holds CE, FCC, and RoHS certifications.
For further technical details, diagrams, or specific instructions not covered in this brief manual, please consult the comprehensive user manual available in PDF format: