SLyric G01

Contents

User Manual

SLyric 2-in-1 Body Shaping Muscle Massage Equipment

Model: G01 | Brand: SLyric

1. Introduction

Thank you for choosing the SLyric 2-in-1 Body Shaping Muscle Massage Equipment. This advanced device is designed for comprehensive body and face care, offering a combination of technologies for muscle massage, cellulite reduction, fat removal, and skin tightening. Please read this manual thoroughly before operation to ensure safe and effective use.

SLyric 2-in-1 Body Shaping Muscle Massage Equipment main unit with handles
Figure 1: Main unit with small and large handles.

Key benefits of this equipment include improved blood circulation, fat reduction, increased skin firmness, and pain relief.

Endos Roller Therapy features and benefits
Figure 2: Endos Roller Therapy features and benefits, including 360-degree intelligent rotating handles and LED display.

2. Safety Information

WARNING: Please observe the following safety precautions to prevent injury or damage to the device.

  • Do not use this appliance near water, such as in bathtubs, basins, or other vessels.
  • If the appliance is used in a bathroom, always unplug it after use, as proximity to water presents a hazard even when the appliance is switched off.
  • For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Consult your installer for advice.
  • The appliance is designed to operate safely and does not present a toxic or similar hazard under normal use.
  • The appliance does not emit harmful radiation.
  • Ensure the power supply matches the device's requirements: 220-240V~, 50Hz, 600W.

For detailed safety compliance information, please refer to the official user manual PDF: View User Manual (PDF).

3. Product Overview

The SLyric 2-in-1 machine combines multiple advanced technologies for effective body and face treatments. It features a main unit with a touch screen interface and two types of handles:

  • Small Handle: Designed for use on the face, neck, and shoulders.
  • Large Handle: Designed for use on the body.

The device utilizes a combination of Roller, Infrared, RF (Radio Frequency), Photon, Vibration, and Cool technologies to achieve its therapeutic effects.

Diagram illustrating connection ports for small and large handles, touch screen, switch button, and power jack
Figure 3: Main unit features and connection points.

The treatment can be applied to various target areas including arms, facial, back, chest, waist, abdomen, buttocks, and legs.

Diagram showing various application areas on the body and face
Figure 4: Application areas for the device.

4. Setup

  1. Unpacking: Carefully remove the main unit and all accessories from the packaging. Inspect for any damage.
  2. Placement: Place the main unit on a stable, flat surface. Ensure adequate ventilation around the machine.
  3. Handle Connection:
    • Identify the small handle and large handle.
    • Connect the small handle to the 'Small handle connection port' on the main unit.
    • Connect the large handle to the 'Large handle connection port' on the main unit.
    • Ensure connections are secure.
  4. Power Connection: Insert the power cable into the 'Power jack' on the rear of the main unit and then plug it into a suitable electrical outlet (220-240V~, 50Hz).
  5. Initial Check: Before powering on, ensure all connections are firm and correct.
Main unit with handles connected
Figure 5: Rear view of the main unit showing connection ports.

5. Operation

  1. Power On: Press the main power switch button on the front of the unit to turn on the device. The touch screen will display a "WELCOME" message.
  2. Handle Selection: On the touch screen, select the desired handle (small for face/neck/shoulder or large for body).
  3. Setting Adjustment (Large Handle Example):
    • The large handle features an LED display screen, LED show light pole, and adjust speed buttons.
    • Use the 'Adjust speed button' to change the intensity/speed of the roller.
    • Use the 'Toggle rotation direction button' to switch between forward (default) and reverse rotation.
  4. Roller Replacement:
    1. Press and hold the buttons on both sides of the handle to pull out the lid.
    2. Pull out the silicone ball roller body straight from the built-in slot.
    3. Replace with a new roller.
    4. Align the shaft body and install the cover in the groove until it clicks securely.
  5. Treatment: Apply the handle to the desired area of the body or face, moving it smoothly according to the treatment protocol.
  6. Power Off: After use, press the main power switch button to turn off the device.
Detailed diagram of small and large handle controls and instructions for roller replacement
Figure 6: Handle controls and roller replacement instructions.
Diagrams showing honeycomb sphere arrangement, clockwise rotation, and counterclockwise rotation
Figure 7: Roller sphere arrangement and rotation directions.

Video 1: Demonstration of machine power-on, touch screen interface, and handle operation.

6. Maintenance

  1. Cleaning: After each use, clean the handles and rollers with a soft, damp cloth. Ensure no liquids enter the main unit. For rollers, remove and clean thoroughly, allowing them to dry completely before re-installation.
  2. Storage: Store the device and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original protective case for storage.
  3. Inspection: Regularly inspect the power cord and handles for any signs of wear or damage. If any damage is found, discontinue use and contact support.
The main machine unit in its protective shipping case
Figure 8: Main unit in protective shipping case.
Various roller heads and accessories neatly organized in a carrying case
Figure 9: Roller heads and accessories in carrying case.

7. Troubleshooting

If you encounter any issues with your SLyric 2-in-1 Body Shaping Muscle Massage Equipment, please refer to the following common troubleshooting steps:

  • Device does not power on:
    • Check if the power cable is securely connected to both the device and the electrical outlet.
    • Ensure the power outlet is functional.
    • Verify that the main power switch on the device is in the 'ON' position.
  • Handles not functioning:
    • Ensure the handles are correctly and securely plugged into their respective ports on the main unit.
    • Check the settings on the touch screen to ensure the selected handle is activated and parameters are set.
  • Unusual noise or vibration:
    • Turn off the device immediately.
    • Inspect the rollers for any obstructions or damage.
    • Ensure rollers are correctly installed.

If the problem persists after attempting these steps, please contact customer support for further assistance.

8. Specifications

Attribute Value
Brand Name SLyric
Material ABS
Power Supply Direct Current
Item Type Massage & Relaxation
Functions Body Slimming, Weight Loss, Face Lift, Skin Tightening
Technology Roller + Infrared+RF+Photon+Vibration+Cool
Output power 10-300W
Frequency 1-150hz
Target Area Legs/Arms, Body, Buttocks, Back, Calf, Hell
Origin Mainland China
Certification CE, RoHS

9. User Tips

  • Always ensure the correct handle is selected for the target treatment area (small for face/neck/shoulders, large for body).
  • Start with lower intensity settings and gradually increase as comfort allows.
  • Regular cleaning of rollers is crucial for hygiene and optimal performance.

10. Warranty and Support

For detailed warranty information, service, or technical support, please refer to the comprehensive user manual available in PDF format or contact the seller directly.

User Manual (PDF): For more in-depth instructions and technical details, please download the full user manual: View User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.