Introduction
The Yeelight Smart LED Bulb D1 is a versatile smart lighting solution offering full-color control, dimming capabilities, and smart connectivity. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Image: Yeelight Smart LED Bulb D1 showcasing its color capabilities and smart home compatibility.
Safety Information
- For indoor use only.
- Use in dry locations only.
- Do not use with dimmers.
- For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lamp holders and may impair contact making and lamp retention.
- Under normal use conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
Package Contents
- Yeelight Smart LED Bulb D1
- User Manual (this document, also available as PDF here)
Setup and Installation
Follow these steps to install and set up your Yeelight Smart LED Bulb D1.
1. Physical Installation
- Turn off Power: Locate the main circuit breaker (MCB) for the light fixture you intend to use and switch it to the "OFF" position to cut power.
- Install Bulb: Carefully screw the Yeelight Smart LED Bulb D1 into the E27 socket until it is secure.
- Restore Power: Switch the MCB back to the "ON" position. The bulb should light up.
2. Smart Home Connection
The Yeelight Smart LED Bulb D1 supports two primary connection methods: Matter and Yeelight App.

Image: Key features of the Yeelight Smart LED Bulb D1, including Matter and Thread support.
Option 1: Matter Connection
To connect via Matter, you will need a Matter-compatible controller (e.g., a smart home hub that supports Matter). Follow the instructions provided by your Matter controller to add a new device. The bulb will appear as a discoverable device.
Option 2: Yeelight App Connection
- Download Yeelight App: Scan the QR code in the full PDF manual or search for "Yeelight" in the Apple App Store (for iOS) or Google Play Store (for Android) and install the app.
- Open App and Add Device: Launch the Yeelight app, sign in or create an account, and follow the in-app instructions to add a new device. You may need a Yeelight hub for certain functionalities or if direct Bluetooth connection is not preferred.
- Follow Prompts: The app will guide you through the pairing process. Ensure your phone's Bluetooth is enabled.
3. Resetting the Bulb
If you encounter issues during setup or wish to pair the bulb with a different system, you can perform a factory reset:
- Ensure the bulb is powered on.
- Turn the light switch OFF and ON five (5) consecutive times.
- The bulb will flash, indicating a successful reset. It is now ready for a new pairing process.
Operating Instructions
Once connected, you can control your Yeelight Smart LED Bulb D1 using the Yeelight app, a Matter controller, or voice commands.
App Control (Yeelight App / Matter Controller)
- Power On/Off: Toggle the bulb's power directly from the app.
- Brightness Adjustment: Adjust the brightness level from 1% to 100%. The bulb offers up to 1300 lumens.
- Color Control: Select from millions of colors (RGB) or adjust the white light temperature (2700K-6500K) to suit your mood or activity.
- Scenes and Schedules: Create custom lighting scenes, set schedules for automatic on/off times, or use pre-set scenes within the app.
- Gentle Fade: The bulb supports gentle fade-in and fade-out transitions for a smoother lighting experience.
Voice Control
The Yeelight Smart LED Bulb D1 is compatible with popular voice assistants:
- Apple Home (Siri): "Hey Siri, turn on the living room light."
- Google Assistant: "Hey Google, set the bedroom light to blue."
- Amazon Alexa: "Alexa, dim the kitchen light to 50%."
Ensure your bulb is linked to your respective smart home platform (Apple Home, Google Home, Amazon Alexa) through the Yeelight app or your Matter controller settings.
Maintenance
The Yeelight Smart LED Bulb D1 requires minimal maintenance.
- Cleaning: Ensure the bulb is powered off and cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: If storing the bulb for an extended period, keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Disposal: Do not dispose of this product as unsorted municipal waste. Refer to the WEEE Disposal and Recycling section for proper disposal guidelines.
Troubleshooting
If you encounter issues with your Yeelight Smart LED Bulb D1, try the following solutions:
- Bulb Not Turning On:
- Check if the light switch is ON.
- Ensure the bulb is screwed in properly and making good contact with the socket.
- Verify that there is power to the light fixture.
- Bulb Not Connecting/Responding:
- Ensure your smartphone's Bluetooth is enabled and within range.
- Check if your Matter controller or Yeelight hub is powered on and connected to the internet.
- Try resetting the bulb (turn OFF/ON 5 times) and attempt the pairing process again.
- Restart your Matter controller or Yeelight hub.
- Ensure your Yeelight app is updated to the latest version.
- Flickering or Unstable Light:
- Ensure the bulb is not used with a dimmer switch, as this can cause flickering.
- Check for loose connections in the light fixture.
- If using a smart switch, ensure it is compatible with smart bulbs.
- Voice Control Not Working:
- Verify that the bulb is successfully linked to your voice assistant platform (Apple Home, Google Home, Alexa).
- Check your internet connection.
- Ensure the device name used in voice commands matches the name set in your smart home app.
User Tips
- Gateway Device: This bulb requires a gateway device (like a Matter controller or a Yeelight hub) to connect to your smart home network for full functionality. Direct Bluetooth control might be limited.
- Thread Network: For optimal performance and responsiveness, ensure your Matter controller supports Thread mesh networking, as the D1 bulb utilizes Matter over Thread.
- Firmware Updates: Regularly check for firmware updates via the Yeelight app or your Matter controller to ensure you have the latest features and security enhancements.
Specifications

Image: Detailed specifications of the Yeelight Smart LED Bulb D1.
| Feature | Specification |
|---|---|
| Model | YP-0846 |
| Base Type | E27 |
| Rated Input | 100-240V~50/60Hz |
| Rated Power | 11W |
| Network Standby Power (Pnet) | 0.50 W |
| Luminous Flux (Brightness) | Up to 1300 lm |
| Color Temperature Range | 2700-6500K |
| Color Mode | RGBCW (Red, Green, Blue, Cool White, Warm White) |
| Lifetime | Approx. 15000 h |
| Operating Temperature | -10°C to 45°C |
| Wireless Connectivity | Bluetooth, Thread (Matter over Thread) |
| Bluetooth Operation Frequency | 2402-2480 MHz |
| Bluetooth Maximum Output Power | 10 dBm |
| Thread Operation Frequency | 2405-2480MHz |
| Thread Maximum Output Power | 10 dBm |
Compliance and Support
Manufacturer
Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, Qingdao International Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, P.R.China.
EU Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type [YP-0846] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.yeelight.com/eu/declaration
UK PSTI Regulations
The product is in compliance with comply UK PSTI regulations, the full text of declaration of conformity is available at the following internet address: https://www.yeelight.com/eu/declaration
WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.