1. Introduction
The RAGEER PCIe 5.0 X16 Riser Cable is designed to extend the placement of your Graphics Processing Unit (GPU), enabling flexible and vertical mounting options within your PC case. This high-performance cable ensures stable and high-speed data transmission, supporting the latest PCIe 5.0 standard while maintaining backward compatibility with older generations. It is engineered for enthusiasts and professionals seeking optimal airflow, aesthetics, and performance in their computing setups.

2. Specifications
| Feature | Description |
|---|---|
| Type | PCI-Express Cables |
| Brand Name | RAGEER |
| Origin | Mainland China |
| PCIe X16 Transfer Rate | 32GT/S |
| PCIe X16 Bandwidth | 64GB/S |
| Function | PCIe 5.0 extension cable, Backward compatible with 4.0/3.0/2.0, Fully compatible with most graphics cards and motherboards |
| Package | Yes |
| High-Concerned Chemical | None |
| Cable Length Options | 10CM, 15CM, 18CM, 18.5CM, 20CM, 25CM, 30CM |
| Materials | PC+ABS (High-Strength Protective Cover), 29AWG Thick Soft Shielded Cable, 4 Layers of Thickened PCB, Foxconn Shielded Connector |
| Product Weight | 0.23 kg |
| Package Dimensions | 30cm (L) x 18cm (W) x 6cm (H) |



3. Setup and Installation
3.1 Physical Installation
- Ensure your computer is powered off and unplugged from the wall outlet.
- Open your PC case and locate the PCIe x16 slot on your motherboard.
- Carefully insert one end of the RAGEER PCIe 5.0 X16 Riser Cable into the motherboard's PCIe x16 slot until it is securely seated.
- Mount your graphics card vertically in your desired position within the case. This cable is ideal for vertical GPU mounts, which can improve aesthetics and airflow while preventing GPU sag.
- Connect the other end of the riser cable to your graphics card's PCIe x16 slot, ensuring a firm connection.
- Secure the graphics card and riser cable within the case using appropriate mounting hardware (not included with the cable).


3.2 BIOS Setup for PCIe Version
If you are using a PCIe 4.0 cable with a PCIe 5.0 GPU, or encounter boot issues, you may need to manually set the PCIe version in your motherboard's BIOS. Some motherboards (e.g., HUANANZHI, Maxsun, JGINYUE) might require setting PCIe to Gen3 to avoid interference.
- Enter the BIOS/UEFI Setup Utility during system boot (usually by pressing DEL or F2).
- Switch to Advanced Mode.
- Navigate to 'PCIe/Chipset Settings' or similar options. Look for 'PCI Subsystem Settings', 'Chipset Configuration', or 'North Bridge Configuration'.
- Locate the 'Specific PCIe Speed Option' for the relevant PCIe slot.
- Change the setting to 'Gen4' or 'Gen3' as required for compatibility.
- Save Changes and Exit BIOS.


4. Operating Instructions
The RAGEER PCIe 5.0 X16 Riser Cable is designed for plug-and-play operation once correctly installed. It automatically negotiates the highest compatible PCIe speed (5.0, 4.0, or 3.0) based on your graphics card and motherboard capabilities, ensuring optimal performance without manual configuration (beyond initial BIOS settings if needed).
This cable provides 'Zero Loss, Stable Transmission', allowing you to enjoy demanding games and applications without experiencing frame drops or performance degradation typically associated with lower quality extension cables.

5. Maintenance
- Handling: Always handle the riser cable by its connectors. Avoid pulling on the cable itself to prevent damage to the internal wiring.
- Bending: While the cable is flexible, avoid sharp bends or kinks, especially near the connectors, as this can affect signal integrity. Gentle curves are acceptable.
- Cleaning: Keep the connectors free from dust and debris. Use a soft, dry cloth or compressed air to clean if necessary. Do not use liquid cleaners.
- Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
- System Not Booting / No Display:
- Ensure both ends of the riser cable are fully seated in the motherboard and graphics card slots.
- Verify that your motherboard BIOS is set to the correct PCIe generation (e.g., Gen4 or Gen3) if you are using a PCIe 4.0 cable with a PCIe 5.0 GPU, or if your motherboard requires a specific setting. Refer to Section 3.2 for BIOS setup.
- Test the graphics card by plugging it directly into the motherboard's PCIe slot to rule out other component issues.
- Performance Issues (e.g., lower FPS than expected):
- Confirm that your motherboard and graphics card are both operating at the expected PCIe generation.
- Check for any sharp bends or damage to the riser cable that might impede signal transmission.
- Ensure your system drivers (chipset, GPU) are up to date.
- Compatibility with Graphics Cards:
- Q: Are 40 and 30 series graphics cards plug-and-play? A: Yes. The RAGEER PCIe 5.0 X16 Riser Cable is fully compatible with most graphics cards, including NVIDIA RTX 40/30 series and AMD RX 7000 series, offering plug-and-play functionality.
- Power Requirements:
- Q: Do you need additional power connectors? A: No, the riser cable itself does not require additional power connectors. Ensure your graphics card and power supply are compatible and adequately powered independently.
- Cable Flexibility:
- Q: Can the product be bent? A: Yes, the cable can be bent to accommodate various case layouts, but avoid sharp bends. Flexing within reasonable limits does not affect transmission efficiency.

7. User Tips
- Verify PCIe Generation: For optimal performance, ensure your motherboard and GPU both support PCIe 5.0. If using a PCIe 5.0 GPU with a PCIe 4.0 motherboard, the cable will operate at PCIe 4.0 speeds.
- Check Case Clearance: When planning a vertical GPU mount, always measure your PC case's internal clearance to ensure the GPU and riser cable fit comfortably without excessive bending or obstruction.
- Secure Connections: Double-check that both ends of the riser cable are firmly seated in their respective slots to prevent intermittent issues or boot failures.
8. Warranty and Support
For detailed warranty information, return policies, and further technical support, please refer to the official product PDF manual. This document provides comprehensive guidance on product usage and support resources.
You can access the PDF manual here: RAGEER PCIe 5.0 X16 Riser Cable User Manual (PDF)