IKSLED DC1020 Radar switch

Contents

DC 1020 Radar Human Body Motion Sensor Switch User Manual

Model: DC1020 Radar switch | Brand: IKSLED

1. Product Overview

The IKSLED DC 1020 Radar Sensor Switch is designed to automatically control electrical loads, such as LED lights or small appliances, by detecting human movement signals. This sensor operates on multiple DC input voltages (3.7V, 5V, 12V, or 24V) and offers selectable sensing distances. It features a 180° sensing angle and a fixed delayed turn-off time of 30 seconds after movement ceases. The sensor can detect through non-metallic materials like wooden boards, plastics, and acrylic panels, making it suitable for concealed installations in cabinets, corridors, staircases, and similar environments. It cannot penetrate glass, metal, or cement walls.

Three IKSLED DC 1020 radar sensor switches in white and black, showing their compact size and wired connections. The image highlights a 180-degree sensing angle and optional sensing distances.
Figure 1: IKSLED DC 1020 Radar Sensor Switches

2. Specifications

Parameter Details
Product NameDC 1020 Radar-Sensing Switch
Brand NameIKSLED
Model NumberDC1020 Radar switch
Switch TypeProximity Switch
Induction MethodRadar induction
Sensing DistanceVersion A: 1-1.5 m; Version B: 3-4 m
Sensing Angle180°
Delayed Turn-off Time30 seconds
Operating Voltage3.7V / 5V / 12V / 24V DC (Low voltage: Below 50Vac or 75Vdc)
Maximum Load CurrentMax. 3A
Penetrable MaterialsWooden board, plastic, acrylic
Non-Penetrable MaterialsGlass, metal, cement walls
MaterialPlastic
Dimensions (L x W x H)43 cm x 22 cm x 11 cm
CertificationRoHS, LVD, EMC, CE, CCC
OriginMainland China
Applicable ScenarioSuitable for cabinets, corridors, staircases, and similar installations.
Product parameters table and a diagram showing the dimensions of the sensor unit as 43cm length, 22cm width, and 11cm height, with a small black sensor unit and wires.
Figure 2: Product Parameters and Dimensions (Note: The listed dimensions in the image and OCR text appear to be for packaging or a larger assembly, not the small sensor unit itself. The sensor unit itself is much smaller as depicted in other images.)

3. Setup and Wiring Instructions

The sensor unit has four wires for connection. Ensure correct polarity and voltage to prevent damage.

Wire Color / Label Function Connection Target Notes
Red (V+)Power PositiveDC power supply positive terminalConnect to power source "+" or load "+"
Black (V-)Power NegativeDC power supply negative terminalConnect to power source "-" or load "-"
White (LED+)Load PositiveLoad positive terminal (e.g., LED +)Connect to the controlled device "+"
Red (LED-)Load NegativeLoad negative terminal (e.g., LED -)Connect to the controlled device "-"

Wiring Example (for controlling an LED):

  1. Power: Connect V+ (red wire) to the positive terminal of your DC power supply, and V- (black wire) to the negative terminal of your DC power supply.
  2. Load: Connect LED+ (white wire) to the positive terminal of your LED load, and LED- (red wire) to the negative terminal of your LED load.
Wiring diagram for the radar sensor switch, showing V+ and V- connections for power input, and LED+ and LED- connections for the load. The diagram also indicates the physical dimensions of the sensor unit.
Figure 3: Wiring Diagram and Sensor Unit Dimensions
An example of the radar sensor switch connected to a power source and a load using DC barrel connectors.
Figure 4: Example of DC Barrel Connector Wiring
Various radar sensor switches with different wiring options, including bare wires, DC barrel connectors, and a USB power option.
Figure 5: Various Wiring Options (Bare Wire, DC, USB)

4. Operating Instructions

The DC 1020 Radar Sensor Switch operates based on the following principles:

  • ON Trigger: The connected load automatically turns ON when human movement is detected within the sensing range.
  • Continuous ON: The load remains ON as long as a person stays within the detection range.
  • Delay OFF: The load turns OFF approximately 30 seconds after the person leaves the detection area and no further movement is detected.
Diagram illustrating the function of the radar sensor switch, showing a person walking past a wooden board behind which the sensor is installed. The sensor detects the person and activates a light, which turns off 30 seconds after the person leaves.
Figure 6: Functionality Diagram - Detection through Material

5. Installation & Usage Notes

  • Mounting Position:
    • Install the sensor behind penetrable materials such as wood, plastic, or acrylic.
    • Avoid placing the sensor directly in front of non-penetrable surfaces like glass, metal, or cement walls, as these will block detection.
    • Recommended mounting height is 1-2 meters to ensure optimal 180° coverage.
  • Voltage Matching:
    • Only use the specified DC voltage (3.7V, 5V, 12V, or 24V). Using a mismatched voltage may damage the unit.
  • Load Limitation:
    • Do not exceed a 3A load current. For applications requiring higher loads, use an external relay or driver.
  • Range Adjustment:
    • Choose between Version A (1-1.5 m detection) or Version B (3-4 m detection) based on your specific needs. The effective range can also be influenced by adjusting the sensor's position.
  • Environmental Interference:
    • Keep the sensor away from strong electromagnetic interference sources (e.g., large motors, transformers) to prevent false triggers.

6. Troubleshooting

Problem Possible Cause Solution
No response to motion 1. Wrong voltage Check and use correct DC voltage (3.7V/5V/12V/24V).
2. Incorrect wiring Recheck V+/V- and LED+/LED- connections according to the wiring diagram.
3. Blocked by non-penetrable material Relocate sensor behind suitable penetrable material (wood, plastic, acrylic).
Does not turn OFF after leaving 1. Hardware fault Contact manufacturer for repair/replacement.
2. Person still in range Verify the person has completely left the detection zone.
Unstable load operation 1. Voltage fluctuation Use a stable power supply or add a voltage regulator.
2. Load current > 3A Reduce the load or add an external driver module/relay.

7. Maintenance

The DC 1020 Radar Sensor Switch requires minimal maintenance. Keep the sensor unit clean and free from dust. Ensure all wiring connections remain secure. Avoid exposing the unit to excessive moisture or extreme temperatures.

8. Warranty and Support

This product comes with a 1 Year Warranty from the date of purchase. For technical support, warranty claims, or further inquiries, please refer to the official product documentation or contact the seller.

A detailed user manual in PDF format is available for download: User Manual (PDF).

9. User Tips

  • Simple Wiring: Users have found the wiring process to be straightforward and easy to interface.
  • Initial Startup Time: Be aware that the initial startup time for this sensor might be longer than other motion sensors. This is normal operation.
  • Detection through Materials: The radar technology allows detection through non-metallic materials like wood, plastic, and acrylic. This means it does not rely on body heat and can detect movement even if a door is moved by wind, for example.

10. Package Contents

  • DC 1020 Radar-Sensing Switch x 1
  • User Manual x 1
The DC 1020 Radar-Sensing Switch packaged in a clear plastic bag with a small instruction sheet.
Figure 7: Product Packaging

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.